Re: Atheros LAN Driver preventing Windows from closing! Help!
Hello
I've owned a Toshiba Satellite L655-1HC for 6 months now and have always faced this problem where if I stop or restart my computer, it'll just say disconnect then stop, then the circle of rotation would just freeze and the laptop will never restart or shutdown unless I force it to holding the power button.
I always thought that this might be a program that I installed but today, I'm really annoyed with this problem and decided to do a test.
I formatted my laptop and installed a clean version of Windows 7 Professional (64 bit), I began to install the drivers that I acquired from the Toshiba Support Web site one by one and then restart to see what was the culprit.
It was with Atheros LAN Driver v1.0.0.26. This is the latest driver available on the support section of the Toshiba Web site for my laptop. As soon as I uninstalled it, I was able to reboot normally again and the laptop worked fine.
I have the latest version of the BIOS version 2.20 installed and all the updates of Windows with the installation of ANY software whatsoever at the moment.
Please help me find a updated driver for my laptop which will not have this problem.
My laptop specs are as follows:
TOSHIBA SATELLITE L655-1HC
Intel Core i5 M 480 @ 2.67 / 2.93 GHz.
8 GB RAM DDR3
ATI Mobility Radeon HD 5650 1 GB graphics card
15.6 "screen Toshiba TruBrite® HD TFT
Hitachi 500 GB (7200 RPM) HARD drive
Windows 7 Professional (x 64)
Thank you in advance.
The same thing happens when your laptop is factory settings and preinstalled original Toshiba recovery image?
When you're spending your laptop connected to the network via a LAN cable?
This occurs when the computer is disconnected from the network?
Tags: Toshiba
Similar Questions
-
Hello
After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
Then a window pops up saying "Startup Repair cannot repair this computer automatically.
The details of the problem say;
Problem event name: StartupRepairV2
Signature of the problem 01: AutoFailover
Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
Signature of the 04:65537 problem
Signature of the problem 05: unknown
Signature of the 06 problem: BadDisk
Signature of the 09 problem: unknown
Signature of the 10:1168 problemSystem Restore does nothing, and all the other tools of recovery. :(
Please help, it will be much apreciated :)
DOMIf you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates. MS - MVP - Elephant Boy computers - don't panic! -
A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006
Error comes when you try to connect.
-able to login in safe mode
-J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run
-Tried system restore
Any other solution?
Hello
- What were the changes made before the issue started?
You can check this link:You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer -
I use hp 3330 pro Micro tower PC, I need graphics &; Lan Driver for Windows 7
Hello Sir,
I use hp 3330 pro Micro tower PC, I need graphics & Lan Driver for Windows 7 32 bit. I need Intel HD graphics driver for my pc. I feel my modem internet connection problem. Please help me.
Hello
What is the version of your Windows 7? Please use the following link:
Kind regards.
-
WSD Print device device driver prevents computer from going into standby mode
WSD Print device device driver prevents computer from going into standby mode
This message indicates that the computer was unable to fall asleep by a device driver.
Look for the drivers updated printer manufacturers website or run the Microsoft Fixit:
-
HP 2000-2c27CL Lan driver for windows 7
Hello
I have a laptop HP 2000 - 2c27CL that I installed Windows 7 Professional 64 bit because I don't like Windows 8. I can't find the Lan Driver for Windows 7. It took me forever to find the wireless driver, but I finally got.
Please help me...
Thank you
DMEVid
Hello:
You can use all the drivers and the software of this model on your.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
You are looking for Realtek ethernet LAN driver...
If you have a controller SMBus needing a driver, you must download and install the drivers for the amd chipset, which is the first file in the list at the link below.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
-
computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally
Do you know when this problem started? Try a system restore to a point in time BEFORE the problem started. Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. Don't forget to check the box to show more than 5 days of restore points. If the first attempt fails, then try an earlier point or two. NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.
If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.
-
Re: Satellite P200-1FJ - LAN driver for Windows 7 64 bit
Can someone help me with the LAN driver for Satellite P200-1FJ? I have Windows 7 64 bit, when I ask for this driver in the toshiba site, reed "Sorry we couldn't find drivers corresponding to your search criteria."
Hi legiadb,
The drivers, you can download here:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversAs you've probably seen, there is no 64-bit Windows 7 driver available, so I recommend you test a 64 bit Vista driver.
It works on Windows 7?Solution check the Realtek page directly ;)
-
Satellite A205-S7443 - need LAN driver for Windows 7 32 bit
I have a Satellite A205-S7443 and I bought it with Vista. So now, I bought Windows 7 and install it but now I have the problem with ethernet LAN driver. When I installed Windows 7 it only detected the wireless lan card and the driver has been installed with Windows, but I don't have connection to the local network. There is no
Help guys. I need driver for ethernet LAN for Windows 7 32 bit
Thank you
Hey,.
