Re: E300 Satellite auto connect wireless

Similar Questions

• How to disable the auto connect wireless in windows 7

  every time I turn on my pc it connects to the WiFi automatically, I want to know how to disable this option, I want that it ask me to put the password key to connect to my wireless network, at the same time that it always automatically connect pls give me the solution to this...

  for the first time that I have connected to the wireless network, he asked me to put in the password to connect, now everytime I turn on the computer it connects to the net without prompt to put me in the authentication key...

  Go to control panel > all items in the control panel > network and sharing Center > manage network wireless (in the left pane) and right click the one you want to change, and then click Properties > tab connection.

  There are three fields that can be changed: automatically connect when range, connect to a more preferred network and connect even if the network is not broadcasting. Change them accordingly.

• question of M175nw network connection wireless home

  I can't configure my printer using the Setup Wizard to connect wirlessly to my home network. I tried on a Windows PC and a MACBook without success.

  Printing and scanning works very well when it is connected via a USB cable.  When you run the Setup Wizard, I chose the auto connect wireless HP.  While the printer is connected via USB, it can not find a printer set up.  The wheel of the State keeps just spinning.

  Hi njphil,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you are unable to set up the printer on the wireless network.

  I'll be happy to help you.

  Make sure that the two computers are on the same network.

  I have provided a lot of steps to set up the wireless thanks to direct wireless configuration that will allow then to print wireless on both computers. This is the simplest method.

  On the printer, press the setup button, the Setup menu (key) and select network, select wireless menu, select direct wireless and turn it on.

  On a Mac, go to the airport in the upper part of the screen and select the name of the network printer in the list. Wait for about 1 minute.
  Then, open Safari and type the IP address (192.168.223.1) of the printer in the address bar.
  This will load the web server integrated for the printer.
  Select the networking, Wi - Fi on the left side.
  Fill in all your information network, select infrastructure, select the name of your network, set password and encryption type.
  Apply the settings.

  Wait a few minutes.
  Should have a flashing light sound wireless to the printer.

  Return to the airport, and then select the name of your network.

  If the software is already installed on the Mac, then go to the Apple system, print and scan preferences.
  Click on the + to select the printer.
  Make sure that shows the name of the printer and not the driver Airprint.
  Click on Add.

  Now test the printer.

  On the computer Windows you can now restart the cd or you can go to start, devices and printers, across the top of the page, select Add a printer, and then run the wizard to complete the installation of the printer on the computer.

  Test the printer now.

  I think that this will provide a solution to your problem. Thank you.

• Connection Satellite L300D and wireless

  Hello

  My daughter shares one House with 3 others in college and they have Sky Broadband, they can all connect outside him, she has a Toshiba Satellite L300D 243 wireless network is visible but cannot connect.
  I talked to the sky and they said I need to change the wireless adapter for WPA encryption, someone at - it ideas how to do this or other ideas please.

  Concerning

  Richard

  Hello Richard

  First a general question: is there a problem with sky only or your daughter can not connect wireless in general?

• Unable to connect wireless on Satellite L300D-13 s

  Bought this new laptop Satellite L300D-13 s
  The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

  Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

  Hello

  The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
  So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
  Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
  Also make sure that your router supports standard WLan even as the WLan card.

  Welcome them

• Satellite M70-173: wireless connection is not working properly

  Hello

  I am a novice and need help with Wi - Fi. I have laptop Satellite M70-173. My desktop pc is connected to the Netgear MR814v3
  802 11b cable/DSL with wireless router. I have connected the router to my broadband (telewest) and have access to the internet on my desktop pc. I turned on the connection Wireless via the menu of the router (the lights is on the router it's transmission). My wireless laptop is switiched on, BUT when I use windows on the laptop to get a wireless connection, nothing is detected. The laptop is 50 cm from the router. I tried and did the following:

  Firmware update,
  Made sure the SSID is the same on the router and the laptop.
  Wireless on laptop mode is on infrastructure,
  Wireless access point is enabled.
  List of access on the router is enabled,
  No encryption is used until I have run

  Any ideas any help?

  Thank you

  Hello

  Have you activated the wireless antenna?
  Please check if the switch wireless on the side of the unit is on. Also check if the wireless is turned on with the FN + F8 key combination

  Please check this possibility

  Concerning

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.

• Satellite Pro L650 - wireless connectivity problems

  I recently started having problems to be able to connect wirelessly.

  laptop is able to find connections to home and my wireless router. but it is impossible to connect. or when it does, the soons connection becomes broken and she begins searching for signals to connect to. I'm literally just 2 metres from the router, signed lstrength or interference is not a problem. I have no problem connecting via a LAN cable.

  This question has recently developed after having had no problem before, and it's really annoying me now!

  I should just be able to switch on my laptop (whether at home or office) and he just needs to connect to internet automatically!

  I hope someone out there can tell me what to do as this beyond embarrassing. I tried to uninstall driver and reboot system below. He still does not!

  laptop - Satellite Pro L650
  Network – Broadcom 802.11n adapter
  5.60.48.35 driver version

  If you would like more information, let me know.

  Thank you

  Post edited by: dazzablack

  Hi dazzablack,

  What operating system is installed on your laptop? You use the preinstalled version of Windows 7 in Toshiba or your own installation?

  Maybe the problem has something to do with the WLAN energy saving settings. I check the Windows power management and set the card WLAN for maximum performance. If you can ensure that you will always have the best performance of WLAN. :)

• Satellite Pro 4600 Wireless card does not work with WIN2K?

  I have a Satellite Pro 4600 with UK dealer PA3070U-1MPC wireless operating with Windows 2000 card

  The wireless client Manager detects the network from my wireless router and the signal is excellent and I see all the Green swhowing bars.

  But I can't mske a connection in 'connections' wireless says "network cable is disconnected.

  the router works well with other laptops in my house.

  I have the latest version of Win2K also downloaded and installed the latest versions of client manager and WLAN driver for win2k to the toshiba Web site.

  'Support of toshiba in Turkey' told me ' I need another driver for Win2K for my driver wireless card cause win2K on the toshiba site isn't for "thie" wireless card ". I have been waiting for this for 3 weeks now and couldn't join the UK level 3 elusive support who supposed to have this driver. I saw on the internet is the same wireless card was sold as an accessory "made by toshiba" and he said that it is compatible with Wim2K

  What I then please? It works with Win2K, is it "another driver" and so on?

  Thank you

  Hello

  I don t think that there is something wrong with the driver because you can receive signals from router (green bars). If the driver WLan would be a mistake if wouldn t receive all signals.
  Please check device manager. If the wireless card is recognized if you are using the correct driver and the driver has been installed correctly.
  Please see this page:
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB000705.htm

  In my view, the message "network cable is disconnected" appears because your (NOT wireless) LAN cable is not connected. This post has nothing to do with the question of Wlan.
  You should check your WLan settings again.

• Re: Satellite L500D - speed wireless worsens considerably with lid closed

  Hello

  The last 3 days have been nerve wrecking for me. I am the owner of a Satellite L500 D and at the moment, I decided to connect it to an external monitor, to enjoy a better visual experience, until I have buy a desktop computer.

  Well, day 1, I had problems with the speed of the wireless connection (the laptop is related to the router via a wireless connection only). Physically, what I've done, it is simply connect the monitor to the laptop, while closing the lid, so it won't get in the way. And Yes, I had already checked the 'Status quo' feature in the desktop "when I close the lid of my laptop.

  I went to a speed of 30 Mbpps to love... 1 Mbpps, or even less, so that it becomes almost unbearable for surfing the web, let alone to download all the files. After calling my ISP support line and a subsequent visit by a technician (he's even changed the router), we were convinced that the problem lied in the router, or disruptions in the connections wireless neighbors, microwave ovens, cell phones, that sort of thing. I even thought that the problem had something to do with my wireless keyboard/mouse set that might interfere with the connection because it uses the same 2.4 Ghz band range.

  After spending a lot of time to ruin my head, I suddenly noticed how the speed would increase simply by opening the lid of the laptop. And the surprise... If I just lift the lid a bit (like 10 cm) above the keyboard, I hear a sound of 'connection' and therefore, the connection speed is always high.

