Firewall does not illuminate

Similar Questions

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Windows Firewall does not illuminate

  From: nsmartinez46

   

  I just had this problem recently. When I start my computer, there is a pop up that says that the Windows Firewall is disabled. I click on the button to turn it on and then appears a screen that says "Security Center may depend on Windows Firewall." I then click "Activate Windows Firewall manually." Then he said that he does not use recommended settings to help protect my computer. I click "update settings now" but then he said he was unable to make the requested updates.

  I'm using Windows Vista and I have had my computer for a year now. It happened the other day and I installed as my Symantec anti-virus program.

  How can I activate Windows Firewall again?

  De :  Engel

  You can try this:

  Right click on command prompt (start Menu\Programs\Accessories) and choose Run as administrator. Type (or copy and paste) the following command:

  WinMgmt /verifyrepository

  If the system returns "referential WMI is not consistent", type this command:

  WinMgmt /salvagerepository

  The first time you run this operation fails. (It will be matter of commands to stop services causing his failure, saying: "a shutdown command was sent to a service that depend on other services running on"). It may take a few minutes for the services to stop. Rerun the last command. You may in fact need to run 3 times before finally runs and ends on its own.

  Another response of the community of Windows Vista discussion groups

• My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

  How can I solve unless I need to have this problem to download protection software.

  Hi Octavia10,
   
  -What version of service pack of Windows XP you are using?
   
  Try the methods listed in the given article to resolve this problem:
  You cannot start the Windows Firewall service in Windows XP SP2
   
  Note: The steps are applicable to the other version of Windows XP as well.

• Windows Vista - my Firewall does not illuminate

  I have Windows Vista. Recently, I turned on my PC and a pop up came to say that my firewall is turned off, I tried to click on it to turn it on and it did not work. I found this site and someone with the same problem and I tried the advice that was given and which was

  Right click on command prompt (start Menu\Programs\Accessories) and choose Run as administrator. Type (or copy and paste) the following command:

  WinMgmt /verifyrepository

  The only problem was my returned system as "referential WMI is in line" and now I don't know what to do because it is always disabled.

  Virus protection I have is the free AVG 2011. If anyone can help me that would be great, thanks!

  Thanks a lot for the quick response. I wish I had better news. I tried the Middle service and clicking on a started, but he said that if I went with the second option and I got error 1068: the dependency Service or group could start.

  I don't know what else to do. Help is much appreciated, thank you very much!

  Please do a check of the file system. See if the application is just bad files and if she can fix them.
  If it detects wrong files and cannot repair it will therefore also say at the end of the file check.

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I need help, its frustrating me! network discovery does not illuminate.

  my network discovery does not illuminate. Whenever I try to turn it on I get an error message that says: (the specified service does not exsist as an installed service)! I need to elp, its frustrating me! I have windows vista.

  Hello

  Did you change your computer?

  Method 1:

  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  1. click on start, type firewall and then click Windows Firewall with advanced security.
  2. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP) - in the list.
  3. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  4. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  1. Click Start, type services.msc and press to enter.
  2. from the list of services, double-click the service computer browser and TCP/IP NetBios support.
  3. change the startup type to automatic and start the service.
  4. apply the changes.

  Method 2:

  Now we go ahead and try to enable the discovery of the network on your computer and check for the issue.

  Network discovery is disabled by default for public networks. Changing a network location type to home or work is the best way to turn on network discovery. To learn how to change a network location type, see Choosing a network location. To enable discovery manually, follow the steps below.

  To turn on network discovery

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow button expand the section, click turn on network discovery, and then click on apply. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I also suggest you turn on discovery of the network link and check.

  Enable or disable network discovery

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-network-discovery

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?

• iMAC does not illuminate

  MY iMAC, which is several years old does not illuminate

  Take the test/diagnosis. Nobody here can 'pull' hardware problems.

  Barry

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.

  

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• Toshiba 40 L 345 * DB does not illuminate

  Hi guys,.

  I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

  Any thoughts?

  Rgds

  Kedders

  Originally posted by Kedders
  

  Hi guys,.

  I wonder if someone can help me. I have TV model, above, that does not illuminate. His age of only 18 months. the power switch flashes between grreen and Red intermittently every seconds.

  Any thoughts?

  Rgds

  Kedders

  Hi Kedders,

  I just encountered the same problem. While watching the TV, it shuts down suddenly. Even model & 18 months and now dead. If I leave it plugged in now, we get the same thing - the power switch flashes between green and Red intermittently seconds or - but no picture at all.

  What's wrong?

  Kind regards

  Chris_UK

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?