rcpaftownload_ad_1413_cp1.exe is the secure file

Similar Questions

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

  I have a subscription to adobe for the cc 5.5 and rebuilt my computer to the low load the .exe and the second file. I have windows and after clicking on the .exe has nothing happened?

  If you have downloaded from here: Download CS5.5 products, please see the instructions to extract the files and install your product.

  Alternatively, you can download it here:

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  Guinot

• 18368834.exe is the Security Tool file infect my computer.

  Security Tool Virus has disappeared... but a regedit search showed me that the number associated with the '18368834' virus RASAP132 under HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Tracing\18368834_RASAP132 is some sort of Trojan resident?  It can be removed without causing any damage?  The reason why I ask is the Security Tool virus tried again to infect my computer and I would like to know if there is something left behind. I ran malwarebytes again and it found nothing.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to
  detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
  better to be too full now than to pay the price much later. Check with these extreme
  Overkill point and then run the cleaning only when you are sure that the system is clean.

  Security tool (and SecurityTool) is a fake antivirus, a scam to force you to pay for it while it
  There is no advantage at all.

  Remove SecurityTool and Security Tool (uninstall Guide)<-- read="">
  http://www.bleepingcomputer.com/virus-removal/remove-security-tool

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  It's here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  -----------------------------

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all the security measures you
  took (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro
  --------------------------------------------

  Here are some free scanners online help if needed:

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why not be able to run MRT.exe using the batch file?

  When I run the following script using the batch file, MRT cannot be run.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  off @echo
  C:\WINDOWS\system32\Mrt.exe/q/f

  Hello

  ·         The computer is connected to a domain network?

  ·         What is the error you get when trying to execute the batch file?

  If the computer is connected to a domain network, I suggest you to report this issue in Windows XP IT Pro Forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

  Thank you.

• How to install the vcdrom.exe and the sys file.

  I installed vcdrom.exe and copied vcdrom.sys to windows/system32/drivers as indicated, but when I try to select vcdrom.sys list drivers install this is not yet visible. but when I go to the site ouside the program I think it's no problem, I tried to run the program as administrator, I tried to adjust the file sys in total control, and it makes no difference. What should I do?

  There is actually an updated version that is supposed to work with Win7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=38780

  Right click on the file vcdcontrolTool.exe and choose run as administrator removes the "could not open SCM: access denied" message, but VCdRom.sys is still not visible in % windir%\system32.

  Apparently, it is simply not compatible with x 64 versions... even if you run it high and try to load the copy of the driver on the left file in the subdirectory to decompress (which is no problem), the message 'the driver has been blocked from loading.' results. Maybe some MVP re / writing he forgotten kernel mode code signing or will not pay the annual dues ($ 400?) to MS for the signature of x 64 drivers.

• WinDbg.exe requires the .natvis file

  I'm reading the .dmp files that I get from program crashes and everywhere where I look online told me that the tool of go - to for this task is windbg. I have windbg installed but now I find to complain that it cannot find all the files ".natvis" when I try to read my .dmp files.

  Can someone please tell me where I can get the .natvis file (s) I need?

  While the analysis of debugger Windows isn't rocket science, it has a very steep learning curve.  He usually takes to rebuild 500 DMP until it starts to make any sense and participates a lot & lots of reading.

  I'd be happy to discuss by email if you are interested.  If so, use the email address on my profile page.

• Whenever I try to download something from the internet, I get a warning that it has detected a problem with the security file. She has been blocked because it doesn't have a valid digital signature that verifies the publication server.

  I tried to download updates for a memory creative program that is already installed on my computer, among other things.  I recently tried to download music on Amazon, but first had to download the MP3 downloader from here.  It won't let me.

  Hi Carich,

  Welcome.

  Has) unregister Windows Installer, and then reregister Windows Installer. To do this, follow these steps:
   
  1. in the menu 'Start', click on ' execute:.»
   
  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
   
  3. in the menu 'Start', click 'run '.
   