After installing Windows 7 have installed all of the important drivers that you can find?
Your model of laptop is an American model, and so you can find all the drivers on the Toshiba U.S. page tools:
http://www.CSD.Toshiba.comIf you search for your model, you will find all the necessary stuff for Windows 7 32 bit. Download and install all the drivers, then your LAN port should operate as usual.
If you have any other questions, just post again ;)
-
Wireless LAN Driver for Windows 7
My model is 15-r038tu and I tried to downgrade winsows 7 Windows 8.
After that, I couldn't find the LAN driver wireless for Windows 7 in the HP website so it does not work.
Who is in the know and could you let me know which one is suited?
Hi, eddie_yu
-
HP pavilion g7: no good LAN driver for Windows Server
Hello
I'm trying to implement Windows Web Server 2008 as a second operating system.
System is installed, but I got the error with the network card Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS 6.0), Manager material poster 10 for this driver error code.
Could you help me with the right driver for Windows Server 2008 or how to solve this problem?
On Windows 7, everything is ok with LAN. Laptop is HP Pavilion g7-1253er
Thank you and best regards,
Sergey
Hi, Sergei:
You can try the driver for the CARD directly on the Realtek site.
Try the automatic installation, which is the 4th down on the list.
Best regards
Paul
-
Windows Malicious Software Removal Tool KB890830 computer preventing it from closing.
I use Windows XP and several months ago, I received to update KB890830 and installed it. As soon as the installation has been completed, I was unable to stop the computer. He would rather go through the reboot cycle and remains lit. I did a restore to an earlier date and the system worked as expected.
Several times since, then I did the updates Windows and inadvertenly included the KB890830 in the update and whenever the same process occurred - it makes a "restart" instead of "shut down".
Hello
· Do you have an error message when you try to shut down the system?
I suggest you to check the dump files and let us know for any errors. Click on the link below.
Windows XP restarts unexpectedly or restarts when you shut down the computer
http://support.Microsoft.com/kb/320299/en-us
I suggest you follow the steps mentioned in the article below.
Advanced Troubleshooting for shutdown problems in Windows XP
http://support.Microsoft.com/kb/308029/en-us
· Is it an optional update?
If it is then an optional update, you can hide. Click on the link below.
Windows Update or Microsoft Update offer updates for products that are not installed on the computer
-
I want compaq SG3350Il LAN DRIVER for WINDOWS XP
I WANT DRIVER FOR MY HP COMPAQ SG3350IL WINDOWS XP DESKTOP LAN... BECAUSE I CAN'T USE INTERNET AT BROADBAND WITHOUT DRIVER LAN. This is MY E-MAIL address:-[thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].
Follow the solutions set out in the following thread for download your drivers:
-
Satellite U940-d4m - LAN driver for Windows 7 needed
Hello! I install win 7 x 64 on my laptop of 940 - d4m (psu6sr-01m010ru), but I can't find driver for my network card. On the only windows drivers download page 8 and they did not work. Where can I find this driver?
I wish you can help me with this problem, thank you.
OK I found this driver, thx for the help.
-
Error is preventing Windows from starting
A message keeps appearing:
Windows didn't start because the following file is missing or damaged
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
You can try to repair this file by starting windows setup original CD ROM.select "r" on the first screen to start repair
I don't have the original disc start. What can I do?
Fiona
Hello
Thanks for posting in the Microsoft community
From your problem description, I understand that you are facing problem starting Windows. Please let me know if you do not experience this problem.1. don't you make changes to the computer before the show?
2. what operating system is installed on the computer?If you use a Windows OEM (OEM), the largest part of the OEM computer will come with the recovery console. Then sign in to the recovery console and perform the Startup Repair.
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
Maybe you are looking for
-
How to connect by Satellite L300-1 has 3 on TV?
I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see th
-
Sustainability T440s vs carbon X 1?
I'm in the market for a new laptop and I saw the X 1 touted for its reliability, but it looks like the t440s is as well built, spill, etc... Who would be considered the most durable (physical damage and a build-up of heat) of the two? Thank you!
-
LabVIEW: Failed the request for Identification
Hi all I am new to LabVIEW and all of the subject instrument interfacing. First of all, I am trying to connect my HP8110A pulse generator from my computer using the GPIB/USB (Agilent 82357 B) interface, and I NI-VISA (5.4) and Agilent VISA all instal
-
Re-installed Windows XP and now I can't see the network connections and cannot get online.
Our pc is down a few days ago, so we reinstalled xp. The xp upgrade. Now, we show no internet connection and can not get on the net. Our Device Manager indicates a problem with the drivers being not downloaded on the network adapters. Also the mo
-
I sent readyboost on a flash drive, how I sent?
I sent my USB readyboost key, how can I send it back?