  Have you ever had such an experience? Is the antenna (is it located anywhere in the keyboard?) of the adapter that stops whenever I close the lid? Is it possible to permanently program the computer to have the connection all the time?
  Well, it has been an experience painfully education

  Appreciate your comments/solutions

  Paulo

  Hi Paulo

  We speak/write here on laptops and computers laptops are designed for mobile use and all of the material placed in the laptop is also optimized for mobile use. It is logical that wireless antenna must be placed in the book part where it can get better WLAN signal. Because of this key WLAN antenna is placed around the screen. When you open the display WLAN antenna is best placed to pick up WLAN signal.

  If you want to use the laptop as the lace and desktop replacement by with closed side cover I recommend using connectivity LAN only or perhaps some external WLAN as WLAN USB stick antenna.

• Little or no connectivity wireless on my Equium M70

  I can't get my satellite m70 connect to a BT Hub wirelessly, I get the message connectivity little or no, I tried the option repair but this returns an ip error message and I have still no internet connection.

  I have another laptop running Windows XP with SP2 and it works perfectly. It's a faulty laptop?
  Any ideas would be greatly appreciated.
  See you soon
  Steve

  Hello Steve

  In my opinion, the laptop is not defective, but you make a mistake.
  I put t know how you establish connectivity. Do you use WIFI or Bluetooth? Those are two different things.

  If you have the signal on connectivity bit I guess you know what you're doing. I assume that your device has Intel 2200 B/G WLAN card. Sometimes there is interruption of the connection. This problem is known and you should try to install the latest Intel driver for the WLAN card.

  You can find it on this page http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=1637&lang=eng

  Good luck!

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• Satellite C660-2EL - Wireless n and the F8 function key does not show

  Satellite C660-2EL - Wireless works sometimes, but mostly not. Wired connection is ok. When does not not Fn 8 does not appear and the wireless card does not appear in the devices.
  Pilot was handed in place.

  Have tried reset default and many other things - yesterday was working - light today and not...

  Help!

  Hello

  If the wireless network adapter does not work or its lack in the device, the FN + F8 key combination Manager would not work.
  So the problem is your wireless network card.

  The WLan card driver is missing or malfunctioning of the WiFi chip.
  The device uses the Realtek RTL8188CE WLan card.
  Have you installed the chip RTL8188CE WLan driver?
  Make sure what you've done!

  Otherwise, if the WLan card is not listed in the Manager (no unknown device or Ethernet controller) devices marked with yellow exclamation point I guess that the module is faulty.

• HP dv7t 7200 wifi like no auto connection

  whenever I turn on my laptop, it connects to the WiFi for a short period of time and then dissconnects and I have to reconnect to the network manually. After doing this, it takes an extremely long time to login automatic and says "network connection takes longer than usual. I have the wireless card/adapter "Intel Centrino Wireless - N 2230" and the driver version is "15.10.3.2" I don't know if it comes to the latest version, but I tried to update and was not able to do this successfully. any help would be appreciated thanks in advance. This happens also on any wifi I connect, wi - fi even I log in for the first time takes an extremely long time to connect (2-5 minutes).

  any help to solve this problem for my computer to quickly connect / auto connect to networks again would be greatly apreciated.

  p.s. I've ever experienced this problem when I got the laptop first, so I don't know that it's happened in the past 6 months - 1 year.

  

  I managed to sucesfully (at least temporarily) fix the slow connection error by uninstalling my network adapter (I left her uninstall driver box unchecked during this operation) in devices, reboot and then Connection Manager. It is connected to the normal speed. I have not yet tested to see if the same problem has been resolved, but I'll come back to that when I test it later.

• My toshiba laptop is not getting connected wireless if I have SID and key no.

  I have the model Toshiba Satellite laptop and I am not able to connect to a wireless home line. If I have SID and no. Key, my laptop is not be connected. I used it earlier.

  You will be please to restore the settings the parameter as he cites the 87122 defect.
  Thanking you,
  Manguin
  / * original title: my computer is toshiba laptop connect wireless if I have SID and key no. I * /.

  Have you applied the hotfix in this article?

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless