Error is preventing Windows from starting

Similar Questions

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• computer automatically starts in safe mode without prompting, a problem with your computer might be preventing Windows from start normally__

  computer automatically starts in safe mode without prompting, a problem with your computer can prevent Windows to start normally

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  A problem is preventing Windows from accurately checking the license for this computer. Error code: 0 x 80090006

  Error comes when you try to connect.

  -able to login in safe mode

  -J' tried regsvr32 regwizc.dll, regsvr32 licdll.dll from start-> run

  -Tried system restore

  Any other solution?

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer
  http://support.Microsoft.com/kb/914232

• Windows update: error code preventing me from to update and upgrade to Windows 10.

  Original title: error codes

  error code preventing me from to update and upgrade to windows 8.1 and Windows Update 10

  Hmm, take a look on...

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  Having problems connecting?

• Error not allowing Windows not start

  My computer with Windows Vista, will not start.  It tells me that there is an error in my Windows application and allow me only so that it starts in repair mode.  In this mode, request a "another user name" and password... There is not a game I know.  If I hit F8 to try to start in safe mode with guests he brings me the same startup repair... help!  Thank you!

  Hello

  If you can get into the BIOS, I suggest you follow the steps in the following article to boot from the drive:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

• Error on startup: "Windows cannot start. A recent hardware or software change might be the cause.

  Original title: is that what Microsoft offers downloadable boot for Vista drive data

  I have a Windows error recovery when Windows does not start. A recent hardware or software change might be the cause.

   
  Loops in this form BACK to watch as it starts, it then restores to the error recovery screen.
  I need information from the startup disk so that I can read my Dell Inspiron 531 Windows disc and if all goes well the error; Download a Microsoft?

  Hello

  try a system restore of 1st

  If this does not download and use a startup, the ERD etc. neosmart

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Windows error 14001 prevents iTunes from loading on Windows XP

  I deleted all related apple software and then restarted, nothing prevents the pop-up box Windows 7 error 14001 blocks iTunes

  Not good enough, unfortunately.

  You have to remove iTunes and its software partner in a specific way and the sequence otherwise you get remainders of pieces on your PC/laptop.

  Go here: http://www.apple.com/support/itunes/ and select iTunes, then installing and uninstalling etc.

  And here: http://support.apple.com/kb/HT1925

  See you soon,.

  Jerry

• When turning on the pc, a problem is preventing windows from accurately checking the license on this computer to receive this error code. Error code 0 x 80090019

  cannot get into safe mode or can someone point me in the right direction many thanks

  Hi Steven,

  ·         You did changes to the computer before the show?

  Remove non-essential external devices and see if you can start very well. If you boot, then follow the suggestions of the following article to the error 0 x 80090019.

  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

  Reply with the results.

• prevent itunes from start in the windows of time 10

  Hello

  First of all sorry for my English, I'm french

  I am running windows 10 and iTunes launch systematically with my computer, but I shoot everything in msconfig (system configuration)-> startup and settings of the software, I didn't know anything, no option to uncheck, he writes "start with windows".
  I don't understand
  can someone help me
  Thank you

  UP please!

• error 0x800106ba prevents me from open Windows Defender - what to do next

  installed Windows Defender, but as I try to open it says error 0x800106ba - do not know what to do now.

  You do not install Windows Defender in Vista.

  Windows Defender is provided as part of the Vista operating system.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update error 80072efd prevents updates from mircosoft. I have AVG 2011

  How can I add exceptions for the AVG program. I'm not not very literate PC.

  See if this thread is useful.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a2141fe0-cfc8-4480-B854-80e24098cb9b>

  UTC/GMT is 11:04 Thursday, May 31, 2012

• Error of ORA_12514 open from starting after a stop, just improved 9i to 10g

  Hello
  
  Noobe here, once again! See you soon and good new year to all!
  
  How can I modify script to start db which was extinguished before the backup?
  
  We are experiencing a problem with backups, failure is running SQL * more start after his stop. I upgraded with success our 9i and 10g, 10.2.0.5.0 on Windows server 2003, 32-bit edition. We have a back_script.bat that runs only modifications I had to make in this context were the names for the new Oracle services, but this isn't a problem. When I saw the actions in the command file, it fails to sql > startup open; action, get the error "ORA-12514 TNS:listener does not currently of service requested in connect descriptor" which is different here between 9i and 10 g that now it does not work? Commenting on the line calling our oracle_stop_start.sql I get successful > exp dumps, but it could be running process because I'm not just prior to export.
  
