RDP connection client for Cisco VPN Windows machine
Hello
I am a linux user and because the cisco client is not available for Linux (Kernel 2.6.34 >) my company has installed a machine VMWare Windows7 so I can install the VPN client of our client of my company. For sure, I don't want to use the Windows machine via the vmware client, so I use through a RDP connection.
Unfortunately, if I set up the VPN, the RDP connection degrades. This seems to be quite common for VPN clients however, it seems to be configurable somehow. I already tried to change the routing table, but it doesn't seem to be a problem with routing. The customer puts a firewall or something like that?
Thank you
Kim Neunert
It really depends on how the VPN server is configured? If it's the tunnel to the VPN server, or it has split the configured tunnel.
If it is indeed tunnel all to the VPN server, it will certainly break the local RDP session.
Tags: Cisco Security
Similar Questions
-
Unable to connect to the Cisco VPN you use native client: El Capitan
I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."
When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:
* connect using the old work VPN connection: without success
Config: Hand [server address, account name],
AUTH settings [shared secret, the Group name].
Advanced [mode to use the passive FTP = TRUE]
errors:
"authd [124]: copy_rights: _server_authorize failed.
"raccoon [2580]: could not send message vpn_control: Broken pipe"
...
* Add new VPN connection using L2TP over IPSec: without success
Config: Hand [server address, account name],
Authentication settings [user authentication: password, identification of the Machine: Shared Secret].
Advanced [send all traffic on the VPN = TRUE]
errsors:
"pppd [2616]: password not found in the system keychain.
"authd [124]: copy_rights: _server_authorize failed.
...
* Add new connection using Cisco via IPSec VPN: without success
Main config: [server address, account name].
AUTH settings [shared secret, the Group name].
Advanced [mode to use the passive FTP = TRUE]
errors:
"authd [124]: copy_rights: _server_authorize failed.
"raccoon [2580]: could not send message vpn_control: Broken pipe"
VPN server is high and does not work and accepts connections, this problem is entirely on the client side.
I. Journal of Console app existing/Legacy VPN connection:
26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics
26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]
26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status
26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.
26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.
26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.
26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 339 [2580]: connection.
26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0
26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2
26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.
26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 405 [2580]: connection.
26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0
26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0
26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).
26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).
26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.
26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.
26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.
[26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting
26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).
26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe
26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe
[26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no
26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
$VPN_SERVER_IP
II. new VPN connection using L2TP over IPSec Console app log:
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856
26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856
26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13
26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent
26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}
26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}
26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]
26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status
26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory
26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]
26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller
26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller
26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.
26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.
26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain
26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!
26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!
26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501
26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback
26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback
26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed
26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify
III. New connection of Cisco VPN through IPSec Console app log:
26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f
26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f
[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]
[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status
26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.
26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed
26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.
26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.
26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 296 [2576]: connection.
26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0
26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2
26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.
26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 374 raccoon [2576]: connection.
26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0
26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0
26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).
26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).
26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.
26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.
26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.
[26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting
26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).
26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe
26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe
[26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no
26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP
It seems that I solved the problem, but I'm not sure it helped.
After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.
-
Configuration of Cisco for Cisco VPN Client ASA 5505
Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.
When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.
There step by step guides to create the connection profile file to distribute to customers?
Hello
The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.
You will need to set the same in the client, so that they can negotiate and connect.
Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name
Host will be the external ip address of the ASA.
Group options:
name - same tunnel as defined on the ASA group
Password - pre-shared as on ASA.Confirm password - same pre-shared key.
Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.
You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.
Kind regards
Anisha
-
Remote Desktop Connection Client for Macintosh - Windows key?
When you use Remote Desktop Connection Client for Macintosh to connect to a Windows 7 PC, how I ' press on ' the Windows key on the remote computer? I can't find a sequence of emulation in the help text that is assigned to the Windows key.
