Range of printers HP Photosmart C-7280 - "error: 0xc18a0101 (ink system no longer works).

Similar Questions

• Printer HP Photosmart Plus Plus shows continuously "ink system failure - 0x19a003e.

  I bought my computer Mac and HP Photosmart together, as it was advised the best printer for Mac.

  Since I get the above error message. Can get 1 week of printing, before the error message appears.

  Had replaced print head, printer sent replacement, another print head has published and now waiting on my 2nd replacement printer.

  I followed the HP guides when I receive messages error, but without success.

  My children have a HP Deskjet which I use without any problems on my Mac?

  Because the printer is not so old and still under warranty, HP replaces it, but I'm sick of not having a printer that works every time and duty wait for replacements...

  Any suggestion from anyone that I could get hurt?

  Or what I can try?

  I get to the stage where I can request a full refund

  Hi Truckiem,

  If I'm not wrong you use: HP Photosmart Plus e-All-in-One Printer (B210a) and you get an error message 'Ink SYSTEM FAILURE' on the screen touch printer.

  You will see the small icon home and U turn the arrow on the touch screen of the printer which is invisible

  Please complete step on touch screen of the printer and, if you are below the following step, make sure that both buttons are invisible.

  Tap the Panel to order 4 times in that order

  Tap the inverted arrow / U turn key lower left (BL)
  Then press the small icon of home top left (TL)
  Tap the inverted arrow / U turn key left lower BL
  Then, once more to touch the opposite arrow / U turn key lower left (BL)

  You will see Menu Support displayed on the touch screen of the printer, and then press OK

  Support touch - Touch OK, use the button to the right and select Menu Reset - Touch OK, use the ScrollBar or the right arrow to select Reset SEMIFULL - the printer turns off automatically.

  Then turn on the printer manually

  Select the language: English

  Country: USA

  If you get the same ink system failure error message, it seems to be a problem with the printhead Assembly.
  Or you can replace the printer of the store where you buy or contact HP Chat support or voice and have it replaced.

• I received a notice of error in error 0xc18a0306 - ink system - what do I do?

  I received a notice of error in error 0xc18a0306 - ink system - what do I do?

  Niels {information}

  20.03.2012

  Thank you for your attention, but I bought a new HP printer.

• CS4 for Mac gives me this message: "license for this product has stopped working. 150:30 error code. Subsequently no longer works. How to operate?

  CS4 for Mac gives me this message: "license for this product has stopped working. 150:30 error code. Subsequently no longer works. How to operate?

  Please see this link for solutions to this message:

  Error "Licensing has stopped working". Mac OS

  Kind regards

  Guinot

• Photosmart C7280 All in One Printer, Error Message - ink system failure

  Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.

  The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?

  Thank you, Cynthia

  This might help you:

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/do-you-have-an-ink-system-failure-0xC-error-message/TD-p/740567

• My HP Photosmart C5180 gives me - error Oxc19a0021 ink system failure

  How can I fix this or do I have to get a new printer?

  Hi KeithFuller,

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Run the fixit from Microsoft Fixit article and if that helps.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2: Try the steps in the following Microsoft article and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also see the following article from HP for the similar question:

   

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03081973&cc=us&DLC=en&LC=en#n164

  Let us know if that helps.

• Printer HP Photosmart C6150 all-in-One. The Error Message ink system failure, error: 0xc18a0001

  I have a HP; hotosmart C6150 all-in-One printer. My magenta ink cartridge ran out of ink. Several days passed and I would like to select print using only black ink cartridge. Now my printer has stopped working. I now get the message ink system failure, error: 0xc18a0001. Just in from a new cartridge HP magenta ink and installed but I keep getting the consignment: ink system failure, error: 0xc18a0001. How can I get my printer working again?

  [Personal information]

  The printer service: to replace. If it's under warranty we achieve for you if you call 1800-474-6836. If you are not in the warranty, we offer a few solutions for you. We always have available agents. Please call anytime.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

• error 0xc19a0035 "ink system failure".

  Hello

  I have a photosmart C7280 and I get an 'ink system failure' error code error message 0xc19a0035.

  I tried the solution suggested by the HP support but the problem is still there.

  0xc19a error message cannot be repaired by the user, C7280 need to be repaired!

• Error: Oxc18a0206 ink system failure?

  I tried everything listed and nothing does.  The printer is barely used.  The error message does not appear on the site... 0206 so I don't know if there is something that needs to be done.

  Hi Daniel,.

  My printer is Photosmart C8180.  I found a fix on FixYa.com who showed, essentially, how to access a hidden menu that would allow the error to be erased.  It worked like a charm.

  Thanks for responding.

• Error: ' Pictures.library - ms no longer works. " This library can be removed safely from your computer. Records that have been added will not suffer' while accessing the image library.

  Title: Picures library no longer works?

  Whenever I try to open my library of images, I get the error message "Pictures.library - ms no longer works." This library can be removed safely from your computer. Records that have been added will not suffer. "It allows me to take pictures with my webcam or anything like that.

  Hi Love_atomic,

  Thanks for choosing Windows 8.
   
  I understand that you receive error message when trying to access the image library. I'll be happy to help you with this problem.
   
  (1) did you do changes on the computer before this problem?
  (2) is the issue limited only with the specific folder?
   
  I suggest you to follow the steps and check if the problem persists.
  (a) open Windows Explorer .
  (b) with the right button on image library , and select Remove.
  (c) click Yes to confirm.
  (d) then right click on libraries in the navigation pane.
  (e) select restore default libraries.
  
  Note: Deleting of a library does not delete the contents of the included folders. However, you need to add or include your folders manually, if necessary.
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Printers HP Photosmart C-7280

  How can I check the number of pages that have been printed?

  Print a report page of self test from the product control panel

  1. Make sure that letter, A4 or legal size paper is loaded in the main tray.

  2. Press the Setup button.

  3. Press the arrow down to select State print and then press OK.

  4. Press the arrow down to select the self-assessment report and press OK.

  5. The product prints a self test report.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• get error code o < c a 19, 0023 on my photosmart b209a more... ink system failure

  I replaced the ink cartridges, verified that they were in the right position.  The printer is off and unplugged and waited about 20 seconds or so and plugged back in and turned on the printer, but the error still persists the code and I am not able to print, copy or scan.

  Anyone else have or had this problem?  Any suggestions would be greatly appreciated.

  Thank you!

  THE

  For any error 0xc or other alphanumeric codes, I would check the document located here.

  I hope this helps.

• HP Photosmart 7525: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my HP Photosmart 7525 is no longer allow me to save the scans to the computer.  The "Save" button is gray and impossible to be clicked.  He'll copy, print and scan documents, I just can no longer save to my computer.

  When I enter the HP utility > settings > scan settings > scan to the computer, the software scans my system, then gives me an error message that says:

  "Scan of the computer can not be activated.

  The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I completely uninstalled the old driver software (which says that HP should run on any Mac OS after 10.6) and reinstalled the latest drivers that it is compatible for the 10.11 and later.  I always get the same answer.  Printer will print, will copy, will scan, but not save to the computer.

  Yes, I already rebooted one device at a time, and Yes, I disconnected and reconnected all devices in separately.

  What can I try next...?

  Hey there.

  EASY SCAN can be installed, use 1.6.0 - works well with SIERRA.

  Kind regards.

• Problem with the printer driver. Get a spooler of saying error massage under system has stopped working.

  I installed the printer driver (HP Officejet pro K5400) to my machine and got the test print as well. but after that when I try to print, I get an error saying Spooler subsystem massage is stopped and was closed. What can I do for this. I tried to reinstall the software and start manually, but all failed.

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.