USB serial adapter works once for each reboot...

Similar Questions

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• card network disappeared on each startup but starts working well after each reboot.

  My problem is as Fallows

  1.I start my pc (windows 8) (I close that crashed my pc a few hours ago)
  2.i given cable is now connected to the internet (x red mark).
  3.I check Network and Sharing Center there is no adapter. (convenience store said is a software or hardware problem)
  4 then I rebooted my pc.
  5. now the adapter works fine and net is connected.
  This hole is on every time.
  Help, please.
  Thank you.

  Hello

  Win 8 has a new feature called quick start. It can sometimes cause problems as you mentioned as well as others.

  The best way to know if the problem is to disable and see what happens.

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

  This may or may not help your problem, but is easy to check.

  If this solves the problem, you can analyze what is not supported correctly.

  The problem is probably related to drivers for your network adapter, but quick start will worsen the problem if they are not good.

• USB Bluetooth adapter works only on windows 8

  Hi, I have a PC running windows 8. My hama-USB Bluetooth adapter does not work. I mean, I have it plugged in, the drivers have been installed automatically, I even installed the drivers on the disk. The bluetooth adapter is displayed in my devices, but I can't use it at all, if I am looking for bluetooth, it shows me nothing useful.

  Thank you very much

  Philippe

  Hi, I also had the same problem. Found the solution by downloading and installing "Bluetooth Stack for Windows by Toshiba" of

  http://support.Toshiba.com/support/viewContentDetail?ContentId=3461138

• Please help me! I had downloaded trail for lightroom now after... the serial key is requested for each adobe software? It was my dads macbook? and I don't know the old serial key? Please help, please help me! I had downloaded the trail for the light

  I was hoping to try version track Lightroom which was unssecesful now expires, can I use the adobe program I have in my macbook, the serial key is required for all software please help me...

  In an open forum, no one can help with a problem of serial number

  You must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Timeout of read with USB-serial adapter

  Hello world

  Sorry to post this kind of question again, but I spent 2 days to navigate on this forum, the forum of The Mathworks, and several web pages, I still cannot find the thing that will solve my problem

  I'm trying to control an Agilent 34970 A (with 40 channels 34908 A module) to read values of temperature thermocouples. I use a laptop (win7/64) and an adapter USB-to-serial (MCT U232-P9, who uses the Philips P87C52X2BA, not the FTDI chipset in case it makes a difference) and I installed the driver for this card. The adapter is recognized by Windows and appears as COM4.

  I put the COM port settings in Windows as they are on the unit (9600 baud, parity: none, 8 data bits, flow control: Xon/Xoff; the stop bits are not specified on the device).

  And... TADAAA... it does not work!

  I tried to use NI MAX (version 5.5), LabView (2013/32-bit version) and MatLab (R2012b) to send the * IDN? command and read the response. The part 'writing' is fine (at least it does not generate an error, but I don't know if the command reaches the instrument), but there is no response from the unit. If I try to read the COM port, I get the 1073807339 error (time-out before the operation ended). I tried to see if there any bytes that will be read at the port, but there is no...

  In LabView, I put the Xon and Xoff characters to those specified in the manual of Agilent (0x11 for Xon and Xoff 0x13), but there are a few other settings that I am not so sure: "Activate termination Char" (should be on or off? Tried both - no change) and the tank itself ending (I left it to the default '\n').

  I know this isn't really a problem NOR / Labview, but given that so many people in this community seem to have experienced this problem, I would be very grateful if someone can help solve me this problem!

  Thanks in advance

  Mathieu

  Yes.

• Driver in Windows 7 USB-serial adapter problem

  Hi all

  I had the same problems as bbartko but under windows 7 64-bit.

  I bought a Sweex CD005. with ID USB\VID_067B & PID_2303 & REV_0300.
  I tried different drivers, official of Sweex, prolific drivers and also a few other drivers on the web, non of them seem to work.
  Most of the questions are
  -Unsigned drivers: If windows does not accept.
  -Driver will not work: whenever a different error code.

  Large,

  René van Dorst.

  Hi vDorst,

  It is the responsibility of the production prrovide drivers for their hardware.  I suggest that contact the manufacture of the adapter for the correct drivers. Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No mouse usb and kbd work once Windows 7 installed on don't aspire z1 602

  When installing windows7 on aspire z1 602 kbd and mouse usb stop working and I am unable to finish installing.

  Windows 7 is not supported on your model and probably missing some drivers of Intel chipset.

• New serial key works only for CS2

  Hello

  I did all the steps of error: Activation of the unavailable server. CS2, Acrobat 7, pass a hearing 3

  and the Installation of the new CS2 worked fine, the key to series on the download site was accepted.

  I wanted to start Indesign, and he asked me again for the key.

  I gave him the key as well as Installation, but this time it did not work.

  What can I do now?

  Need help.

  Thank you.

  Solved because of Windows 7 is not compatible with Adobe Photoshop CS2 - Microsoft community

  I had to change the installation directory C:\Program~2\ because of the Version 32 bits of CS2

• Ativa usb to serial adapter won't install can't find drivers online this work. __

  Any experience with this issue?  Website of the Activa doesn't have the correct driver.

  It is a plug n play device. These devices require no driver. I suggest you to check if you are able to use this device on another computer and after return of the State.

  USB plug-and-play may be, but all devices always needs to have a driver.  No version of Windows comes with drivers for USB serial cards.

  hellofariday - please proceed as follows:
  (1) open Device Manager
  (2) right click on the USB serial adapter
  (3) select Properties
  4) click on the Details tab
  (5) look at the hardware ID

  Then do a search online for any value USB\VID & PID you see there.  You can leave the part REV.

  For example, if you see USB\VID_0409 & PID_005A & REV_0100, you would search online for USB\VID_0409 & PID_005A.  You may be able to find the drivers for a similar device that works with yours.

  Good luck
  Mark

  Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Why pre-rendered footage get a new one made once again for each play or preview?

  Dear Sir/Mdm,

  I'm a novice, please bear with me.

  I use an Asus laptop with:

  1 CPU: Intel i5-3337U @ 1.80 GHz (4 processors)

  2. operating system: 8.1 Windows 64-bit (6.3, build 9600)

  3 RAM: 8 GB

  4 DirectX: Version 11

  5 edge graphics: Intel HD 4000

  6 dedicated graphics card: GeForce GT 740 M

  7 memory dedicated video: 2048 MB DDR3

  8 Nvidia Driver version: 6.14.13.3523
  

  9 total available graphics memory: 4096 MB

  
  

  I was hoping to avoid made repeated segments of images during RAM glimpses, through scrub or proofreading.

  
  

  I wrote before the associated layers of segments filled and pre-rendered the pre-comp, who gave a sequence (in AVI format) to replace the demo.

  
  

  But when I scrub through, reading (space) or do we RAM previews, pre-rendered footage Gets a new rendering even once (for each scrub-via/preview/reading).

  Need advice.

  Thank you.

  
  

  You wrong understand how Premiere Pro handles transitions and reading. Transitions, if the codec of the original film supports, can be rendered in real time, if the source codec is not, they are rendered when you preview so that the program window, the place watch you your video edited, acts as an existing media for the video player. Through playback engine is capable of reading multiple streams of video at the same time by using the Mercury playback engine.

  After Effects is a software of compositing that pixels in layers and perform math on each pixel. If you have cache enabled and then rendered frames are not re-renderings when redo you the ram preview, but if you make any change in the scenario, everything from that point forward must be returned again because there is no easy way say which pixels will change in the layers after you make a change without the calculations.

  AE is a great tool to produce the plans and short sequences, but it was never intended to be used as an editing program to assemble movies. It is simply not the right tool for this. Editing and Compositing integration will improve as both AE are more closely integrated, but it's like that with all of the software used to create a movie. Compositing is a separate operation of the Assembly, and they are managed differently.

• 10.11.3 USB series adapter

  Hi guys, I have a serial lindy USB adapter I used on my MBP successfully for a few years... until I upgraded 10.3.11 on my computer... now have updated drivers it will see not the com port when I try to log in series.

  does anyone have a solution? or even got a USB serial adapter that they use with the OSX above?

  happy to buy a new one if I have to

  Here is what has been the Keyspan USB serial adapter. The product page claims in favour of El Capitan.

  See ace http://www.tripplite.com/keyspan-high-speed-usb-to-serial-adapter-microsoft-surf ~ USA19HS /

• Satellite L30 - required USB serial controller driver

  Hello everyone,

  I can't find the driver for USB-serial controller C for my Satellite L30.
  Needs in order to connect my Samsung mobile.

  Thanks in advance,

  Jacob

  To be honest I had never heard about USB-Serial Controller C.

  The windows operating system contains drivers own controllers USB (USB port).
  This means that you will not find any special drivers for USB controller.

  If you have some connection with the cellphone problems then I recommend to install the software that was supplied with the mobile phone. There is always a CD with the software.
  Before installing this software, you must uninstall the previous software.

  By the way; You can delete the C USB-serial controller in Device Manager and reboot the laptop. Then check if the windows will recognize this controller again.

• Automing instruments LabVIEW without using specific and coding drivers for each instrument?

  Hello

  I'm new to programming in labVIEW, but I had a few questions about its use in automation and remote controlling several instruments.

  It is an ideal software for automation of various instruments remote control/test. Assuming that I have several different companies spectrum analyzers, I understand that labVIEW drivers of instruments or special VI who would control these instruments. But if I wanted that all these spectrum analyzers to say, to display on another computer using the remote control, but I wanted to use the same program for effeciency, is it possible to do so universally for all instruments using labVIEW? Or do I have to adapt this program for each instrument to instrument drivers cause?

  If labVIEW can do that, is - anyone had good success for such scenarios in other programming languages?

  Thanks in advance for your help.

  Look for the Abstraction Layer material (that you can implement with LabVIEW, even if it's a slightly advanced topic).

  The idea of having a specific Test and be able to enforce it against different Instruments, decided at run time, is the kind of situation that LabVIEW and use of HALs was designed to facilitate.

  The concept is to 'Levels of Abstraction'.  When you create a test, you can design it for an abstract Framistan, since all the Framistans are supposed to be able to measure Vorbels in the range of 0 to 100, so you just plug a generator of Vorbel to generate Vorbels in a certain sequence of Test (linear, random, quickly, slowly, pulsatile, continuous, you decide), measure your Abstract Framistan records readings and compare with the results you expect write the results in a nice report.

  Of course, Framistat of OR uses Ethernet as the means of communication, while HP uses a serial port (depending on the model, series settings can change) and uses of the Intel one. DLL to communicate with the low-level API.  So you also need to develop, for each specific instrument, an "interface" between its API and the Framistan abstract (not everyone uses Vorbels as the input unit, for example).

  So the good news is that it can be done, the bad news is that one of the best ways of handling this type of question on the programming is to use OOP (OOP).  A number of languages (LabVIEW, C++, JAVA) support OOP, but LabVIEW might have the advantage when it comes to interact with the material.

  I you are looking for Hardware Abstraction Layer?  Add LabVIEW to the search query and you should find some nice presentations by Elijah Kerry...

  Bob Schor

• PLEADING... I NEED help with the boxes, one for each row in table.

  I have a tabular presentation I want to use to process once that will process once for each line that has had its check box selected. I worked on it... It seems... forever. I almost gave up. More than once I thought I had it all to find that I have no work.
  
  It seems always executed once for each row in the set of lines in the displayed table and I care about her contract so that the lines checked.
  
  Here is my select statement...
  Select
  APEX_ITEM. CHECKBOX (2, ISSUE_KEY, DECODE (issue_closed, 'Yes', 'CLOSED', 'No', 'DISABLED', null)) CHECK_KEY;
  TO_CHAR (ISSUE_DATE, ' ' DD-MON-YYYY HH24:MM:SS) FAILURE_DATE,.
  ISSUE_COMMENTS
  QUESTIONS
  
  
  I have a submit button that runs the following process
  DECLARE
  v_org_comments varchar2 (1024): = ";
  BEGIN
  BECAUSE me in 1... APEX_APPLICATION. G_F02. COUNTING LOOP
  SELECT ISSUE_COMMENTS
  IN v_org_comments
  QUESTIONS
  WHERE ISSUE_KEY = APEX_Application.g_f02 (i);
  
  UPDATE PROBLEMS
  SET
  ISSUE_COMMENTS = v_org_comments | » ' || : P4_X_ODF_NOTES,.
  ISSUE_CLOSED = "Yes"
  where ISSUE_KEY = APEX_Application.g_f02 (i);
  COMMIT;
  END LOOP;
  END;

  Hello

  I had the same problem. It seems that if you pass your columns to the columns in standard report it will fire for the checked columns. But if you proceed towards editable fields each line is treated as checked.
  So if you use line selector instead of manually creating check boxes and have a hidden primary key
  field, you can then use something like

  BECAUSE me IN 1.APEX_APPLICATION. G_F01. COUNTING LOOP
  UPDATE

  
  SET
  WHERE =
  APEX_APPLICATION. G_F02 (APEX_APPLICATION. G_F01 (i));
  END LOOP;