RDP fail to redirect printers on the windows machine 7

Similar Questions

• Not able to hold on to the windows machine Windows 2003 Server 7

  Not able to hold on to the windows machine Windows 2003 Server 7

  I have a small network of windows 2003 server standard and the nodes I have Windows XP and windows7 professional I am able to connet domain controller for windows xp and I am not able to connet by windows7 can u suggest me .or reaseon I am able to ping with both

  There is NO link here for you regarding the pricing of Windows 7, or Windows Server 2003

  TRANSFER your question in the correct Forums.

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Try the repost in the Windows Server community at the above address.

  Mick Murphy - Microsoft partner

• Windows 7 x 64 fails to download updates of the window

  My daughter just got back from the University and its PC (Windows 7) informed me that there are 16 important to install updates. However, on starting the download of the Windows Update dialog box "blocks just" showing "download 16 updates (0 total kb, 0% complete)" while the download bar continues to see the bar moving the green from the left. I now tried several times over the last few days and still can not move forward.

  Interestingly, he did download & 2 updates installed first thing this morning (KB2296011 & KB2158563) that were 18 updates I tried to download and install yesterday.

  Thanks in advance for any help that can be offered.

  Chris

  How will I know if my computer is up to date?
       http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

• 'Fail forward' for Ports on the virtual machine

  We have a customer who will be centralizing the unit with about 250 users at remote sites (4 Sites, 1000 Subscribers, they have currently a unit break at each site and want to centralize). Each site will have its own cluster of CM. I'm thinking about what I could do failure network SCOPE. Of course, each site will be fine IPT wise because they have their own cluster of CM, but VM will be declining. I think I watered but if there was a way to "transmit failure" or something on the VM ports on the PSTN to maintain the work of the virtual machine. (Of course carrier must support ISDB).

  Someone at - it works in this or thought about it?

  Andrew Dignan... If the carrier supports RDINS of course

  The connectivity of voice mail for Cisco CallManager chapter of the Cisco CallManager System Guide:

  "Inter-classes Interfaces A Cisco CallManager in a cluster can provide access to a voice mail system in another cluster, if the administrator provides the voicemail number on the trunk driver inter-classes. Voicemail systems can leave messages and sets the flags of message waiting for devices other clusters if clusters are connected by trunks QSIG. »

  This applies to any system of virtual machine. With the unit, you have of additional capacity to save ports across multiple clusters so to provide MWI without ICTS as QSIG.

  Hope this helps,

  Eric

• Autodesk DWF Writer 3.1 is not installing from the windows machine 7. Error returned is "failed reading registry value DriverCachePath".

  Product name: Autodesk DWF Writer 3.1

  OS: Windows 7

  Error: failure reading registry value DriverCachePath

  Error is not occurring in all machines of widows 7

  Thanks in advance.

  Please help to install

  Hello

  The computer is on a domain?

  Will correct the problems with programs that cannot be installed or uninstalled method 1)

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  If the problem persists, try to install the clean boot

  Method 2) how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you perform a clean boot, you temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior. Don't forget to reset the computer in Normal mode.

  It may be useful

• printer does not work in the windows machine 8

  my printer does not work in this new machine of windows 8. tried everything to fix the problem. It won't send email documents to the printer either. just doesn't get it. Ive had kodak install drivers, and just, it will not work on this computer. It was fine on windows vista. the printer is set by default on this computer, then why it wont work on this one. not happy with windows 8 at all. wish I never bought it

  Hello

  As Kodak OEM is responsible for the good operation of the printer and their
  drivers provided. Check their documentation online, with the support of Kodak, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Kodak - printers
  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Kodak - Support and downloads
  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL3NyYy9nb3N1cHBvcnQvc2VsZWN0ZWQvdHJ1ZS9jaGFuZ2UvdHJ1ZS9vcmlnX2ludGYva29kYWtfYjJjX2Vu/change_country/true

  ====================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• How Linux USB Hard Disk boot of the Windows Machine?

  * Dears, *.

  I have windows XP Machine...
  My laptop is Qosmio F20 155
  I need to start Linux USB hard drive.
  I tried to enter the configuration menu to organize the start perority to the FIRST hard drive USB, but I can not enter in menu setup

  Please, help me ASAP

  * Many thanks & regards, *.

  Post edited by: eng_mohammedmostafa

  Hello

  As far as I know that booting from USB stick or HARD drive is not supported by the BIOS for this series of mobile.
  As far as I know you can boot from the HARD, ODD, LAN and USB FDD (floppy) disk, but I think that you can not boot from USB HDD.

  See you soon

• The update of Skype is not on the Windows Store for me

  I have Skype for Windows Desktop. However, a few months ago he began to say "Time to download the new update" with a button redirect me to the windows store. However... the windows store had no update. At this point, I used the online client. However, the online customer has been recently removed. I can not download Skype for windows, do I have to use the desktop or online. What should I do to get the new update of Skype to show up in the windows store?

