raw device mapping partition ESXi 5.0 virtual storage can be a snapshot?
ESXI version is 5.0, storage EMC CX-480.
A virtual machine to map a raw partition of the material, the virtual function cannot be cloned or instant?
Thank you!
Hello and welcome to the communities.
See http://kb.vmware.com/kb/1005241 for all the details here.
Tags: VMware
Similar Questions
-
Cannot add Raw Device Mapping as hard drive
Hello
We have 2 Server 2008 Virtual Machines (which are clustered) that make up a Cluster 2 node x. The ESX servers that organize these VMs (ESX Server different on each) are connected to a San. When I place these two VMs, I could add a hard drive "Raw Device Mapping" without problem - he could see data warehouses, I had Setup on the SAN. However when I try to add a hard drive "Raw Device Mapping" on the 2 new virtual machines, the only options I have are:
-Create a new virtual disk
-Use an existing virtual disk
Any ideas why Raw Device Mappings is greyed out?
You add the second node RDM disk by selecting "use an existing virtual disk". The ability to add RAW devices is only available for RAW LUN which has already been mapped to a virtual machine.
When you add the ROW to the first node, a mapping for the RDM vmdk file was created. It's that developed from the second node.
See http://kb.vmware.com/kb/1004617 for more details.
André
-
Can someone explain to me the difference between a regular virtual disk and a virtual raw device mapping? When I create the RDM I am just creating a file pointer to the correct virtual file? If yes why anyone would use virtual raw device instead of just mapping to create a typical virtual drive? I understand the benefits and limitations of the physical RDM I just do not understand the goal of the RDMS virtual.
Well, even if a RDM in virtual mode allows you to use the tricks and VMware snapshots is not always the same thing as VMFS datastore. As stated previously, you can easily remove this ROW and the provision of a physical server without losing a bit of data or to copy.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
We used frames for some time on the storage array that we use for our 8 guests ESXi 5.5
Of course the frames must be enabled at the end
Array of the ports of kernel VM VMWare DVSwitch <>- <>- <>- Core Switch <>switch - Bladecenter
If I SSH in one of our guests and to make a vmkping s 9000 to a port on the Bay, it shows that the frames are working well
We bought another Bay of storage to be used strictly for home video of a surveillance system. I called cameras server that runs as a virtual machine. I added to it a 3 TB of this new array raw device mapping. Can I use the frames between the new table and the virtual machine that uses the RDM? I'm a little unclear on the string "end-to-end" when you use a RDM. The beginning of the part of the string is shown below. Do not know whether or not the RDM traffic crosses the DVSwitch
Bay <>- Core Switch <>- Bladecenter switch
When I SSH into a host that has one of the virtual machines with an attached RDM and use vmkping s 9000 to a port on the table ROW home that doesn't
I have a vlan not routable separated for all traffic storage
Usable for RDM frames? If yes how to do this job?
Yes, that's why I try a ping to 8960. It seems that the frames is enabled but due to the load of package, it is a lower number. Most of the devices and or switching equipment ran to 8960-8972. Here's why.
ICMP/Ping is not encapsulate the 28 bytes ICMP + TCP header. That is why the maximum size of the data part of package 8972 alone. Try the ping to your windows prompt to 8972 and let us know what you get.
I hope this helps.
-
We are implementing vsphere 5. our host machine is HP DL 380 G7 and storage storage IBM DS. We are implementing SAS SAN using HBA cables. There is no iSCSI or fiber module. We want to implement file on vphere server using win Server 2008 R2 SP1. We want to access our data directly from SAN LUN and not vmware data store. Whenever we try to add disks of virtual machines, raw device mapping is gray. If we check in the adapters of storage, we can see available LUNS. I don't add it to the data store. still, it is grayed out. Why? Please help us
Welcome to the community,
Please read http://kb.vmware.com/kb/1017704 to find out if your storage system supports the RDM and whether it's save to disable the ROW filter. Article is not tagged for ESXi 5.0, but I guess this also applies.
André
-
The kernel cache exists for physical Raw Device Mapping?
Hello
I use a SAN storage disk attached to the operating system as "Physical Raw Device Mapping" and mounted at/mnt/disk1.
I was lke take backup of/mnt/disk1 with "SAN Storage FlashCopy function", which copy entire disk in the SAN storage box, bypassing the operating system Linux and VMware kernel.
Summary of the backup script is as follows.
Step1: Synchronize "clear the cache of the Operatiog Linux system
Step 2: umount/mnt/disk1
Step 3: ExecFlashCopy ' run SAN Storage FlashCopy function
Step 4: mount/dev/sde/mnt/disk1
But if the VMware kernel cache for 'Physical Raw Device Mapping Device', "Empty the Cache of VMware" is necessary in step 2.5.
You know VMware cache exists for P "effective Raw Device Mapping Device", and how do I rinse it out.
Thank you.
Your proposal is false. ESXi is not linux and does not cache for VMFS.
ESXi does not cache the IO VM guest operating system receives IO acknowledgement when the disk controller to acknowledge completion of e/s.
ESXi doesn't have any cache for RDM, what is physical or virtual.
---
MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert
-
"Often, localstorage devices do not support VPD page
0x83
and can therefore be used for Raw Device Mappings (RDMS)." The content of the page0x83
is used as a unique identifier for the device. For more information, see creating Raw Device Mapping (RDM) is not supported for local storage (1017530). »Does anyone know if this is even the case for modern storage?
We are a dell shop, wishing to take advantage of the ability to create up to 64 TB RDM.
However, the storage of the host in question will be local SAS only.
Prefer not to have to merge muliple 2 TB VMDK into windows to make a record of 4.5 to.
Then projected on the presentation 1 x 4.5 CT rdm
If you plan to use a SAS controller, you should be able to do this. Your drive will be identified as a device of the naa, and you will be able to add as an RDM to VM - only with ESXi 5 (which can support more than 2 TB LUN).
-
How to migrate VM from\TO Raw Device Mapping (RDM) (data store)
Hi all
I have aske on the migration of VM from\TO Raw Device Mapping (RDM) (data store)?
Thank you all for your support
If you are using vSphere 5, then you can SvMotion the VM attached to a RDM (physical or virtual) with no problems. This means that only RDM mapping file will be moved to another data store without any conversion of changes on the real disc of RDM.
Note: Do not attempt to change the format of disc thin or thick, which would cause the RDM disk converter for virtual disk.
More info here: http://blogs.vmware.com/vsphere/2012/02/migrating-rdms-and-a-question-for-rdm-users.html
If vSphere 4.x is used, hot and then migrate the virtual machine to another store of data will not change the format of the ROW, only mapping file will be moved. This is true for virtual and physical RDM.
However, the cold migrate the virtual machine to another Datatore will change the ROW to virtual disk format.
HTH... Let me know if you have any questions...
-
VM cloning with raw device mapped drive
Hey people... need help.
I have a virtual machine that lives on a 500 GB Lun. The virtual machine has a C: drive of 60 GB (OS) and a 1.5 TB Raw Device Mapped LUN.
My problem is I'm trying to clone this machine to have a backup of it. However when I try to clone a 500 GB or even 1 TB data store it says that I don't have enough space to do. I went and removed the RDM 1.5 TB LUN in cloning options so that it would only clone the C: drive. Still the same message.
Also I noticed that the data of 500 GB store the VM currently living has a hard 1.5 to file which I assume is the Raw Device mapped LUN. Why this creates a file if it is mapped SAN. How she even to create a file of 1.5 TB on a 500 GB data store?
Certainly, this seems to be the reason. Instead of a clone, use vmware converter standalone and treat the VM as a physical server. That should allow you to continue. If nothing else, you can 'remove' the raw device of the VM, clone and then add the raw device to the original. Converter should work well.
vExpert
VMware communities moderator
vmwise.com / @vmwise
-KjB
-
Hola
Quiero crear una nueva virtual infrastructure mi Máquina y estoy lanzando el Assistant "customized" para indicarle "raw device mapping" hacía una lun of the cabina ISCSI as tengo.
Me appears "aprarece" in gray.
¿Esto porque?, put back esx ven el cabina física, asi como el iscsi datastore software iscsi as tengo con openfiler, y tengo MVs running en esos data warehouses.
?¿?¿¿?
Gracias
Hola,
ESO are, primero lo tiene than ver el ESX como una LUn, luego el disco Crystal for the VM as RDM lun of the esa.
Saludos
-
HP EVA4400 + ESX 3.5.0 + discs Windows 2003 Raw Device Mapping
Hi all
I'm testing a configuration to help:
HP EVA 4400
ESX 3.5
Blade HP c-class
Verification of compatibility EVA4400 on-site HP Spock, I found this note in the section Notes General Guest OS (1): "(7) Raw Device Mapping is not supported on Windows 2003 Guest Operating System load."
I would use snapshot EVA (BC) to a Windows 2003 Server (not R2) for backup.
In the VMware HCL, I have not found confirmation of this note.
does anyone know if the note concerned only W2K3 or same W2K3 R2?
"is there anybody out there" who uses this configuration? EVA4400 is: + W2K3 in ESX 3.5 + RDM + instant. Any problem?
Thank you very much
Max
The restriction was lifted (don't know why he never existed - perhaps no trial):
Release notes for HP StorageWorks 4400 Enterprise Virtual Array (XCS 09006000)
Reference number: 5697-7997, second edition: January 2009
* Configuration of VMware for the raw device mapping details
RAW Device Mapping only is not supported with Windows 2003 Machine virtual guest operating system and versions prior to version ESX 3.5.0.
-
VM 2 not clustered for a raw device mapping
Hi, I'm new in the world of VMWare. I watch discussions related to this issue, but the only one I met was on "more than a vm in the group for access to the raw device mapping drive". In this thread, we had to change the vmfs to a shared access mode.
My question is:
I want to have 2 vm with the same raw disk bound, but only one of them is going to power. This virtual machine (it is power on) will work with the raw disk (data base), while the other virtual machine is turned off. In the case of the first vm failed, I disabled this virtual machine and turn on the virtual machine second. This second vm start working with the database in the raw disk. How can I do this? Is necessary how to access shared for this problem?
I hope you understand me with my poor English.
Thank you very much.
What you want to do is simple, you do not need to use shared mode. Probably the best way to achieve your goal is to build your first virtual machine and get it all set up and then remove (do not remove) the RDM and the clone to the virtual machine. This will result in two virtual machines with the same host name and the same SID (assuming Windows here) - two IDENTICAL systems. Power on each virtual machine in turn (only lit at the time) and add the ROW as an existing drive. As long as one virtual machine is running at the same time, there will be no problem.
HTH,
KLC
Ken Cline
Technical Director, virtualization
TVAR Solutions, a company of the Wells Landers group
VMware communities user moderator
-
Best practices - virtual disk of Raw device mapping vs
Hello
A small question about the configuration. What would be described as the best practice to configure a comment server that required a large amount of disk space? What is the preferred option:
1 - create a virtual machine with a mapping of raw device to the LUN (on a san)
or
2 - create a virtual machine with another large virtual disk that is in a data store on the LUN (on a san)
Thank you
Dave
Kader you are limited with 2 TB in any case (except using the iSCSI software from within the guest operating system), the only arguments are:
(1) use RDM if it is possible that you will connect to this physical machine LUN. Or you already have the unit number logic of a physical machine as a large file server.
(2) VMFS use in all other situations - VMDK give flexibility, you can migrate the virtual machine where you want.
---
MCSA, MCTS, VCP, VMware vExpert 2009
-
RDM (Raw Device mapping) physical or virtual?
Hello:
I have VM and will add a hard drive. RDM will be, but I was wondering what "Compatibility Mode" choose "physical or virtual?
It's my production Oracle machine and this new drive will contains about 500 GB of DATA...
I think it would be nice to use the 'virtual' mode, to make snapshots, but I'm worrying that, for this one big disk, it will take a lot of time and a lot of space... There are other arguments that I should consider?
Thank you very much.
Best regards
olegarr
olegarr wrote:
Surya,
Thank you very much for your help.
What is any other reason to use Virtual Mode, if I used instant no?
Thank you
olegarr
"design of the SAN and Deployment Guide system.
Virtual mode for a mapping specifies full virtualization of the mapped device. He
appears to the operating system exactly the same as a virtual disk in a file
VMFS volume. The actual physical features are hidden. Virtual mode
customers who use raw disks of the benefits of VMFS, such as advanced files
locking for snapshots to streamline development and data protection processes.
Virtual mode is also more portable across storage than the physical hardware,
with the same behavior as a virtual disk file.
Physical mode for a device mapping gross specifies the SCSI virtualization minimum of la
device mapped, allowing greater flexibility for SAN management software. In
physical, VMkernel mode all SCSI commands to the device, with a
exception: the REPORT LUNS command is virtualized, so that VMkernel can isolate the
volume to the virtual machine owner. Otherwise, all the physical characteristics of the
underlying hardware are exposed. Physical mode is useful for running the SAN management
agents or other software SCSI target on the virtual machine. Mode of physics
also virtual and physical memory allows for cost-effective high availability clustering.
-
Hello forum,.
I have a virtual machine that got a RDM in physical Compatibility Mode, so I can't create snapshots of this disc.
Is there a way to convert this ROW to a virtual Compatibility Mode to allow the creation of the snapshot?
The client must create a snapshot tomorrow in order to update the database. In case of failure it would be easy to write the snapshot again.
Hope you understand my problem.
concerning
Dennis
Assuming that the RDM is attached to a single virtual computer, see http://kb.vmware.com/kb/1006599
Conversely, virtual and physical memory ROW, make sure you have deleted (Clerk) the snapshot before you remove the disk devices to the virtual machine, otherwise you will lose changed data!
André
Maybe you are looking for
-
iOS 10 - How do I get the clock to display the seconds?
Recently updated my iPhone iOS 10.0.1 6s. After a power failure, I was re-creation of different clocks and discovered that the "Clock" Apple app displays more seconds in the "WorldClock" pane In addition, I can't change for the clock faces 'analog-st
-
When I open a new empty email, NO send an e-mail or the Send option is visible; There is a Contacts tab, where I can access ALL the addresses to which email regularly. How to restore these tabs in all new empty emails that I opened? I just learned ho
-
Equium P200-11R: two different processors in my device manager
HelloI have an Equium P200-11R.When I look at the system, the processor is shown as «Intel Pentium Dual CPU T2330 @ 1.60 GHz»However, in the Device Manager under processors I find; "Intel Core Duo CPU T7300 @ 2.00 GHz", then "Intel Pentium Dual CPU T
-
Can Satellite Pro U400-13I - I reinstall the CD/DVD creation software?
Hello Can someone help me with my problem.I have a Satellite Pro U400-13I and use XP he. As I experienced some problems with the creation of CD, I decided to uninstall and reinstall.However, I am unable to find the program to install only the softwar
-
DVD region of Mat * a UJ - 820 s!
HelloCan someone help me solve my problem on my DVD-ROM DVD region? I tried several free software DVD region, but none of them worked. Therefore, I must only watch DVDs with region 2. The strange thing is that these software worked on the laptop from