  4. in the "Open" box, type "msiexec/regserver" and then press ENTER
  B) the Windows Installer service can be disabled on the computer.
   
  1. click on "Start"-> "Run", type "services.msc" and press the Enter"" key.
   
  2. double-click on the service named "Windows Installer". If it is not started, start the service.
   
  3. check the value in the "Startup type:" field. If it is currently set to "Disabled", it is the

  problem. Change it by selecting 'Manual' in the drop-down list box.
  C) install the latest version of Windows install from the link: http://www.microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to install my old standard CS5 on my new windows 10. I don't see an .exe on the disk file when I open it.

  What is - c

  Hello

  CS5 is an older version, so Adobe has not tested the application on the latest operating system which is WIN 10.

  How always, you can download and try to install the application from the link below:

  Download the CS5 products

  Let us know if that helps.

  Kind regards

  Bani

• Essbase server does not start: fatal error: security file created in the mode of Fusion, but the current environment isn't in merger mode.

  Hello

  We are unable to start the Essbase server after trying to configure SSO between OBIEE and Essbase.

  Here are the details of the journal:

  ----------------------------------------------------------

  14/10/28 10:35:45 start

  ------------------------------------------------------

  Info: Essbase reduced the number of soft file descriptors because the 32K limit has been exceeded. Exceeding the limit can greatly increase the loading time of application.

  Environment variable [HYPERION_LOGHOME] is - it allows to define the location of the log file.

  The log location is [/ u00/app/mw_home/forums/instance1/diagnosis/newspapers/Essbase/essbaseserver1/essbase].

  [Mar 28 10:35:45 Oct 2014] Local/ESSBASE0 / / / 47677451854848/Info (1051283)

  Recovery of license information, please wait...

  [Mar 28 10:35:45 Oct 2014] Local/ESSBASE0 / / / 47677451854848/Info (1051286)

  The license retrieved information.

  The user 65535 Essbase user 65535 planning system

  [Mar 28 10:35:45 Oct 2014] Local/ESSBASE0 / / / 47677451854848/Info (1311019)

  Classpath lors de l'initialisation de la JVM : [ : / u00/app/mw_home/Oracle_BI1/common/jlib/11.1.2.0/dummy.jar:/u00/app/mw_home/wlserver_10.3/server/lib/weblogic.jar:/u00/app/mw_home/Oracle_BI1/... /oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/u00/app/mw_home/wlserver_10.3/server/lib/wls_api.jar:/u00/app/mw_home/Oracle_BI1/common/jlib/11.1.2.0/epm_j2se.jar:/u00/app/mw_home/Oracle_BI1/products/Essbase/EssbaseServer/java/essbase.jar:/u00/app/mw_home/Oracle_BI1/products/Essbase/EssbaseServer/java/ essbaseRegistry.jar]

  [Mar 28 10:36:28 Oct 2014] Local/ESSBASE0 / / / 47677451854848/Info (1051199)

  Single Sign-On initialization succeeded!

  [Mar 28 10:36:28 Oct 2014] Local/ESSBASE0 / / / 47677451854848/Info (1051627)

  Info: Essbase reduced the number of soft file descriptors because the 32K limit has been exceeded. Exceeding the limit can greatly increase the loading time of application.

  Fatal error: the security file was created in blend mode, but the current environment is not blending mode... Restart Essbase using the last backup file, or set the ENABLESWITCHTOBACKUPFILE config to allow Essbase automatically uses a backup security file

  We have updated the essbase.cfg and define the TRUE ENABLESWITCHTOBACKUPFILE but that didn't work.

  Also, we have renamed the file essbase.sec in essbase_bak.sec and restarted the service. still no luck.

  Essbase Server is now running

  Followed the instructions in the document below:

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=322765872961140&ID=1676072.1&DisplayIndex=1&_afrWindowMode=0&_adf.CTRL-State=f6suct4ab_302#cause

• path of the image file that links do not correctly in the executable file

  I have a jpeg file in a project that I'm building which is not loading when run as an executable file.  The executable seems to be looking in the same directory that the image file was originally instead of the support folder where the image is deployed.  On another machine, the exe will look for the image in the directory, that were found on my machine.  When I drag the image file of the project on the block diagram Explorer, it creates a constant path of file indicates where the file is located on my machine.  This does not seem to update when I build the exe.  The image file is included in the source files.  Any help is appreciated!

  A constant path is... Yes indeed constant! It's not automatically change whenever someone might move the file too, whatever his imagination made her do. He does not maintain a link to the actual file it could use later to detect that the file has been moved elsewhere. In fact Windows has quite such a mechanism.

  So if you want to access an external file to your executable application to first do a correct path when running. My approach is to put in a directory from a VI file that I put in my application. Then in this VI use the way of getting current VI, band name the VI of it and add the location relative to the other file to it.

  If you do something like this:

  The project directory

  Directory of the utility

  My Location.vi

  Data directory

  MyResource.jpg

  in system development, then:

  The application directory

  MyApplication.exe

  Data directory

  MyResource.jpg

  in the application of the construction.

  With this provision, it doesn't matter even if you use the old format of executable LabVIEW 8.x or the new default format since LabVIEW 2009.

  My Location.vi is just a VI that takes a relative path in the entry (in this case "... / directory/MyResource.jpg data" called the "Current path to VI" node, use 'Band path' to remove the name of VI, then build to add this entry path, and this is!.)

• How to create a password for the pdf file

  The Adore Acrobat XI, how to create a password for the file? Aid says going to the Tools Menu and clicking on the Protection tab - but there is no option. In the security file - properties - screen, it shows the security details but doesn't allow for no change.

  I think you can be mixing two different products: (free) Adobe Reader and Acrobat ($$).

• Security file export of EAS

  Hello
  
  When I export a rom EAs file security. where - he be saved? Is this same file as the security file that we extract the HFM workspace?

  An export of EAS security wrote:

  Oracle\Middleware\user_projects\epmsystem2\EssbaseServer\essbaseserver1\bin

  I hope this helps.

  Tim Young

• Find text in secure file gives bad result

  I'm usung Adobe Reader 10.1.4 with Windows 7 32 bit.  When I try to find the text, I get a wrong result if the PDF is secured.  I get the correct result in a file that is not guaranteed.  The same search for the secure file works on another PC also running Adobe Reader 10 and Windows 7.  I uninstalled Adobe Reader and re-installed.  Any ideas on what could cause this?

  After much research of all options of security in programs I thought likely to affect Adobe Reader, I reached nothing a lot of expletives later, I found the solution

  Open Adobe Reader > edit > Preferences > search, click on "empty Cache Contents.

  Everything works again!

• Import of security files

  Hi all
  
  I get this error when you try to load the security file...
  
  Could not find the JDBC_CATALOG key for application: admin
  Kill Mar 30 11:18:38 SAST 2010: error: import safety failure - the administrator of the application is not valid.
  com.hyperion.planning.InvalidApplicationException: the admin application is not valid.
  at com.hyperion.planning.HspJSHomeImpl.validateAppAndClusterName (unknown Source)
  at com.hyperion.planning.HspJSHomeImpl.createHspJS (unknown Source)
  at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp (unknown Source)
  at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
  at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
  at com.hyperion.planning.HspImportSecurityCmd.importSecurity (unknown Source)
  at com.hyperion.planning.HspImportSecurityCmd.main (unknown Source)
  Kill Mar 30 11:18:38 SAST 2010: logout of the application...
  Kill Mar 30 11:18:38 SAST 2010: disconnected from the application.
  Kill Mar 30 11:18:38 SAST 2010: import safety failed.
  
  Server is running unix. The application runs in essbase. by using the same user admin I use to essbase.
  
  What is a JDBC_CATALOG?
  
  TX

  The application certainly called admin or is that the account?

  See you soon

  John
  http://John-Goodwin.blogspot.com/