  I have a complete picture of the physical server running in a virtual one that I am able to test. I hope that I won't put too much info here, but here is some information! The file batch and little stop_start script date from prior to my participation.
  
  Here are the relevant passages of our backup_script.bat:
  
  SET NLS_LANG = AMERICAN_AMERICA. UTF8
  SET ORACLE_SID = wind
  
  net stop Windchill3_MethodServer (the third application for the part that uses the database of the wind)
  
  @D:\ptc\windchill\backups\oracle_stop_start 'system/manager@wind as sysdba' sqlplus
  
  owner system/manager@wind exp = file=...\oracle_backup.dmp...etc comments, etc, etc.
  
  
  This is oracle_stop_start.sql
  
  stop immediately;
  startup, open;
  quit smoking
  
  
  As stated previously, this worked at least since 2007 where recent changes have been made in the batch file. Now, it will fail to sql > startup open; throw the ORA-12514 error. I can reproduce this execution of each statement in a DOS shell. The command shutdown closed, dismounts and stops the database. I tried to change the start statement for sql > START DISCOVERED wind. but who makes no difference. I found that if I get sql * more and reconnect / nolog (in the same shell window) so I can restart the instance, what I do is:
  

  /nolog sqlplus

  sql > connect sys / * have sysdba;
  SQL > startup open the wind;
  
  This starts the Oracle instance successfully, mount and open the database. Otherwise, how would I do that? I certainly can duplicate these actions, by adding the lines necessary for oracle_start_stop.sql, but is there a better and cleaner way to do this? Right now, I just want to these existing scripts. Once this is done, then I'll study and learn more about RMAN and datapump export/import and update our backup procedures.
  
  The reflections and suggestions?
  
  Thank you
  Tom

  It may be a difference in behavior between 9i and 10g. Looks like you connect through sql * net (sqlplus "system/manager@wind as sysdba), then the parameter ORACLE_SID is not part of your connection. When the database is shutdown you are no longer connected to a database. When you issue the command to start the ORACLE_SID is not defined, so there is no specified service.

  If you run this on the database server, try setting the ORACLE_SID and then run your script like:

  {code} sqlplus ' system/manager as sysdba' @D:\ptc\windchill\backups\oracle_stop_start {code}

  and you should always have the service for your connection.

  John

• Error when reinstalling windows from recovery disks

  My laptop crashed and could not find Windows, so I ordered a recovery disk (TR-IM00209299 - Win7 64 bit HomePremium (NH) SP1) through Toshiba recovery media shop. Now that I got the Windows 7 recovery discs, but they do not install successfully, and I'm not clear if there is an error on the discs I received or a problem with the hardware. Here are the details of the error. Is it a mistake that some of you know? Please notify

  Unpack the system/Windows re...
  L ' ImageX for Windows tool
  Copyright Microsoft Corp. All rights reserved.
  Version6.1.7600.16385

  Error opening file V:\HDDRecovery\SWImg\15583XSP.swm
  These data are incorrect.

  ERROR: ImageX could not apply system/WinRE V:\HDDRecovery\SWImg\15583XSP.swm index 1 of the HARD drive to W:!
  Press any key to continue

  Are you able to boot from other bootable disks?
  If so, then it means that your hardware (optical disc ODD) should be ok and the problem is associated with disc.

  Contact the reseller of disc (Arvato?) and ask again drive

• Script error message prevents printing from Explorer or send an e-mail using HP deskjet 3050 a 3611 series

  A series of 3611 using HP Deskjet 3050 has (last new material before problem) on Windows 7 64-bit and Windows Internet Explorer 9.1.10 - when I try to print I get no numbered error reading message "an error has occurred in the script on this page" it goes then with some details that vary with the material, I am trying to print, and then I can't print - I did some Internet research and could not get (or understand) suggested methods of repair other than comments - which suggest that HP is a source of this type of problem - or the last loaded device - I rebooted HP a couple of times with no benefit - the HP print well from a source other than the Windows Explorer or G-mail - I use a workaround to copy my wording of the text and print it easily - suggestions?

  You will just need to clear your cache and you should be able to print again from the Explorer and e-mail. Here's a link below that will help you on how to clear the cache.

  http://www.WikiHow.com/clear-your-browser%27s-cache#Internet_Explorer_9

  Hope this helps, thanks.