  Skype on Windows Store has been disabled, on 7 July, last year.

  https://support.Skype.com/en/FAQ/FA34565/upgrade-now-to-Skype-for-Windows-desktop

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Windows Installer is not be accessible. It is not installed correctly.

  I have Vista Home Premium, 32-bit operating system.  Failed to install.  Have the windows could not be accessed error message. Even paid someone for a remote and he couldn't fix it.  A system restore.  Installer worked for a short period of time and then got the same error message.  I have tried almost everything on the proposed forum.  Still does not work.  Could there be a software conflict?

  
  

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• RDP connection client for Cisco VPN Windows machine

  Hello

  I am a linux user and because the cisco client is not available for Linux (Kernel 2.6.34 >) my company has installed a machine VMWare Windows7 so I can install the VPN client of our client of my company. For sure, I don't want to use the Windows machine via the vmware client, so I use through a RDP connection.

  Unfortunately, if I set up the VPN, the RDP connection degrades. This seems to be quite common for VPN clients however, it seems to be configurable somehow. I already tried to change the routing table, but it doesn't seem to be a problem with routing. The customer puts a firewall or something like that?

  Thank you

  Kim Neunert

  It really depends on how the VPN server is configured? If it's the tunnel to the VPN server, or it has split the configured tunnel.

  If it is indeed tunnel all to the VPN server, it will certainly break the local RDP session.

• File placed in Mac server with read/write access to all the world, but when a Windows machine changes and saves the file, it becomes read-only

  Original title: Excel file permissions

  At my work, all except 2 computers are Macs. I'm one of the only Windows machines. I created an Excel file which I want everyone at the office to access and modify. We have put on the Mac server and changed the permissions for everyone to read and write. I also had that done on the Windows machine before placing it on the server. However, people on Mac machines can open, change it and save it without problem. But if one of the machines Windows opens, modifies and saves, it restores the Mac machines to read-only. Anyone know how to fix this?

  Hi amber,

  Please contact the Microsoft Community.

  I would have you post here for further assistance.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Let us know if you have any other problem with Windows in the future.

• Installation of Hyperion 11.1.2.4 for all foundation and weblogic admin server on Linux and HFM on the window

  Hello

  We have planned the implementation of several node, where a server under Linux OS has foundation, OSH and weblogic domain.  Server B on window has HFM.  We know now that we can have single domain web-logic since HFM has no binary for Linux (and we must at least HFM web - app to install if we want common weblogic domain).  In this case, what is the common practice.  Should we local domain web-logic on the server HFM window?  Is there a better way?

  Thank you.

  My understanding is that you need one,

  #Separate Weblogic domain for the components installed on the Linux box (Foundation)

  #Separate Weblogic domain for the HFM components installed on the Windows machine

  Such as Weblogic in Linux can't talk to the components installed on the Windows machine.

  Kind regards

  Deker P.

• Remove the path of the windows 2008 64-bit Oracle client

  Hi all

  I had to unstall the product of Hyperion epm after I found the installation have to done on another language, that has the oracle for 32 and 64-bit client. But when I reinstall it complains the way at oracle.

  Here is the error I get from the newspaper.

  [FATAL] [INS-32053] The original name of the Oracle Home specified directory already exists.

  CAUSE: The name of the base directory Oracle Home specified on the command line matches an existing Oracle Home directory name in the central inventory.

  ACTION: Choose a different name for the Oracle Home Directory. Renoncer give to this setup session, and then try again.

  I made sure that the file system is completely is deleted after the unstallation except these client files which I deleted manually.

  It seems that the unnstalation does not correctly for clients and old path is somewhere still exists. I deleted the path in the environment variable path list customer and tried again but no luck.

  Can someone help me identify the places where I should look to remove Oracle's previous home.

  Thank you

  The register, perhaps, or the inventory (which is in c:\program files\oracle or c:\program files (x 86) \oracle - I don't remember right now).

  However, if you search for 'clean up the windows machine' Support of Oracle, you can find an article that shows you how to remove all traces of the Oracle software from your Windows computer.

• Network card not working is not on any of the windows on an ESX 3.5 Server images

  We have an ESX Server. No problem with ESX Server network. Can access the same using vmware vi client/vm sphere v ware of my windows machine

  I have a lot of windows on the ESX Server. When that I start one of the windows on the esx Server images, the network card in the windows machine is not coming.

  When I right click on my network-> properties, I am not able to see the new Icon.Only LAN network icon is displayed.

  Any thoughts on where I could go wrong.

  Thank you

  You have network cards virtual of your connected VMs for port groups virtual machine on virtual switches with network interface cards physical? If you you use VLAN and if you is your ocnfigured physical switch correctly?

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful