Re: CC PP - Hit "Close" and at the top right of the video preview disappeared.

Similar Questions

• NetBook XP, start-up stalls, must close and load the last well-known configni, no virus on check, no file of 0 k on check

  NetBook XP, start-up stalls, must close and load the last well-known configni, no virus on check, no file of 0 k on check.  Help!

  Hi Matthew,

  This is mcafee.  I uninstalled and reinstalled and now it works perfectly.  Thanks a lot for your help.  HPK

• computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing. How can I save this monster?

  computer restored IBM won't let me go beyond the introduction of identy... closes and restarts the computer to the same: Enter name and ID... then again, it does the same thing.  How can I save this monster?

  Hello

  First, disconnect all the external devices connected to the computer, and then try to start and check what is happening. If the same happens, then you can try to start in safe mode and check if you are able to boot to the desktop. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "the creation of the video preview failed" to DV (firewire) and USB webcam camera

  Device Manager reports the two devices "working properly", but all attempts to use their failure any software I use.  The error varies with the software package.  Trying to get a preview of the video via "My Computer" results in the error "the creation of the video preview failed".

  Devices used for work several months ago but I don't remember exactly when they stopped working.  A Service Pack or some other Windows Update update may have caused the problem (not sure).

  Any help would be greatly appreciated.

  [My system: Windows XP (Media Center Edition), Service Pack 3, Dell Dimension, Intel Core 2, 1 GB of RAM]

  Nevermind, it works now.  For those who have the same problem, here's what I did to remedy.

  1. take DirectShowSpy.dll of Roman Ryltsov http://alax.info/blog/777 and at the command prompt, type "regsvr32 DirectShowSpy.dll" to save it.  (In fact, I used a previous incarnation, also by Roman Ryltsov, called FilterGraphSpy.dll that I had downloaded previously).

  2 - try to use your webcam or your DV camera again.  If it works, you can uninstall DirectShowSpy.dll by typing "regsvr32 /u DirectShowSpy.dll".  My camera and webcam continued to work properly after I uninstalled it FilterGraphSpy.dll.

  That's all.  Although I did some DirectShow programming, I don't know the reasons detailed why this would clearly be this specific problem.  Roman could.  Good luck.

• Try to get rid of an audio file that is unwanted in the media library and half the music library disappears

  I'm trying to get rid of an audio file that is unwanted in the media library and half the music library disappears and spend a moment difficult to come back. Sometimes the songs I want to keep are followed and even triple, the same file read 3 times. I try to correct the error to remove extras and half the disappears from the list again... That the ho-ha happens?...

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that the songs on windows media player reproduces. To get resolution on this issue, provide us information.

  1. you receive an error message on the computer?
  2. don't you make changes on the computer before the show?

  Method 1:

  Run the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:
  It could be that the Windows media Player library is corrupted. I suggest you follow the steps mentioned below.

  Step 1:

  a. exit Windows Media Player.

  b. Click Start, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.

  c. Select all files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  e. launch Windows Media Player and check.

  Step 2:

  If step 1 does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If you have any other questions about windows, write to us, at any time.

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• Fehler bei Videovorschau - Fehler beim create movies. (Error in the video Preview - 'film compilation error. Unknown error.)

  Hallo,

  ICH habe seit Kurzem problem beim Exportieren aus Premiere Pro 2015.2.

  ES opens sich ein Fenster mit found message:

  "Fehler bei Videovorschau - Fehler beim create movies. Unbekannter Fehler . »
  
  As sharps Fehlers habe ich meinen Rechner neu aufgesetzt, aber er is experienced.

  Ich weiss, wie also provozieren kann ich jetzt Aber. Wenn ich beim export die Zielbitrate [Mbps:]

  Auf unter 10 stelle tritt der Fehler auf.

  =======================================================

  Hello

  I recently problems when exporting from Premiere Pro 2015.2.

  It opens a window with the following message:

  "Error in the video Preview - 'film compilation error." Unknown error. ».

  Because of this error, I restarted my computer, but he persists.

  I know now how I can cause the error. When I export the movie and put the target bit rate [Mbit / s:]

  less than 10, the error occurs.
  
  ==========================================================
  
  Windows Pro 10
  First Pro CC 2015.2
  Intel Core i7 - 4930 K CPU 3, 40GHz
  32 GB of RAM (checked with MemTest, no error)
  NVIDIA GeForce GTX 780 (game ready Driver, Version 368.39)

  With the 2015.3 version, the problems seem to have disappeared.

• Position of the 3D camera in different from the position of the camera in the video preview window

  Hi all

  I'm trying the 3D features and animation of Photoshop for the first time. The model is a model free 3DS. Because After Effects can't import this format, I'm the animation in Photoshop against a "green screen" I'll then chrominance out in After Effects.

  The problem is that the output video rendering viewport / camera position that does not match the preview window in Photoshop.

  In the screenshots below, I covered the video rendering on the 3D workspace. In the first image, the video preview and timeline are identical. However, since the second image, they diverge. (Translucent cow is video overlay).

  The first time, I simply clicked "default camera" before rendering. The second time, I added a key frame position of camera 3D for the 3D layer and set it to the default camera. The result was the same both times.

  I would be grateful for any help to make the video jump made the preview window.

  Thank you.

  

  

  

  

  

  This has been resolved in chatting with Adobe Support.

  It turned out to be a problem with preference files corrupted in %appdata%\Roaming\Adobe\Adobe CC in Photoshop.

  Move this folder to the office solved the problem

• When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  

  Which turns off.

• to download a song or a film, I had to close and reopen the firefox browser to get a start of download, why? and what is the solution to my problem?

  When I select a video or movie in youtube to download after clicking on the download button, it is added to the download list, but the download will not start. After you close the browser and restart the download will automatically start... for every time to start download closing and re-opening distrubing my job so please find me a solution

  Hello uday.kumar, as your question seems to be on the 1-Click YouTube Video Downloader addon, please contact directly the developers of extension by the way to their home page - they can probably give you more detailed advice and are the only ones who can fix bugs or make necessary adjustments in the addon. Thank you...

• Close and reduce the buttons at the top right

  In the version 33.02 Close and Minimize buttons in the upper right platform with holding the mouse pointer over a link or off please fix this bug several times

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also try a different theme of Windows to see if there is one that works better.

• I think someone is hacking my visit Web sites and IP address. Some sites do not open. When I try to open mozilla 1 message is displayed indicating that a single firefox is open and does not first close and reboot the system.

  At present 2 sites not open. When I am trying to open these sites to be ' problem loading page or the Web site you are looking for does not appear. These two messages are displayed.

  Try to clear your browser's cache.

  Tools > clear recent history... - details and of course Cache hit only is selected, and then select all and click the clear now button.

• When I open IE msg said "a problem with this web page caused IE to close and reopen the tab."

  I have a Compaq CQ60-202US about 3 years and all of a sudden, without making any change in the software that I am aware, whenever I try to open Internet Explorer, it gives me this message, "a problem with this web page caused IE to close & reopen the tab."  I can open Google without any problem. I upgraded to IE 9, but that made no difference. I don't really know what it takes to solve this problem.

  Hello

  You can try resetting Internet Explorer as follows: be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  In case of failure to correct the problem and you are using Windows 7, follow these steps.

  Click on the Start Menu and select Control Panel.  Open programs and features, click on "Windows turn features on or off" and remove the check mark next to Internet Explorer 9 click Yes, then OK and then when restart the laptop.

  When Windows has restarted, click the Start Menu and select Control Panel.  Open programs and features, click on "Windows turn features on or off" and re-enter the checkmark next to Internet Explorer 9.  Click Yes and then OK and when it is finished installing, restart the computer again.

  Kind regards

  DP - K

• Keyboard does not close and loses the connection.

  Hi guys,.

  Having a problem at the time with input boxes and the keyboard to phonegap. the issue appears only on apple devices. It is very well on Android. We get an application of simple connection with two input fields:

  

  Now, when we enter a correct user name and password, the keyboard disappears and the app moves on. The quirk seems to be when using incorrect credentials. The keyboard stays on the screen and the cursor remains in the last box you typed in. However, by pressing the keys on the keyboard has no effect on the box. By selecting other credentials of entry also has the same effect. You must close the manually close the keyboard and press again on one of the boxes.

  I have tested on several iPhones and iPads with the same effect. When I run the site directly into a browser rather than through phonegap, it works as expected; The keyboard closes and an error message is displayed. I tried calling blur() on entry on touchstart and touchstart event fields and tried focusing on the button "login" during the presentation, but they seem to have no effect.

  Anyone seen this before? If you need more info let me know.

  Thank you

  James

  I have to guess here:

  -It really has nothing to do with the "evil powers". It's how you manage the entry that does not have the keyboard disappear (again)

  -a page switch, the keyboard will disappear

  -I guess the keyboard also disappears when the form is submitted, but not (yet) on the touchstart event

  Then; I suggest catch you to the event of the form, then use ajax to send data to the server.

• Is it just me or does Photoshop CC remembers what tools I used last when I close and reopen the program?

  Hi all!

  I have years of experience using Photoshop, and I have used CC for quite a while now. Last year, I used a different computer more powerful than I have now, but I don't remember ever having this problem. It is less of a problem and more of a preference, but its still slow me down. Whenever I open it Photoshop (I only noticed this in Photoshop until now) my workspace is saved, but my toolbar doesn't remember the last tools I was using.

  For example: if I've been using the polygonal lasso tool, then close Photoshop and reopen, it is by default in the standard lasso tool.

  Does anyone know if there is a way to save what tools were used for the purpose or more often?

  Thanks in advance!

  [Moved from the living room Forum for specific forum - Mod]

  Photoshop CC 2015 still remembers the tool, I'm the last one used. This looks like a problem suddenly, and many times they can clear up by a tidal wave of preference.

  Try to reset the Photoshop preferences file:

  Manually; course may be cancelled:

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

  Fast; cannot be undone:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.