Re: bluescreen kernel_data_inpage_error-Equium L40

Similar Questions

• Equium L40-14i does not power up if its cold

  When I push the power button down when the machine is cold, green power light comes on for about 2 seconds, then turns off. If I give the laptop a little sweet heat for 30 seconds, the notebook starts up the first time and works perfectly until the machine is turned off. The laptop is Equium L40-14i

  Hope someone can help with this strange problem.

  Hmm laptop Equium L40 is an older model, it is possible that some parts of the motherboard (maybe electronic power) does not work as it should.

  By the way: before talking about some problems of motherboard, you should check if the laptop works properly using another job good and checked power adapter.

• Equium L40 10 X flashing green power light

  Hi guys,.

  I have an old Equium L40 that I haven't used in a while.

  Now when I plug the power adapter into the power green led just blinks constantly.
  I checked the blink codes, but I can't find one for mine. It simply turns green for a second then off.
  Then green for a second then off the coast and that constantly.

  I tried to remove the battery for a few minutes and then hold the power button for a minute, but I just get the same result. The adapter is one that came with the laptop and as far as I can tell works very well.

  Other ideas would be greatly appreciated!

  Thank you guys!

  Hello

  Indicator power (DC IN) indicates the status of the power supply with the power adapter plugged.
  (Without flashing) Green means supply and the computer is turned on.
  The power light on the front of the computer lights green when the computer is turned on.
  Flashing orange indicates power to the computer while the laptop is in mode 'sleep'.

  Unfortunately, the DC IN green flashing red state looks like a hardware problem.
  Probably the power supplied to the laptop is abnormal or there are a few problems with electronic power on the motherboard.

  By the way: Please check the memory modules live. Blow an and test the device using that one module in each slot. Check the two modules.
  A few years ago, a friend of mine had some problems with the laptop. The flashing light indicates the issue of RAM

• Equium L40 is not connecting to internet

  I have an Equium L40 it does not connect to internet with wifi or the head of the ubs.

  The laptop comes up:
  Internet Explorer has stopped working
  A problem caused the blocking of the program works correctly.

  It says it is connected to my wifi bt hub and has a signal strong.
  Why it will not connect either cable or WiFi?

  Any ideas.

  Steven

  Hello Steven

  It is not easy to provide a response based on the description of your problem.
  If you use connection WLAN make sure wireless network adapter is installed, enabled and configured correctly.

  USB cable? What type of USB cable do you use?

• Equium L40-10 X - audio drivers do not work on Windows XP

  I recently reinstalled XP on my equium L40-10 x. Unfortunately, the audio drivers from the Toshiba support site does not work for me - are there other drivers that are known to work?
  I didn't load the available disks and need something on the net - link?

  Thank you.

  Hi cecilrosa,

  I n t have Equium L40 but I'm pretty sure that the audio drivers are working properly. The point is that you need to first install Service Pack 3 before you can install the audio driver.

  So to remove the current sound driver and install Service Pack 3 for Windows XP. After that, you can try reinstalling the audio driver.

  Check this box!

• Equium L40 - Vista won't start after installation of product recovery

  Hello

  I had to realize a product uses recovery provided restore disk on an Equium L40 computer laptop (PLS41). The recovery procedure done his job to the end, reformats and copy all the files and then restarts. Now the problem starts...
  The pc gets in front of the BIOS boot screen, then it goes completely black with only a cursor to underscore flashing in the upper corner of the screen. No HARD or CD-rom drive activity.

  I did the cover about ten times now. All with the same result. I tried the repair procedure using a Vista boot CD and I also tried using another disk supplied with the computer, anytime upgrade from Vista. Here they are without defects, see the hard drive and shows that the vista files are on it, also sees the winRE partition.

  I tired even fresh install from the disc at any time. It also reformats the disk, copies and decompresses all files needed, begins to install the updates on the disk and then said: he needs to restart. It restarts and goes to black screen with flashing underscore cursor. What happens if I press the 'coup of any key to boot from CD' or leave it to boot from the HARD drive.

  I tried to fix this for two days now, including endless hours of forum to research, the computer belongs to my friend gets very angry I am. I need help. No one knows how to fix?

  Hello

  According to your message, I think that the HARD drive is faulty.
  I think there's a defective recording of MBR (MBR) of the drive and therefore the laptop refuses to boot.

  One question; have you tried to set the BIOS default settings? If this is not the case, try this.

  If it doesn t help and the laptop still does not start upward, then you should ask ASP for verification.
  I think it s a problem of HARD disk and, possibly, the HARD drive must be replaced!

  Greetings

• How recover Equium L40-10 X?

  Hello

  I'm trying to reboot my computer to factory settings do not know how to do this I need a floppy or there at - it something built into the laptop.

  Any help much appreciated.

  I have an Equium L40-10 X.

  Thank you

  Very simple;

  -Insert the CD called recovery CD
  -Boot from CD/DVD drive
  -Follow the instructions on-screen ;)

  All that s. It of very simple!

  Just FYI; the installation of the recovery CD will erase the whole HARD drive. So eventually back up your data before using Recovery CD

• Equium L40-10 X - hardware upgrade options

  Hi all, I hope someone can help me.

  I have a few problems that I wish to address with my laptop. The first is an overheating problem. Is there a cooling system that I can install to help with this problem?

  I know I can improve my RAM, I currently have only 1 GB, but I heard that I can have only a maximum of 2 GB. It is not a problem if that's true, but if I get more I would.

  Last thing I want to ask, is whether or not I can upgrade the internal memory, I currently have 120GB. If I is something I can do myself?

  I appreciate any help you can give

  Hey,.

  1 if you have overheating problems then just clean the cooling assembly. You need not just a new or better, cooler jet of compressed air. ;)
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  2. Yes, you can upgrade the RAM to 2 GB. That s the maximum capacity for this model to Toshiba specifications.
  The part number for a 1 GB module is PA3512U-1M1G

  3. you can also upgrade the HARD drive, that s no problem.
  AFAIK Equium L40 supports SATA already then you can buy each HARD drive with this interface. There is no capacity limit.

  I hope I could help you :)

• Equium L40 DVD Multi drive - do not burn files to DVD

  Hello

  Whenever I try to burn files to DVD discs using my dvd/rw drive, it holds in check the same point and comes with the invalid 'MS-DOS function' error. CDs write very well that it's just the DVD.

  Please could someone help with this problem?

  Equium L40 series
  Vista operating system
  My * a DVD-RAM UJ-850 s

  Hello

  What burning software did you use?

  I use Nero, and I've never had any problems!

• Equium L40-10 x black screen

  OK, I'm at my wits end with this one

  Equium L40 - 10 x screen went dark. Can know roughly if brandi for screen light. Works fine when connected to the external display.

  Replaced the power inverter - still black screen
  Replaced screen - screen still black
  Replaced the screen cable - still black screen

  Only other thing I can think is too that the replacement inverter was defective?

  What else could be?

  > Can know about if brandi for screen light. Works fine when connected to the external display.

  He is a singing typical of FL inverter problem
  The FL inverter is part hidden behind plastic frame and control the hand lit display.
  I guess it must be replaced

  New part can be bought from authorized maintainer Toshiba
  Get in touch with the guys in your country and ask to fix.

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Updated BIOS for Equium L40

  Hello
  I have an Equium L40 x 10 with PSL41E model number. This update will work with it?:
  http://UK.computers.Toshiba-Europe.com/innovation/download_bios.jsp?service=UK

  He said he works with only with the numbers of model PSL40x, PSL41x or PSL43x, don't know if the x is a model number or designates any letter?
  Thank you.

  Out of curiosity: you have a serious problem with your laptop? I mean what is the reason for the update of the BIOS?

• Equium L40 - 17 M - how to reset the user password

  This is probably a really basic question, so I hope you can help!

  I forgot my password for my Equium L40 - 17 M.
  When I click on "reset password" under my user icon it says: "this feature requires removable media such as a floppy disk or USB flash drive" - that means? What should I do?

  Please keep you language simple I'm not technical!
  Thank you

  Hello

  I assume you are using the Vista operating system.
  In order to reset the password, you will need a password reset disk

  Here's a nice description of how to create a password reset disk:
  http://www.Vistax64.com/tutorials/101993-password-reset-disk.html

  and here you can find an instruction how to use this disk to reset the password:
  http://www.Vistax64.com/tutorials/102005-reset-user-account-password.html
  But note; the password reset disk can be created if you would be able to connect to Windows Vista.

  But if you would not be able to create the password reset disk, then you can try using the three method which is also described in the statement.

  Good luck

• Re: Equium L40 - Windows 7 and the wireless switch

  I upgraded my Equium L40 to Windows 7 and now, wireless equipment and F8 function switch switch the WLAN on and outside. It is permanently.

  Also, even if it is enabled in the Windows 7 power options, close the lid won't be thecomputer to sleep. If I close it turns off the screen but doen't make Windows 7 options.

  When I upgraded to Windows 7, I chose the option to do as a new installation and therefore lost my Vista installation.

  I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.

  Is there something else I need to do for the WLAN switch and cover works with Windows 7? Any help gratefully received.

  See you soon,.

  Ray D

  > I have download all the drivers for Windows 7 on the Toshiba site, even if there were not many.
  What L40 you exactly (L40 - xxx). I just want to check if your model of laptop is fully supported for Win7.

• Equium L40-10 X: need details on memory

  I think to upgrade the RAM on the above, but can't find the model or specification on the UK site (other members of the family range Equium are in the "Portable computers" section of the Web page, but my model is not frustrating!).

  I am particularly interested because I want to get the right type of memory (original or generic) - users can help me on this?
  My main reason for increase the RAM memory, is that the laptop seems desperately slow with 1 GB of ram standard which I think is mounted 2 x 512 MB.

  If all users have other tips to speed up the laptop, let me know.

  By the way, turning takes about 50-60 seconds and shutdwon 40-50 seconds, is this normal.
  The laptop is currently to form specifications with.

  Don t found the Equium L40 - 10 X but 10U.
  However, the two laptops are identical.

  According to [this | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=35780&ft=m&st=3] page, you can use DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM

  Greetings