I'm not sure, it would be the same as that indicated in the following Apple Boot Camp support, but it can be: http://support.apple.com/kb/HT1220
-
Unable to connect via the Cisco VPN Client
Hello
I have configured remote access VPN to ASA and tries to connect via the Cisco VPN Client 5.0
I am not able to connect and watch the journal on the SAA
ASA-3-713902: Group = xxxxx, IP = x.x.x.x, withdrawal homologous peer table is placed, no match!
ASA-4-713903: Group = xxxxx, IP x.x.x.x, error: impossible to rmeove PeerTblEntry
ASA does not support the K9 i.e. VPN - DES is enabled and VPN-3DES-AES is disabled.
What could be the reason.
Concerning
Hi, I had this same problem, here is the solution:
When you perform a debug crypto isakmp 255, so you see that the cisco vpn client does not support SHA +, you must use MD5 + AN or sha with 3DES/AES.
Be careful, this debugging is very talkative, but that's the only way I found to get ITS proposal on debugging.
Well, change your strategy using MD5 isakmp / OF would do the trick.
-
Unable to connect to the Cisco VPN using the branch line
Hello
We use Cisco VPN Client 5.0.07.0290 to connect to our servers. We have a Sonicwall NSA2400 FW and we have 2 ISPS. We have configured load balancing on firewalls in mode 'Spill-Over '.
So whenever the 1st line is on full charge, it will automatically moves users on the 2nd line.
The problem that we face here is the users who get 1st line ISP, they can easily connect to the client VPN Cisco IP, but the users who receive the IP of the 2nd line of the ISP, they are not able to connect to the Cisco VPN Client. It's really annoying because everyone should be able to connect.
It will be really great if someone can help me as well.
Thank you
PS: If Exchange us the line of Sonicwall haapens scenario of Vice versa as mentioned above.
Hello Sam,.
Correct me if I help you,.
In your network that is inside the firewall, you are trying to connect to Cisco VPn client resides outside your network/Public network.
If the above is the question.
Please check the routes and roads of sonicwall priority.
example:
Isps1: the value of the metric as 1 for traffic destined for cisco VPn IP of the gateway and specify to leave traffic isps1 interface
ISP2: set the metric 1 once again for the traffic to cisco VPn IP of the gateway and specify to leave traffic ISP2 interface
interface metric 1 source destination
Kindly, please note the useful messages and.
Thank you
Srikanth
-
Problems to connect via the Cisco VPN client IPSec of for RV180W small business router
Hello
I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for
> [34360] has no config mode. I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.
Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.
Router log file (I changed the IP
addresses > respectively as well as references to MAC addresses) Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart
> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT> [44074] because it is admitted only after the phase 1.
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [4500]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for> [44074]
Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for> [4500] - > [44074] with spi = >.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP>
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of> [44074]
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no config mode
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for> [44074] has no mode config
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP>
Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for> [4500] - > [44074] with spi = > The router configuration
IKE policy
VPN strategy
Client configuration
Hôte : < router="" ip=""> >
Authentication group name: remote.com
Password authentication of the Group: mysecretpassword
Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)
Username: myusername
Password: mypassword
Please contact Cisco.
Correct, the RV180 is not compatible with the Cisco VPN Client. The Iphone uses the Cisco VPN Client.
You can use the PPTP on the RV180 server to connect a PPTP Client.
In addition, it RV180 will allow an IPsec connection to third-party customers 3. Greenbow and Shrew Soft are 2 commonly used clients.
-
How to connect to the CISCO VPN server without using the CISCO VPN client (from dialog Windows VPN)
Hello world
I have a cisco router 2800 installed in our companyand I have it configured as a VPN server for professional help (cisco configuration)with the ease of the VPN Server WizardCan I connect to this server using windows XP or 7 dialog VPN?Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers community. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threadsI hope this helps!
-
Unable to connect using the Cisco VPN client
Hi all. I recently configured a 5510 ASA to allow remote access using the Cisco VPN client. The problem is that everything works fine when I connect using a modem classic or on a computer with a public address that I use for testing purposes, but whenever I try to connect with on an ADSL line, I can't access to the resources. I have connection and after that nothing, I can not achieve anything.
I enclose the relevant configuration information in the attachment. Any help is welcome.
Depending on the version, add...
ISAKMP nat-traversal
or
ISAKMP nat-traversal crypto
Should be all you need.
-
Internet has stopped working when it is connected to the Cisco VPN
Hello
I configured IPSec (Ikev1) WHAT VPN remote access in ASA 5520, VPN connects correctly and I am able to access all internal resources but Internet does not work when connected to the VPN. I studied on it and found the problem with the default gateway, I'm ddefault duringVPN gateway connection. I'm surprised in ASA, there is no default gateway configured for the pool of IP VPN remote and remote clients then how can get a default gateway.
I describe my problem below using image in shootout gave it.
Thanks in advanve.
Hi Mukesh,
Until you specify command below according to your group policy, you will get the default gateway assigned by ASA to the user of your vpn. Please update your config strategy & group of tunnel
Group XYZ policy attributes
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunneltunnel of splitting allowed access list standard 172.16.1.0 255.255.255.0
For anyconnect with split tunnel use below URL help
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml
ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702999.shtml
HTH
Concerning
Santhosh silou -
Connection of customer Cisco VPN to work
I recently picked up 1 billion domestic 7800N router to replace my old netgear which fell signal much.
I seem to have some access to my work via VPN client network problem. I can't connect the Cisco VPN client to the network ok but I have no access to the email server and exchange. I tested the parameters of the client on my old Netgear and it works fine. That tells me that the management of the router...
I don't have any packet filtering on and I put in place profile of my fixed ip of internal House on the ip of the work to allow any protocol and any port.
I also sent port 500, 4500 and internal 10000UDP to my ip address.
I'm a noob when it comes to networking and I'm a little lost. I feel this topic falls in the middle ground between the client and the seup router if I appreciate draw my having a definitive answer. I can post a copy of the customer logs if this is useful.
I hope someone can point me in the right direction...
Thank you
Neil
Hello
It looks like your home network is using the same ip as your work network range. I recommend you to choose a new range for your home network that is not identified in the routing table updates in your newspapers.
For example: 10.255.255.0/24
Best regards
Ju
Sent by Cisco Support technique iPad App
-
Unable to connect as user sys on Windows machine
Hi all.
I feel the pain to get everything to move on a Windows machine, try to administer Oracle (I am a boy of Unix).
I can't connect to the db as user sys (I can like system and other schemes):
C:\Windows\System32 > sqlplus / as sysdbaSQL * more: Production of release 11.2.0.1.0 kills him Aug 4 08:55:39 2015
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
Enter the user name:Y at - it somewhere that I can go to solve this problem? I'm totally lost!
Oracle 11.2
Windows 2008 R2, Enterprise Edition.
Thank you in advance, I feel like a total noob.
DA
I think that the system user that you use cannot be in the dba group, so it didn't have the sysdba privilege.
Is this a user/pass @
as sysdba works? Rgds,
IonutC
-
Client VPN sail to 10.0.0.0 when you are connected to the Cisco VPN
I have a cisco ASA that provides access remote vpn for users. The address pool is 10.16.135.x. When a user (windows) connects to the VPN, a route to 10.0.0.0 255.0.0.0 is added to the routing table. If the private IP address of the user is in the 10.x.x.x range, the user can still connect to its local network. However, if the user has a remote site that also uses 10.x.x.x, the user is no longer able to connect to the remote site because of the 10.0.0.0 new road is added after the vpn connection is established.
10.0.0.0 255.0.0.0 on a 10.16.135.217 route 281
10.0.0.0 255.0.0.0 10.0.0.1 10.16.135.217 100
10.16.135.217 255.255.255.255 on a 10.16.135.217 route 281
Small,
Can you please set the pool like this:
mask 10.16.1.10 - 10.16.1.254 255.255.255.0 IP local pool Subnet_10
Test again and I would like to know the results.
