Fix for the slider to the left?

Similar Questions

• Anyone know a fix for the problem of gel (Xoom)

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  
  

  Greeting debuisson,

  Welcome to the Support Forums!

  Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).

  Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.

  Please let me know what you find.

  -Doc

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Someone at - it a fix for the slide show does not not in Live Mail 2009

  I searched Google and Microsoft and that you have not found a fix for a problem with the thousands or millions.

  The Microsoft Mr. Fix did not work or anthing else I tried.

  Live Mail is an E-MAIL program not an image viewer...

• When do you expect a fix for the google toolbar? I'm only an estimate not an exact date!

  I won't install the update until I have an idea when the fix for Google toolbar will be expected. I have programs that run only on Firefox using the Google toolbar. For me, it is very relative and distracting when the pop-up window appears with the updated info. and I'm not able to do anything. Your comments would be very helpful. Yet once again, I don't have exact date! Just sort of calendar or if I'm looking at a year, 6 months or what...

  You are welcome.

  Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

• update to the fix for the patches to update the features that we didn't

  http://community.vzw.com/T5/droid-X-by-Motorola/update-to-4-5-602-problems-and-overall-Verizon-issue...

  keyboard bug everyone

  read carefully, it looks like thay are working on a new generation of gingerbread for us... could it be true, I guess that we won't have confirmation... but its nice to see him go a VZW emp... those who pray, do, those who do not, sing or something that we get a fix to correct for the correction...

  Oh, and he's the current GB version 2.3.5 fixed camera, audio codecs, shutdown (maybe) questions, 00:00, and so on and so forth, sprinkled with a full tub of unlocked bootloader stuff... remember this comment and the promise...

  http://www.wired.com/gadgetlab/2011/04/Motorola-bootloader/?utm_source=FeedBurner&utm_medium=feed&UT...

  turns off the song by holding all wrong

• Does anyone has found a fix for the black screen of death on Mass Effect 3 on Xbox 360?

  My game Mass Effect 3 crashed on Xbox 360.  It freezes and becomes a black screen of death just prior to the start menu.  For some reason, is that xbox live associated profile.  It works on any profile other than the one I used and played through all 3 games.  I spent an hour and a half with xbox live support and they could not solve the problem. They also recognized that I'm not the only one with this problem.  We tried to remove and reinstall my profile, I downloaded my profile on the hard drive of my another xbox 360 console without result. We also moved all the parties backed up to the cloud and remove all content of Mass Effect 3, still no luck. They suggested that I come here and try to find answers and start a rallying cry for a patch to fix this problem.  It's extremely frustrating after playing every game Mass Effect 3 thanks to several times that all of my choices and just saved games be erased by a stupid bug in the game.  I have hundreds, if not thousands of hours invested in the series.  I don't want to start over with Mass Effect 1 and play through it again on a new profile.  Who can say this bug won't happen on my new profile anyway?  Please, if anyone else has this post problem here if you have resolved, or simply to add your voice to those who need this fixed a bug.  Thank you.

  Hello

  This forum is supported only for the Windows operating systems (have no idea why they told you to come here), so I suggest you to stay in touch with Xbox support.

  XBOX support:
  http://support.Xbox.com/en-us/games/browse#games%2Fpc-games%2FNavigationList {2} Ms

• Does anyone has found a fix for the update of VISTA KB275842 error 80070490?

  Anyone found a fix for VISTA KB275842 error 80070490, or none of the solutions or help?

  80070490 ERROR_NOT_FOUND

  Corrupted system file

  You will need to perform an upgrade on the spot or reinstalling the operating system.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833>

  `~`

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error.

  To learn more about this tool, go to which is the analysis of system update tool? on the Windows website. http://support.Microsoft.com/kb/947821>

  If the system update readiness tool solves the problem, you will need repair Windows.

  Repair Windows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD.

  To repair Windows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the Windows DVD into the drive of the computer. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click Start and type Drive: \setup.exe in the search box, where drive is the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  `~`

  I hope that's enough to put you on the right path for nºw.

  Let us know how it works ºut.

  Good luck

  The current time and the date now in France is

  22:04

  Tuesday, March 26, 2013
  Central European time (CET) + 0100 UTC

  UTC/GMT is 21:04 Tuesday, March 26, 2013

  Current weather conditions in Paris

  Cloudy4 ° C / 39 ° F

• Is their a fix for the extreme lag by using Telnet on a vista machine?

  Extreme lag with vista telnet, no fix for this issue?

  Hello
   
  • What exactly are you trying to accomplish?
  • What is the error message that you receive?
  • How long you have been facing this problem?
  • What changes were made before the grant took place?
   
  Reply back with more information, helping us to better understand the issue.
   
  See also: http://support.microsoft.com/kb/555375

• I found the FIX for the problem of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah,

  Thanks for the valuable information and goot to know that you were able to correct and solve the problem.

• FIX for the problems of HP4500 ink cartridge!

  I had problems with my ink cartridge three colors... just like many others. After searching endlessly with no solution to the problem, I decided to take a flashlight and look inside the printer. What I found was a piece that had become crooked behind my color cartridge. It was a simple solution... I took a long thin to flat head screwdriver and pushed very GENTLY in place. I then ran a TEST PAGE and ALIGNMENT before I printed anything... it worked! Here is a picture I took before I did the setting of the insert on the left hand side, it's here that the color cartridge is going... If you notice, it appears to be crooked... he slipped easily right now in place. I've reintroduced the cartridges and closed the door. IMPORTANT * make sure that you unplug your printer before attempting to solve this problem * good luck and hope it's a permanent and not temporary solution

  Hi coolinutah

  Thanks for the detailed post and photo

  

  Ciara

• Cannot run the fix for the improvement of the IOM to IOM 11.1.2.0.1

  Hi Experts,
  
  I'm upgrading to IOM for the new patch 11.1.2.0.0, in the guide that the step is given as
  
  

  Set the ORACLE_HOME directory in your system. For example:

  setenv ORACLE_HOME/opt/oracle/mwhome/Oracle_IDM1
  Apply the hotfix for the ORACLE_HOME bundle by using the following command:
  opatch apply

  I do the above given steps, but I'm not able to run the fix it givens me error
  
  

  bash: opatch: command not found

  Help, please!

  You must add OPatch to the PATH variable before running the command opatch.

  OPatch folder is home of the IOM.

• Fix for the problems of release of WebHelp with IE 11 breaks search

  I use RoboHelp HTML 9 and you had problems with WebHelp generated in IE 11. The table of contents was completely empty and the 'Search' tab was going well, but have not worked. Everything worked fine in Firefox. After much research online and experimenting in these forums and elsewhere, I was able to get the table of contents to display properly in IE 11 (and Firefox), but the fix caused the Search tab to stop functioning in accordance with this other forum post RH9 Webhelp search function does not work properly.

  I need to have BOTH COT and research displays and works correctly but in order to get the table of contents displays correctly I had to change the preferred Format "Pure HTML" and, according to the above-mentioned position setting, it's what messes up the search function. is there a solution that will enable the TOC and research work properly?

  Here is a summary of the steps I took to get to this point:

  • Tested WebHelp output of two different projects myself so that the startup project Salesbuilder - all would display or function properly in Firefox but not in IE (empty TOC and non-functional research) 11.
  • Find a "patch" for RH10 exactly the problem I have experienced with RH9 but wasn't able to find a version for RH9. Since the patch included only 2 files (whutils.js and whver.js), I saved these files in the RoboHTML\WebHelp5Ext\template_stock directory and replace them with the new.
  • Regenerated one of my RoboHelp projects - still does not work in IE 11 and now does not work in Firefox either!
  • Tried to turn on mark of the Web but this did not help and did not allow for opening PDF that is necessary for one of the projects, I turned it again.
  • Change the preferred Format setting "Pure html" instead of "DHTML" and the table of contents displays and worked properly in 11 IE and Firefox! Hooray!
  • Celebrated for 10 seconds until I clicked on the "Search" tab and see the input box filled with letters of the alphabet with other random letters, words, numbers below. It looks almost like an index, but none of my projects using an index and I've not generated one or the other project.
  • Found the post mentioned above which States that the solution is to change the preferred Format of DHTML, but when I do this I am back empty TOC and look clean but non-functional search!
  • I have now deleted the search the output of one of the projects tab, it is not really necessary, but I need to find a solution for this for my other project.

  Two of my projects are run locally - it is documentation that is distributed on a CD release and the other is CSH, which is loaded on the local server with the software for which it was created.

  Dorothy

  Note to administrators: Sorry, but I posted this in response to a previous post , summary, Index, & Research do not appear in the generated... help -then perhaps it should be removed from this thread to avoid confusion.

  There is an official fix for RoboHelp 9 IE10. But who is unable to solve your problem. If you PM me, I can send you a pre-test to fix IE11 on RH9 to see if it works in your situation.

  The only real solution is probably to update RH11.

  Kind regards

  Willam

• Is the fix for the problems of WebHelp in RoboHelp versions 10 and 11 work when you access by using a Web server?

  I use RoboHelp 10 with the last fix of WebHelp.

  I copied files in the fix to the folder specified in the instructions, regenerated aid and tested my WebHelp on IE 8-11.

  Seen on the spot, the WebHelp output looks very good.

  Help is accessible by users of a web server, so I set up the output newly generated on our web server and tested the output and that's what I found:

  IE 8: Index and glossary are taking 3 or 4 seconds to load, which I guess I very well.

  IE 9: Index and glossary are taking 3-4 second to load. Index entries are too big and use a different font.

  That is to say 10: when you click a topic in the search pane, you get a blank page. When you click an entry in the Index, you get a blank page. After using the Index/Search and then go back to the content page, you get a blank page.

  That is to say 11: entry of Index are cut

  Has anyone else run these question? I can live with the questions about IE 09/08/11, but on IE 10 blank pages are unacceptable. If the fix is not resolved these problems or I do something wrong? Why the fix would work locally but not when accessed from a web server?

  Any info would be much appreciated.

  Thank you

  Mack

  Interesting. When you say the latest patch, which one is?

  (For an overv of all patches, see

  ( https://www.wvanweelden.eu/articles/robohelp-patches-and-updates)

  In IE10, see script errors? And if you press F12 to open the

  Console developer, it shows the errors/warnings?

  Kind regards

  Willam

• Master key Exploit Fix for the RAZR MAXX HD DROID?

  Hey guys,.

  I was wondering have heard of guys all the rumors of Motorola working on a difficulty to exploit for this vulernability Bluebox Security Scanner adorning my DROID RAZR MAXX HD running the Version of the 9.20.1.XT926 system. Verizon.en.US?

  BlueBox Info

  Unpatched / vulnerable to the bug 9695860

  (2nd master key/blog.sina.com.cn bug)

  Ask your provider for the update device

  Since I did some reading, this feat in the android operating system begins to be well known and risk phones eventually be diverted are it seems to have more chances. http://www.PCWorld.com/article/2045087/Symantec-spots-two-Android-apps-using-master-key-vulnerability.html#TK.fb_pc

  Thank you

  Brandon