Randomly the jumplist in Windows Explorer will disappear in Windows 7

Similar Questions

• My windows Explorer will not work. The APP CRASH is explorer.exe

  The APP CRASH is explorer.exe. I can't reach all the functions on the start menu, or the screen. When this has happened, I got the internet browser, and I have no problem there. I downloaded a system check and verification of the register, but my computer only allows me enough time to launch. Close, but no. My McAfee system has been running for an hour, is 73% completed and shows no problem. I don't have my operating system CD, as wonderful HP and compaq have backup loaded on the HD to guess what? I can't access it? Any suggestions?

  Hi ReginaKinder,

  ·         What is the full error message?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know if you need more assistance.

• Internet Explorer has disappeared from the Menu start - help to restore the arrow to the right for the recent actions etc.

  After a recent update, I seemed to lose my IE icon anywhere on the computer - I couldn't find iexplore.exe when you're looking for all of the C: drive, and the icon has disappeared from the start menu.

  I managed to install a Microsoft IE links and the software works very well.  However, when pinning the IE icon to the start menu, I just got a regular icon - I don't have the right arrow to go directly to a recent site / or InPrivate browsing etc.

  Does anyone know how to restore this feature?

  See you soon

  Jim

  Hello James,

  Thanks for the quick response and the screenshot sharing.

  I would ask to try the steps mentioned below, which will help you to get the start of the page you are looking for.

  1. Demarrer start on the desktop, press Windows key + R using the keyboard to bring up the run window.
  2. Type "Inetcpl.cpl ' in the run window to open Internet Explorer the window options." "
  3. In Windows Internet Explorer options, click the option "use new tab '
  4. Now click apply and then OK.

  For more information, see the screenshot:

  

  Hope the helps of information provided. Do we know the State of the question, so that we can better help you.

• Windows Explorer will not be printed.

  A new problem as it was working before.  When you try to print from Windows Explorer (MS Windows 7), after hitting the button 'print', a bar will appear which says "is about to print"... and then disappears from the bar and no print job... nothing in the queue.  Can print from other programs without problem.  Help desk services is not a problem.

  Hi Blaine,

  Thanks for the reply.

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Local data store has disappeared from the data store window (necessary emergency aid)

  Dear team,

  I m facing a very strange problem, all of a sudden one of the local ESX datastore disappeared thereafter are full details we have encountered/noticed.

  A local data store disappeared from the data store window.able to see this data store to add storage Wizard, which allows us to format the same.

  * If we take a session putty from here we can see and browse this store of data without problem.

  * Virtual computers that are running on this data store work as well (all files are accessible / VM is accessible on the network)

  * Unable to take backup image do error "the object has already been deleted or was not completely created.

  * Not able to take a «cannot complete the copy file... network» clone »

  Getting from newspapers in vmkernel:

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceIO: 747: command 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed, the data of sense H:0 x D:0 x 2 P:0 x 0 0 valid: 0 x 4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu1:4097) ScsiDeviceToken: 293: Sync IO 0 x 28-the device 'mpx.vmhba1:C0:T1:L0' failed: error/o H:0 x D:0 x P:0 x 0 2 0 valid sense data: 0x4 0 44 x 0 x 0.

  (14 dec 17:11:39 localhost vmkernel: 0:01:55:28.677 cpu6:4110) capability3: 5354: Sync READ error ('. fbb.sf') (ioFlags: 8): i/o error

  Need your help urgently to solve the same.

  concerning

  Mr. VMware

  

  Dear all,

  We have enclosed a case at VMware, please find their findings on the same.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  After the webex session, we just had, I discovered the root cause of the problem reported to an underlying problem on the block device (the logical drive, or a problem on the Board) presented to accommodate the data in question store successfully.

  In short, whenever we try to do raw reading from the disk (from sector 0), the same always fail when we reach the 30932992 bytes (31 MB) brand with an IO error (which is consistent, he is always on this region of the disc that read operations fail, no more, no less). This result can be seen, even if no partition is in the disk (using if = / dev/sdb instead of/dev/sdb1 with dd) and even after zeroing on all sectors (if dd \u003d/dev/zero of = / dev/sdb). Strangely, read operations work fine (as he writes zeros of random data) throughout the entire disk. Keep in mind that the tests I did with no VMware tools (I used almost only dd for these operations), which prohibits certainly a VMware problem (in fact, if you were to try to start the server with a Linux live CD and run the same tests that I did, you would see the same behavior).

  I know that there is no report of material of any bad behavior on the table, but data collected with our tests today completely invalid who. The next step is for you to take this to the server provider to check for problems on the table or discs, because they are there and they are the reason for the problem you reported initially.

  Please let me know if you have other questions about it.

  Thank you

  -

  David Meireles

  Technical Support Engineer

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Now we have blocked a case from the hardware vendor, to see what the next move will be.

  concerning

  Mr. VMware

• Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

  original title: problem with shdocvw.dll

  Hey guys just a quick question.

  bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

  a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

  Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

  It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

  see you soon

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link below to ask your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• IE 8 will not save the history in windows xp

  IE 8 will not save the history in windows xp. All good Internet Options boxes checked/unchecked. System Restore has not fixed the issues. Possible registry problem?

  Hello
  I suggest try reseting IE and check.
  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737
  
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
  

• After WSUS downloaded and installed the most recent Windows XP and 7 updates, we encountered the following error: page of the Intranet Web displayed in Internet Explorer (8 or 9) is on SERVER_A

  After that WSUS installed and downloaded the most recent Windows XP and 7 updates, we encountered the following error:

  The Web page of the Intranet being viewed in Internet Explorer (8 or 9) is on SERVER_A
  and the page contains a link to a file on a network share on the Serveur_B, making the href path something like
  'http://SERVER_B/myShare/myDocument.doc '.
  ... then it does NOT work.

  If the Intranet Web page being read in IE (8 or 9) SERVER_A on
  and the page contains a link to a file on SERVER_A, making the href path something like
  'http://IP..ADDRESS/myDocument.doc '.
  ... then it does not work.

  Before these updates, the system worked flawlessly.  We try to identify the update that caused this problem, but 28 of them fell on a Tuesday.  (22/11/2011).   These questions are the same with IE8 or IE9 and WindowsXP and Windows7.

  Has anyone seen this problem?

  Thanks, Jim

  It is a specific consumer support forum.

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

  You will find support for Windows XP in an enterprise in this forum environment: http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

• In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"

  I get the error message "Windows Explorer has encountered a problem and needs to close".
  It occurs at any moment while I'll do something on my computer.
  The signature of the error is,
  App name: explorer.exe
  App version: 6.0.2900.5512
  The mod name: unknown
  Mod Version: 0.0.0.0
  Offset: 4ec683bd

  After the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.

  I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.

  Can someone please?

  * original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*

  Hi Jaaz76

  
  Method 1:

  You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Method 2:

  Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow

  c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time

  d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/310747

   

  I hope this helps.

• I can't view my photos, no thumbnail shows, and Windows Explorer will crash if I try

  All of a sudden I can't see my pictures in Microsoft Office Picture Manager instead of the default (don't remember what it was called Photo Gallery?).  When I open any image file on my computer, it will show the name of the photo, but no thumbnail preview is displayed.  Even my desktop wallpaper, which was a picture of my computer, now is just empty.  When I try to upload photos on Facebook from my computer, Firefox or Internet Explorer will crash.  Help!

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-thumbnail-previews-in-Windows-Vista-Explorer/

  Try this

  It has less organize - folder and search options menu uncheck the "always show icons...!

• Cannot move all the files as windows explore crashes - it happens every time when you use an external hard drive (several readers have been tested and work on other machines)

  I need to move files on my laptop, but windows crashes Explorer everytime I try this. This also applies when you use an alternative program to explore. It didn't happen last week but regularly spent the last six months. It is now that I need to migrate these files (mainly the images, but also the music and office documents).

  The error in the Event Viewer log States the following: start the application failing application Explorer.EXE, version 6.0.6002.18005, time stamp 0x49e01da5, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, offset 0x02db07e0, process id 0 x 1650 error, time 0x01ca547fd1de6851.

  Thank you

  Make sure that the device is compatible with Vista, the Vista Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-vista/default.aspx.

  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  You need to find the NAS device and the NICs in particular - but it would not hurt to look at all the when you're there.

  Go to start / Control Panel / Add Hardware and select the first option (recommended) to see if the system can detect the device.  If this does not work, choose the second and provide the information requested on the device.  You will be asked for drivers - have their practice.  Follow the prompts to install the device (NAS).  Make sure that it is plugged in and turned on when you do so, or he not be recognized.  It's the hard way of installing a hardware device, but your system obviously isn't automatically recognize it then do it manually. Here is a brief tutorial on how to do so: http://www.web-articles.info/e/a/title/Windows-Vista :-Running-the-Add-Hardware-Wizard /.

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• AutoPlay disappears after you select an option on the automatic playback window

  Original title: burn files to disk is unusable

  When I insert a blank CD - R disc, AutoPlay appears and asks what I want.  When I choose to burn files to a disc using windows, the menu autoplay disappears and appears to be disabled in some way.    I want to put photos on the disk.  I have Windows Vista.

  Hi JCC01,

  1. have you any Microsoft burning CD/DVD program installed on the computer?

  Try these steps and check the result.
  Step 1: If you have any non Microsoft burning CD/DVD programs installed, then uninstall them
  a. see Uninstall or change a program
  b. Once you have deleted the program, restart the computer and check the difference.

  Step 2: If the problem persists, disable all non-Microsoft programs to check if one of them is causing the issue
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  You can also burn CDs with Windows Media Player, see burn a CD or DVD in Windows Media Player

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mouse over the action in Windows Explorer

  Hello

  I would like to know if it is possible to create a script to change the text displayed in the pop-up box is displayed on a mouse over action in windows Explorer?

  Now I can see things like 'Type', 'Authors', 'Size' and 'Update' by default, however, if could change this I might add meaningful text to describe the contents of the file without having to see it. For example, I would add ' Note: Table 14.2.1.1' in a particular file so that it appears in the pop-up window when I do a mouse over action.

  Any help gratefully received.

  TIA.

  

  Those who can be changed inside the file in the design program. In this case, Microsoft Word.  While you have the file open in Word, click the file menu at the top and then choose about.  You will see the available metadata fields that can be edited.  A fixed set of these will also show in the ToolTip.

  In your file Explorer, you can also surface several of these data by turning on your details pane, that in Windows 7, shows at the bottom of the file (footer).

• Windows 7 Home Premium - all user accounts have disappeared after the update of Windows...

  My Windows 7 Desktop is really watered.  After a Windows automatic update, none of the user accounts appear in the login window.  Only a generic connection where you will need to enter the user and the password are displayed.  And when I enter the user name and password, I get a message that they are not valid.

  Here are a few additional pieces of information:

  1. I tried to restore to the point before the update, but it fails.  I get a message that there are missing files.

  2. my other restore points I had before the update are no longer available.  I don't know what happened to them that they do not appear on the screen of restore points.

  3. I can't log on to the computer at all, none of the accounts work.  I can get to a command prompt by using the repair disk, and I can see all the folders for the users.  So everything is intact.   Something must have happened to some system files and thus connect is not possible.

  4. users appear in the list of profiles in the registry.

  5. no windows service start because none of the users are no longer valid.

  6. I tried sfc/scannow, but I get an error "already waiting.

  7. I tried to add users on the command line using net and they are successful but even when they do not appear on the login screen and I can't manually type in these user accounts - I get the message that they are not valid.

  I tried searching online and I'm still not able to connect to the computer.  It has been 2 days of downtime.  What happened to my old restore points?  And why doesn't my restore points created by the work of windows update?

  I want to just restore from factory default, but I'm afraid I'll lose data in particular, all of the files currently sitting in the user folders.

  Any advice would be much appreciated.

  Greg Lang

  E-mail address is removed from the privacy *.

  Here are a few comments:

  1. I tried to restore to the point before the update, but it fails.  I get a message that there are missing files.

  -> Which files are missing? Can you give an example?

  2. my other restore points I had before the update are no longer available.

  -> This happens after the automatic updates.

  5. no windows service start because none of the users are no longer valid.

  -> How to tell you, because you were unable to connect?

  7. I tried to add users on the command line using net and they are successful but even when they do not appear on the login screen and I can't manually type in these user accounts - I get the message that they are not valid.

  ->, I guess you have done this so that in the WRE (repair Windows environment). It is a ghost environment that disappears that you restart the system. Drive X: is a virtual, not a real disc.

  I want to just restore from factory default, but I'm afraid I'll lose data in particular, all of the files currently sitting in the user folders.

  -> Many people are unaware of the need for regular backups (for example, weekly) until they are suffering from a major disaster.

  Suggestions

  Going by your description, I suspect that your existing accounts are irreparable. They need to be rebuilt. User data appear to be safe.

  Option 1. Use the console commands then in WRE to save all the files of the user on an external hard drive. A disk 2.5 "500 GB in a USB enclosure costs less than $60,00. After having tested the files on another machine, perform a destructive factory restore.

  Option 2. Start the computer with a boot of Ubuntu CD, then its GUI allows to save files to the user. It takes time to burn such a CD, but the copy process is easier. When you're done, do a factory restore.

  Option 3. A somewhat complex process allows you to create a new admin account, and then use this account to create new user accounts. You must then manually configure each of them (for example Outlook) and move their records of the old data to the new profile folders.

  There is also a method to restore old files registry of a set of backup files are a few days old. In your case I wouldn't consider as it would create a disjoint system: the registry files refers to a set of files that have been largely modified by the update.

  Post again if you need more detailed instructions for the option that you favor.

• for the family of Windows security popup will not except my password

  Related to: Family Safety: frequently asked Questions

  

  This popup occurs often and at random times on my PC. It will not except my windows password, I used to log on here to ask for help. I tried to change the passwords, and again, it will not work and do not except the new password if it links to the view. I have a child I want to keep monitoring, but think I should remove the program. Is there any solution for this?

  Hi Paul,.

  Thanks for posting your question in the Microsoft forums.

  Form of the description of the question, I understand that you are facing problems with the signature in the Family Safety website.

  It seems that your windows account direct parent is not correctly set up as a main Windows Live Family Safety customer e-mail address. As a first step of troubleshooting, please re - install computer Live parental controls, you were not able to access http://fss.live.com/. Please refer to the steps below:

  A. re-setup email address Parent

  1. customer open Windows Live family safety
  2. If the guest with sign in window, connect with the parent account
  3. click on connection
  4. try to access Windows Live Family Safety site: http://fss.live.com/

  If it is still impossible to have access to, the reinstallation of the product.

  Customer B. uninstall Windows Live Family Safety

  1. in Windows 7, click Start, select Control Panel
  2. under programs, click uninstall a program
  3. Select Windows Live Essentials, and then click Uninstall/Change
  4. click on remove one or more Windows Live program
  5. Select Windows Live Family Safety in the list, and then click Uninstall of

  C. reinstall Windows Live Family Safety from this link

  D. Once successfully installed, sign in using your credentials to the mother and then go again site Windows Live Family Safety.

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.