Daniel Moreno
Please note all messages that will be useful
-
No Internet access after the connection of the cisco vpn client
Hi Experts,
Please check below config.the problem is vpn is connected but no internet access
on the computer after the vpn connection
ASA Version 8.0 (2)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
names of
!
interface Ethernet0/0
nameif outside
security-level 0
IP 192.168.10.10 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.14.12 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
!
2KFQnbNIdI.2KYOU encrypted passwd
passive FTP mode
standard access list dubai_splitTunnelAcl allow 192.168.14.0 255.255.255.0
INSIDE_nat0_outbound list of allowed ip extended access all 192.168.14.240 255.255.2
55.240
pager lines 24
Within 1500 MTU
Outside 1500 MTU
IP local pool testpool 192.168.14.240 - 192.168.14.250
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access INSIDE_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 192.168.10.12 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.14.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac setFirstSet
Crypto-map dynamic dyn1 1 set transform-set setFirstSet
Crypto-map dynamic dyn1 1jeu reverse-road
dynamic mymap 1 dyn1 ipsec-isakmp crypto map
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
password encrypted user testuser IqY6lTColo8VIF24 name
username password khans X5bLOVudYKsK1JS / encrypted privilege 15
tunnel-group mphone type remote access
tunnel-group mphone General attributes
address testpool pool
tunnel-group ipsec-attributes mphone
pre-shared-key *.
context of prompt hostname
Cryptochecksum:059363cdf78583da4e3324e8dfcefbf0
: end
ciscoasa #.Hello
Large. Try adding the below to make it work
vpn-sheep access list extended permits all ip 192.168.15.0 255.255.255.0
NAT (inside) 0-list of access vpn-sheep
Harish
-
WRT1200AC/1900AC WIRED Intermittent connectivity software company (Cisco) VPN - resolved
I work from a Home Office 24 x 7 as a software engineer supporting the business intelligence world production for a credit/bank card issuer applications - so my 'stuff' has to work. My components materials network and the machines are "top-shelf." I recently added a WRT1900AC router and have started to feel the intermittent connectivity WIRED to VPN my company (Cisco AnyConnect Secure Mobility Client). To be clear, this has nothing to do with the setting of the OpenVPN server is available via the user interface of the Linksys Smart Wi - Fi. In any case, after many hours of research and changes the configuration on the router (with a significant amount of curse and aggravation), I solved the problem by using the areas of prioritization of media and bandwidth downstream from the HMI. Question a also experienced, but to a lesser extent, during the wireless connection. It was confusing, since generally the when router problems occur, they seem to be more related to the Wi - Fi connection rather than wired. Anyway, I wanted to share this info with other poor souls that might have been ostrasized of their family, friends and colleagues as a result of this almost apocalyptic puzzle.
You are welcome. Happy holidays! Certainly happy to clarify as needed.
Maybe you are looking for
-
The iPod nano allows me to add music to apple's music or can only add music purchased at the nano?
The iPod nano allows me to add music to apple's music or can only add music purchased at the nano?
-
When I update my office, she open the windows 'search' Here's a link opens this window. How to solve the problem? If it is caused by a virus?
-
I need to (re) activate Windows, I think it's the fault of my USB hub
I have been using a USB hub recently. I only have a single reliable USB port (outside), so I plug it into that and into a less reliable port for more power. Sometimes, it works very well. Sometimes, the computer can not detect it, and sometimes th
-
How to program the temperature exceeds the set point (sp), it will be reduced below sp
I want to simulate a temperature between 15 and 30. When the temperature exceeds 26 it will slowly decrease until it reach below 26... I could only display in a different thermometer. How can I program it so that we can see the temp is reduced to a s
-
Hey guys,. I left my teenage step-daughter on my toshiba satilite pro for windows OS 7, he ended up with more illnesses than a time of war *, God bless them. I did a full factory reset and have lost my driver f0r my desk mixer. Model MG12XU 2014. Can