Range of adjustment for the Slider control

Similar Questions

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• How to remove the decimal value (. 00) of the slider control

  Please ask me how to remove the decimal value (. 00) of the slider control and Add (if possible) % in after effects cs6.

  I guess you mean to animate text with a slider.

  Add a slider (options for expressions) to your text layer and then add this expression in your Source text:

  x = Math.Floor (effect ("Slider Control") ("Slider"));

  x+" %"

  That's all

• Fix for the slider to the left?

  What is the benchmark for the slider to the left? At the first signing, Windows 7 Ultimate, I type the first letter of my username, and the cursor moves to the left. I have to delete the first letter and start again my user name and then the cursor behaves normally. Also sometimes happens during the seizure of a document or type something in 'search '. I type the first letter, the cursor moves to the left and I have to delete the first letter and retype and then everything's fine. I use a keyboard and a wireless logitech mouse.

  It seems to me that it is of course a problem with Logitech drivers.  I don't know what else to try other checking Logitech for updates.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Password for the Parental control reset blackBerry Q5

  What part of the custom restoration contains the password for the 'Parental control'? I forgot one I have and need to reset it.

  Very probably the settings part that will hold but I don' t know for sure.

• How to change the "timing" for the slide show

  How can I change timing for the slide show?

  Hello
  
  a. on which application would you like to change the "timing" slide show?
   
  In the windows photo viewer, you can change the speed. When the slide show is running, right cick anywhere on the image and choose slide show speed slow, normal or fast.
   
  See your pictures as a slide show
  http://Windows.Microsoft.com/en-us/Windows7/see-your-pictures-as-a-slide-show
   
  If you want to change the timing of wallpaper slideshow see article below.
  Create a desktop background slide show
  http://Windows.Microsoft.com/en-us/Windows7/create-a-desktop-background-slide-show
   
   
  Hope this information was useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I set different background color for the slider?

  Hello
  I want to set a different color for track Slider, slider track is spitted into two sections by slider-button.
  I want to put a left gray, the right of a white.
  Under css only changes the background of the entire track, but how I can change different background color for the slider?
  Any suggestion?
  

  .slider {
      -fx-border-width: 0;
  }
  .slider *.track {
      -fx-background-color:white;
      -fx-background-insets:  0, 1;
      -fx-border-color: #faf0e6;
      -fx-border-width: 1;
      -fx-border-style:solid;
      -fx-progress-color:yellow;
      -fx-border-radius: 20;
  }
  .slider.knobStyle:focused .knob {
      -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 );
  }
  .slider.knobStyle:unfocused .knob {
      -fx-effect: dropshadow( three-pass-box , red , 5 , 0.5 , 0 , 0 );
  }
  .slider .thumb {
       -fx-background-color:rgb(224,225,226);
       -fx-background-repeat:stretch;
       -fx-background-size:stretch;
       -fx-background-position:center top;
       -fx-background-image:url("../images/volume_ball.png");
          -fx-padding: 10;
  }

  I don't know why I can't get the node of the track, track has always set to null and the thumb or the other.

  After that the cursor was displayed on an active scene are you doing research?

  (ex.: after you have added the slider to a scene, the scene for scene, then called stage.show ())

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• Using aliases for the indicators, controls, procedures and calculated channels

  Hello

  I noticed that aliases do not appear in the workspace for the controls and indicators and procedures system Explorer and see calculated. Is there a way for them to appear? I need to use aliases because I like my definition of the system to control several test systems (which have different CAN report names). Otherwise my system definition would break every time I go to another CAN the database. I thought that the inability to address limited to the configurable alias controls add on, but it seems that VeriStand natively cannot address the areas I would like to also well done right click. Any recommendations would be welcome.

  Thank you.

  You are right that you cannot use alias in a file system definition for mapping purposes. It is an area that we hope to improve in the future. The initial design of alias was to serve as a public interface for the workspace, profiles of stimulus and so on. However, it is certainly a use case valid to be used as an interface in a system definition.

  A possible solution would be to create a set of user channels that play the public role of your interface in your system definition. Always use your user channels in all procedures, calculated channels and so on. Map your CAN channels on these channels to the user. Whenever you update YOUR database, you must remap the new CAN channels to the appropriate user channel. You can also automate this activity by importing a file delimited by tabs on the mappings page. The one drawback here is that your target will take a little more time to deal with these mappings.

• Property for the tab control node

  Hi, please explain the difference between the two operations explained below. For reference, I here enclose pictures of towing.

  Theoretically, according to the the help page in labview, when I have quand j' ai mis set 'allow the colors multi property' true, can I change the colors of the page in the tab control. But here, the program runs in reverse. When I set this property to false and run a program, a tab control object in front of Panel will change the color, I gave (first image with control of bule color tab). When set to true, the execution of a program, it is default (second image, control tab by default) color. I don't know how it goes. Thanks in advance

  

  You should get the reference of the tab Page and change the color individually if you want.

  -Set the multiple colors allow TRUE: https://zone.ni.com/reference/en-XX/help/371361J-01/lvprop/tabctrl_allow_multi_clrs/

  -Get each reference page:https://zone.ni.com/reference/en-XX/help/371361J-01/lvprop/pagesel_pgs/

  -Then choose color you want: https://zone.ni.com/reference/en-XX/help/371361J-01/lvprop/page_clrsfg_clr/

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• Sampling frequency of adjustment for the analog output of sine

  Hello

  I tried to do something very simple: using an analog output card PCI 6221 to produce a frequency 50 Hz sine curve. For this I used a Vi to create a curve sinus and different screws DAQmx. But I have trouble understanding the principle of virtual channel and I think I do an error of adjustment of the sampling frequency and number of samples: once for the vi, second time sine "DAQmx - synchronization. Can I use the same values for both of these screws?

  On my oscilloscope, with frequency = 50 Hz and the sampling frequency = 1 kHz, I get a null signal. Then according to two values, I'm differently evaluated signals. For example, with f = 1 Hz and sr = 10 kHz, a frequency 0.7 Hz sinus.

  Make sure that the start for the analog input task occurs after the analog output.  By plugging in the wrong thread to an analogue output start task first, and then to the start task, you guarantee that the AI cannot start until after the startup of the AO.

• Using more of a structure of the event for the same control in a machine to standard reports

  Hello

  I'm working on a test sequence using a machine standard reports in the examples of LabVIEW.

  Part of my test, I displays a waveform on a graphic scale. The entry for this is a PXI-4070 DMM. This goes into a "while loop" update permanently the waveform. The screen simulates an oscilloscope. The test operator must make adjustments while watching this screen. This bit is working and I have no problem here.

  On my front, it has a "continue" button to the next part of the test once the adjustment is done. Some changes are then made to the configuration and the following adjustment must be made the same way, that is to look at the screen, make the adjustment, press on ' continue. Is where I have the problem.

  I tried using the event structures in the while loop the loop stops when you press the button continue. This works for the first adjustment, but when the test arrives at the second stage of the adjustment, the event seems to "remember" and the loop ends immediately.

  Is it far from resetting the event so that the button can be used again in a good way

  Kind regards.

  
  

• Help for the parental control on Vista administrator account

  Computer of my son is running Vista and I set parental controls in place through the administrator account, there a nonadministrator account.

  I changed the password after that we had a few problems with the controls, and now I want to change the settings again. However, the old password allows for parental control (IE, he allows his account access websites and bypass control, etc.), but when I try to access the administrator account, it says the old password does not work. When I enter the password, account says I don't have the login procedure and kicks back me to the main screen of Vista (where I take which account to enter).

  So, I'm stuck administering the account due to a conflict in the parental control passwords. If I try to reset the password, the computer ask me a USB stick with the old password on it information. It is a step that I did not.

  Any way to disable the administrator account? Or somehow remove/reset the parental control account access restrictions that I am experiencing?

  "when I enter the parental control in the non-administrative account, the system simply ignores the password that I entered"

  I suggest you read this info below on who has access to parental controls and how it works:

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Link above has a very good tutorial on how to set up Parental controls.

  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  Also, read the tutorial above and the 'Related links' tutorials to vistax64.com.

  See you soon.

  Mick Murphy - Microsoft partner

• OS 6.0 - Bug in the user interface for the custom control

  Hello

  I discovered a bug of UI on OS 6.0 with one of my UI controls. It seems to be linked to the control itself and how it is the calculation of the width. If my screen is full screen, painted correctly control, but as soon as I change the subLayout of the screen, the control still has a full screen width

  I spent a few hours trying to understand this one... but I can't seem to get their hands on the issue. I am sure that he as to do with the way in which it is the calculation of the width of the control of 99%... If someone could point me in the right direction would be appreciated...

  Thank you

  See the code snippet below

  UITest class

  public class UITest extends MainScreen
  {
    public UITest(long style)
    {
      super(style);
  
      add(new ButtonField("This is my test button", ButtonField.USE_ALL_WIDTH));
      TextBoxField ActionLog = new TextBoxField(0, 75, TextBoxField.USE_ALL_WIDTH);
      HorizontalFieldManager hfm = new HorizontalFieldManager(Manager.USE_ALL_WIDTH);
      hfm.setBorder(BorderFactory.createSimpleBorder(new XYEdges(), Border.STYLE_SOLID));
      hfm.add(ActionLog);
      hfm.add(new ButtonField("This is my test button", ButtonField.USE_ALL_WIDTH));
      add(hfm);
    }
  
    protected void sublayout(int width, int height)
    {
      layoutDelegate(width - 40, height - 40);
      setPositionDelegate(10, 10);
      setExtent(width - 20, Math.min(height - 20, getDelegate().getHeight() + 20));
      setPosition(10, (height - getHeight())/2);
    }
  }
  

  Class TextBoxField

  // http://na.blackberry.com/eng/devjournals/resources/journals/jul_2005/creating_textbox_field.jsp
  public class TextBoxField extends VerticalFieldManager
  {
  
    private static int PADDING = 2;
    private static int DEFAULT_WIDTH = 100;
    private int _managerWidth;
    private int _managerHeight;
    private String _pattern;
    private EditField _editField;
  
    public TextBoxField()
    {
      this(0, 0, Manager.USE_ALL_WIDTH);
    }
  
    public TextBoxField(long style)
    {
      this(0, 0, style);
    }
  
    public TextBoxField(int width, long style)
    {
      this(width, 0, style);
    }
  
    public TextBoxField(int width, int height, long style)
    {
  
      super(Manager.NO_VERTICAL_SCROLL | style);
      _managerWidth = width;
      _managerHeight = height;
  
      VerticalFieldManager vfm = new VerticalFieldManager(Manager.VERTICAL_SCROLL | style);
      _editField = new EditField(style)
      {
        public void paint(Graphics g)
        {
          super.paint(g);
        }
      };
  
      vfm.setPadding(PADDING, PADDING, PADDING, PADDING);
      vfm.add(_editField);
      add(vfm);
    }
  
    public int getPreferredHeight()
    {
      int fontHeight = getFont().getHeight() + (2 * PADDING);
      return (fontHeight > _managerHeight) ? fontHeight : _managerHeight;
    }
  
    public int getPreferredWidth()
    {
      if (_pattern != null)
      {
        return getFont().getAdvance(_pattern);
      }
      else
      {
        if (_managerWidth == 0)
          return DEFAULT_WIDTH;
        else
          return _managerWidth;
      }
    }
  
    public void paint(Graphics g)
    {
      super.paint(g);
  
      // BUG FIX: 17-08-2010
      // Before drawing the border, save the current color, after
      // change the color for the border, paint the border and re-set
      // back to the original color.
      int prevColor = g.getColor();
      g.setColor(Color.BLACK);
      g.drawRect(0, 0, getWidth(), getHeight());
      g.setColor(prevColor);
    }
  
    public void sublayout(int width, int height)
    {
      if (_managerWidth == 0)
        _managerWidth = width;
      else
        _managerWidth = getPreferredWidth();
  
      _managerHeight = getPreferredHeight();
  
      super.sublayout(_managerWidth, _managerHeight);
      setExtent(_managerWidth,_managerHeight);
    }
  
    public String getText()
    {
      return _editField.getText();
    }
  
    public void setText(String text)
    {
      _editField.setText(text);
    }   
  
    public int getTextLength()
    {
      return _editField.getTextLength();
    }
  
    public void setTextWidthPattern(String pattern)
    {
      _pattern = pattern;
    }
  };
  

   

  No, PopupScreen was still available. We have certainly used it in 4.2.1 but it was available before that as well.

  With PopupScreen, create it with your manager custom as a delegate.  In this handler, override sublayout to do most of the work. Sublayout of PopupScreen can contain a single functional element, if you wish: setPosition (x, y) (after the call to super.sublayout). SetExtent of the delegated manager will have an impact on the parent company PopupScreen fine (the screen apply the theme to the Manager and take more room, but it's OK).