Re: Error Dell Vostro 200 - at startup: "Windows XP cannot start."

Similar Questions

• Dell Vostro 200 beeps twice at startup, does not start

  I have a Dell Vostro 200 desktop computer that has started to beep twice when turning on/off, but it does not start and nothing appears on the monitor. Can someone tell me how to fix this, please?

  rsiboise

  Two * beeps * indicate a problem of memory, first try to open the case and remove and reinstall all memory modules and see if that makes a difference, troubleshooting procedures more can be found in the Vostro 200 Mini Tower Troubleshooter HERE. NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Bev.

• Can I change my motherboard? I have DELL VOSTRO 200, CORE 2 DUO. My motherboard is FOXCONN G33M02

  Hello

  Can I change my motherboard? I have DELL VOSTRO 200, CORE 2 DUO. My motherboard is FOXCONN G33M02; My SERVICE tag IS 9WRYJ3J.

  Kind regards

  Hello

  Check with the support of FoxConn and they can tell you if it is compatible. Also
  Check their documentation online with Dell Support, and ask in their forums.

  FoxConn support
  http://www.foxconnsupport.com/default.aspx?language=en-us

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  Check with a store of the local computer (one that makes his on in-shop maintenance) would be
  be a good idea.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dell Vostro 200 Slim Tower - for SSD Samsung 850 Evo BIOS settings

  Hi - I am looking to replace the HARD drive in my Dell Vostro 200 Slim Tower with a Samsung SSD of 850 EVO.  I am running the BIOS 1.0.16 and do not see the option AHCI, RAID or IDE only.  Should what BIOS settings I use to optimize the performance of an SSD benefits?

  Thanks in advance for the help!

  I could get my SSD working under RAID (10 Windows) with the following steps (which some may not be necessary).

  1. MiniTool Partition Wizard Bootable 9 CD to clone a copy of the existing for the Samsung SSD HDD (Samsung data migration tool did not acknowledge the Samsung SSD on Windows 10, even though Device Manager it identified as such).  It took nearly 36 hours to clone froma 160 GB 250 GB HDD to the SSD.
  2. Replace HDD with SSD and it started / worked as an IDE drive.  TRIM has been activated and works.
  3. Apply the hotfix to the register noted in the first post of this thread (it may or may not be necessary):
     1. http://forums.HEXUS.NET/motherboards/112584-how-enable-AHCI-RAID-mode-without-reinstalling-Windows-P35-ICH9-ICH9R.html
  4. Downloaded the Intel Matrix Storage Manager 7.5.0.1017 A00 (which is appropriate for the Vostro 200 Slim Tower) from the Dell Web site and run the extracted exe file on the disk.
  5. Opens the folder where the drivers have been extracted and made a right click > install iaahci.inf and iastor.inf files.
  6. Restarted the PC, went into the BIOS and changed the IDE in RAID mode.
  7. When the system is booted, I received the message "Inaccessible Boot Device", so I let the system automatically restarts, go through the automatic recovery/repair options, then follow the guests to launch the advanced Windows options recovery to start in safe mode.
  8. Once in safe mode, I opened the Device Manager, which now showed the following new features:
     1. Disc players
        1. SAMSUNG SSD 850 EVO 500G
     2. Storage controllers
        1. Intel(r) ICH8R/ICH9R SATA RAID Controller
        2. Microsoft storage controller
  9. The system is then able to start and be used normally.
  10. There are still problems with the Samsung Wizard software, but it seems that it is a matter of Samsung.

  Hope this is useful to someone.

• (Redirected) The Dell Vostro 200 upgrade

  Hello, I'm tough in the hardware and software but also to this news.

  I recently bought a Dell Vostro 200 mini tower of Craigslist. Its running Windows 7 Ultimate edition. Here are its specs:

  Intel (r) Pentium (r) Dual CPU e2140 1.60 GHz

  2.00 GB of ram

  64-bit operating system

  the memory of disk hard 80gig and I installed a 250gig memory him

  has a graphics card Intel (r) G33/G31 Express chip on the family set

  I need advice, recently couple of my friends and I have decided to do some projects of video for you tube. I tried to download some apps, but they would not work... I want to use this desktop computer for video editing and games of causality as emulators!

  Need me a new graphics card and what is good? What kind of Ram do need me?

  looking for good performance with an economic budget

  Thank you very much for taking the time to read this and a helping hand!

  Hi AstrellaEspada,

  Please repost this in the laptop computer forum for assistance.

  http://en.community.Dell.com/support-forums/desktop/

• (Redirected) Dell Vostro 200

  I found this processor: processor Intel® Pentium® E6600 (2 M Cache, 3.06 GHz, 1066 MHz FSB)

  Is it compatible with my dell vostro 200 mini tower?

  I have card mother foxconn G33M02.

  Thank you!

  Hi Genisis.reloaded,

  If you please repost in the forum material office, General support more expert.

  http://en.community.Dell.com/support-forums/desktop/f/3514

• Dell Vostro 200 Mini CPU Fan upgrade

  Does anyone know what kind of CPU heatsinks are compatible with G33M02 motherboard that comes with a Dell Vostro 200 mini tour. The fan makes a lot of noise and I wanted to buy a replacement.

  Kuranado

  You need Reference Dell #JY167

  https://www.discountelectronics.com/product?product_id=3362&Product_Model=104

  Bev.

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Dell vostro 200 2nd hard drive

  Currently, I am trying to upgrade my son vostro 200 slim with more memory and 2nd hard drive. What I have to buy exactly.

  I see on here some people claim you can buy the screws and some people need a cable or two. Before I open, I want to make sure I have all ready.

  In addition, this drive would work?

  http://www.4AllMemory.com/product/detail/Western-Digital-caviar-green-WD10EARS-1TB-SATA2-64mb-power-saving-hard-drive/2521768/

  If someone could give the recommendation on memory, it would be much appreciated.

  Thank you.

  bluekiwi2012

  The WDC 1 TB SATA2 hard drive shown in your link will be fine.

  You'll need four Dell Hard Drive mounting screw [p/n WN322], they can be purchased from spare parts, Dell, HERE the ADMIN NOTE: broken link has been removed from this post by Dell >

  SATA data cable is necessary, but it should already be a spare power connector inside the case to a second hard drive.

  The installation of an additional SATA hard drive is HERE the NOTES of the ADMIN: broken link has been removed from this post by Dell >

  One of the best suppliers of memory is www.crucial.com, their memory is certified to be compatible with your system providing you use memory Advisor is Crucial, or scan of the system.

  Bev.

• In XP, error at startup 'Windows couldn't start. A recent hardware or software change might be the cause.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.

  2. choose your language settings and thenk click 'next '.
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  State 0 xC0000001
  Info: The selected entry could not be loaded because the application is missing or damaged.

  But, instead of file: \Windows\system32\winload.exe I get file: \$Windows.~BT\windows\system32\winload.exe.
  

  Hi imranhussain1979,

  ·         You have made any changes recently?

  ·         When it was working fine?

  ·         You have Windows XP or a later version of Windows?

  Step 1: The error seems to refer to a later version of Windows. Restart the computer and check if the installed operating system.

  Step 2: Try to start the computer in safe mode and check the number.

  Start your computer in safe mode

  Microsoft Windows XP: start the computer in safe mode

   

  Respond with more information so we can help you best.

• Card graphic upgrade in Dell Vostro 200

  Hello

  I plan on upgrading the graphics card in my Vostro 200. I'm looking for something relatively good for games but not too expensive (> £100). I don't really know what about this area does someone at - it suggestions as to whats compatible/good?

  Thankee very muchly

  
  

• Dell Vostro 200 won't turn on

  I have a Vostro 200, works pretty well, however I had to unplug it to move furniture, and when I plugged it to the switch does nothing. There is the device that the green light on the power supply unit lights up green, I tried unplugging for awhile again and plugging, but although the green light appears, the power button does nothing, I opened and checked connectors, nothing is loose and the motherboard indicates a light orange so it becomes current. I am at a loss. Help, please

  Note: I had this problem once before, but when I came back the next day and pressed the power button it turned to the right with no recurrence of the problem that now 5 months later

  Hi Kiwi cone,

  Unplug the PC, then press and hold power for a few seconds. Then plug it back in and see if it boots.

• Get the following error on reboot of the computer: Windows did not start because of a configuration of the disk of the computer problem

  Original title: where can I download iso windows xp recovery CD

  I have a file.which damaged boot.ini file later, when I restart it could not start, with the message:
  Windows did not start because of a configuration of the disk of the computer problem.

  Could not read from the selected boot disk. Check the hardware path and startup disk.

  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  So I need an iso file XP Recovery.
  I can simply copy the iso files on USB and start with usb?

  Hello

  1. don't you make changes on the computer before this problem?

  First I suggest you try the troubleshooting methods provided in the following article and the check if that resolves this problem.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477

• Windows 7 - "cannot start service Windows Security Center" aka WSCSVC. Error 1075

  Set indicator important message...

  "The Windows Security Center service cannot be started.

  This happened after I was deleting my WINDOWS 7 malware/virus. I open "SERVICES" went to the CENTER of the SECURITY in respect of services and a click with the right button on the name WSCSVC or attempt to start the service, following the verbosed of error/warning:

  "Windows failed to start the service on Local Computer Security Center.

  "Error 1075: the dependency service does not exist or has been marked for deletion.

  I think this may have had parts removed by Hijack, Anti-Malware, TDSSkiller, gmer, Housecall or ComboFix when I get rid of my system from Malware/Trojan/virus. With the exception of the Security Center, my system is now working well.

  The WSCSVC registry may have been deleted and the residue in the capture instant/backup/restore points. I know This is a very important function to have running, as it monitors your safe; Firewall, antivirus, UAC, Anti-Spyware and updates, etc.

  How to restore this program back to its normal state of operation, even if there are no backup? IE (manually enter the information in the registry?

  I'll be somewhere pointed to download the replacement program? Perhaps out of the installation DVD WIN7?

  Are there other ways as an option to solve this problem? Perhaps, another Member of program state and remove the remains of Security Center?

  Thanx

  In any case, this might do the trick: http://www.winhelponline.com/blog/error-1075-when-starting-the-security-center-service/

  Note: I know it's for Windows XP, but the same steps will apply to a Windows 7 computer running.

  Itknowledge24.com

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft