Re: I'll be able to install a new graphics card in, h8-1070uk Pavilion Desktop PC.

Similar Questions

• I'll be able to install a new graphics card in, h8-1070uk Pavilion Desktop PC.

  I bought this computer around September/October time last year. No get hurt, the computer is AMAZING, but I can't put up with an integrated graphics card (NVidia GeForce GT545 / 3GB is the default that comes with the system). So my question as I am able to change my graphics card? I have a GTX ready to go GB 680.

  Here are the specifications of your desktop HP Pavilion HPE h8-1070uk. According to the specifications, the motherboard has integrated Intel HD 2000 / 3000 graphics (depending on model) and supports PCI Express x 16 graphics cards. Your system was shipped from the factory with a PCI Express x 16 3 GB NVidia GeForce GT545. In addition, specifications, your system is equipped with a 460 Watt power supply. All the GTX680 I watched require power minimum system assessment of 550 watts or greater. So, Yes, you can replace the GT545 with a GTX680... simply put to the power supply as well. Corsair CX600 is slightly larger than a stock HP power and is highly recommended, but also a favorite forum. For more information, read Guide of Big_Dave of a discrete video card selection .

  Frank

• Is satellite A10 - possible to install the new graphics card?

  Hello

  I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.

  I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.

  I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.

  If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.

  the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?

  Thank you

  HI Jeff,

  In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.

  At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.

  In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.

  http://www.OmegaDrivers.NET/

  Kind regards

• HP compaq dc5800 sff: install a new graphics card

  Hello

  I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel.

  How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself.

  I read somewhere that I first need to uninstall the drivers from the chipset, q33 before putting the card in my pc, is it true? If Yes, how should I do it OK?

  If not, can I just put it in the case, plug in my monitor inside and start the pc, then install the drivers from the disk?

  Thank you

  Hello

  It is very rare that the removal of the existing video driver is necessary before installing a new video card. Most video card manufacturers do not understand such a suggestion with instructions to install a new video card.

  However, if you still believe that you must work Yes, so that you can go through the program and features Control Panel to remove the video driver only. You can also use Driversweeper to clean up the video driver.  However, before removing the Chuck, make sure you have the original drivers downloaded to your desktop so that you don't have to hunt for him later if necessary.

  The AMD R7 240 does not yet in your PC according to the level of brand, model and vBIOS in the graphics card.  In addition, check power supply required for the 240 R7 which, from what I've read is 400 watts.

• My machine will be able to handle a new graphics card?

  Hi all, first time here and really know what was going on inside my PC...

  I have a HP Pavilion slimline s3644uk, as he came out of the box, hardware wise.

  Windows Vista 64-bit, home premium SP2

  AMD Phenom 8250 triple core processor 1.9 Ghz

  4 GB of system memory

  The graphics card is a Nvidia GeForce 9300 GE, with the latest drivers installed

  My Question:

  I would like to run some (not new) stretegy games - Civ5 for example, but even that does not work smoothly or at all unless I turn off some of the most demanding in the features of the game. I guess it's the graphics card that holds me back, as if it isn't that new, I would have thought the PC itself has been up to, and anyway, I can't afford to replace.

  Yes, 1) do I need a better card, or the pC is not as good I think?

  (2) will be this system handle / stand a better card (it's a small enough case, the slimline...), or should I just wait until I can afford a new PC.

  (3) If Yes, what is the best card I can reasonably treat - didn't need to be sharp. I receive a techie to install for me, that wouldn't have a scoobie how myself.

  If it is relevant, I'm in the United Kingdom.

  Any help gratefully received

  See you soon

  Leon

  Your power supply is rated at 160 watts, which is on the low side for upgrading your graphics card. I tried to look to the top of the graphics in the HP slimline computers recent cards and their power supplies are rated 220 watts. You may be able to use a new graphics spec'd HP but very likely detail maps do not work.

  Frank

• Computer does not start after installing a new graphics card

  I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.

  System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.

  Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me.  Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:

  1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?

  2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011.  And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?

  In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.

  Hello @Eric_Z,

  I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.

  Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:

  • A PCI Express x 16
  • Three PCI Express x 1 connectors
  • A PCI Express Mini Card x 1

  As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.

  Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.

  I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.

  I hope this helps. Have a great day and thank you for display on the HP Forums!

• Install a new graphics card

  I tried to install a new amd (sapphire hd 7950) to my computer hp p6-2083sc. I couldn't do it because of unseemly threads. Is it possible to get these two together?

  the page for AMD:

  SAPPHIRE TECHNOLOGY Radeon HD 7950 - 3 GB GDDR5 - PCI Express 3.0 (11196-00 - 20G) | Pixmania UK

  Here are the specifications of your desktop HP Pavilion p6-2083sc. According to specifications, HP power supply is rated at 300 watts. SapphireTechnologies website of the graphics card Radeon HD 7950 3 GB DDR5 has these minimum system requirements;

  PCI Express® based PC is required with a X 16 channel available on the motherboard graphics slot.
  Power supply PCI Express 6-pin 4 x 75 Watt is required for CrossFireX™ system.
  Power supply PCI Express 6-pin 2 x 75 Watt is necessary.
  Certified power supplies are recommended. Please refer to: http://support.amd.com/us/certified/power-supplies/Pages/listing.aspx
  1024 MB Minimum of system memory.
  Installation software requires CD-ROM drive.
  DVD playback requires DVD drive.
  Blu - Ray™ / request for reading HD DVD Blu - ray / HD DVD player.
  To support 3 displays, one of the monitors must support DisplayPort.
  500-watt power supply is necessary.

  Your power supply does not meet the requirements in bold above. You need to upgrade food at a minimum of a 500 watt unit. The Corsair CX500 and CX600 are highly recommended and are known to adapt to most HP consumer computer cases. Corsair power supplies also have the necessary power ratings and PCIe power connectors.

  Please send Bravo

• NO SOUND! Install the new graphics card and now I have no sound

  Tried the other recommendations.  Looks like Nvidia tood on realtek... Yet when I click on says playback devices... NO AUDIO DEVICE IS INSTALLED

  Installed a PCle Verto GeForce 210 PCI Express slot on the motherboard.

  Windows Vista Edition Home Premium

  Compaq Presario SR5000

  UPDATE-uninstalled realtek and Nvidia now appears in reading... said devices his work... but not sound.

  I have it!

  You BIOS must be changed by self on "ENABLED" in the sound section of the Advanced tab.  F10 on my pc to access the configuration of the system when the first light.

• install the new graphics card

  I just bought the Skyrim game and want to play on an old PC.  I don't know what product I'm looking, maybe a new diet, but also a graphics card.

  Here are the details... hope this is enough information:

  HP Pavilion A6403W

  Windows XP

  Intel (R) Pentium (r) Dual CPU

  E2160 @ 1.80 GHz

  1.80 GHz 1.87 GHz of RAM

  Motherboard: Asus A8AE - THE

  PCI BUS

  250w PSU

  From what I read it is open 16-bit PCI location

  All advice and/or the name of the specific product would be greatly appreciated.

  Thank you

  Hello

  Look over hererecommended system configuration.  Your PC adapts to the minimum but not the recommended configuration.  Even in this case, you'll need a big discrete video card and a new PSU power supply.  If the game works even evil would then require more memory and a faster processor.

  The adjacent slot on the PCI-E x 16slot must be vacant.

• How to install the new graphics card due to the absence of HDMI Port

  I have an old laptop, and I want to connect it to my HD TV. Problem with that is that I don't have an HDMI Port. I noticed on a similar question that you responded that it might be useful to consider the insertion of a new graphics card. As I have never opened a laptop before, I was wondering if it is fairly simple to do this, (as anyone who could do it) or if I'd rather pay someone to do it?

  You can use something like this:

  http://Aluratek.com/USB-to-HDMI-1080p-adapter-with-audio

  or Google "USB to HDMI" of many other and different price ranges. Don't forget to look at the comments of consumers before buying something like this. They all promise of greatness, but I'm sure few deliver.

  SC Tom

• Windows 7 Installation stuck after installing new graphics card

  Before that, my office is fully compatible with Windows 7, but after that I installed a new graphics (ATI Radeon HD 5450) I can't install Windows 7, when I started to install that everything seems fine, but after it restarted and end Installation it just stuck there!

  Any help?
  I tried to remove the new graphics card and the use of the onboard graphics to install Windows 7 still does not work?
  NOTE: I used Windows XP before installing the new graphics card.
  I'm using Acer Aspire M1800
  CPU: Intel Pentium E6300 processor
  Memory: 2 GB DDR2
  Help appreciated
  -Joey

  Hello Joey

  If right now you go back to Windows XP and the system is slow correct? You have the drivers installed since you went back to XP? If not then click here and select your system. This will bring up a list of available drivers for you. Also, I've included a link below to get the drivers for your new video card. My problem with the question is if your system has enough power to support the video card. Here are the specifications of your card. Check the configuration required for the map and you ensure that you have adequate food. Let me know if it helps. Thank you.

  ATI Radeon HD 5450 Windows XP Drivers

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• No sound after installing new graphics card

  Original title: sound problems, this can be confusing abit.

  OK, so today I have installed a new graphics card, NVIDIA, comes with 2 VGA Plug ins and a MiniHDMI.
  Once I installed it, my sound thing said, exit No Audio is installed, so I reinstalled it, but for some reason any... He sends the sound via HMDI cable, but I did not! I used to have "Realtek HD audio", so I went on the website to download, got one, but has no effect! Please help me!

  Too bad... It's okay now, thanks anyway, I got it to work.
  PS, I never siad anything on an error message.

• GarageBand wasn't able to install the new sounds

  I'm under GarageBand 10.1.2 & OS X El Capitan 10.11.6 on a Macbook Pro 13 retina "(2016).

  A couple of weeks, that I have installed additional drummers with no problems. I noticed, however, that many of the sounds in the sound library had an icon to download next to them; so I went to the GarageBand menu, option "Sound Library / download all the available sounds" and they begin to download immediately. Most of them have installed fine (and is still usable), but at some point the download has stopped and a window appeared with the message "GarageBand wasn't able to install the new sounds. Close and re-open GarageBand to download and install again. »

  Since then, whenever I open GarageBand, downloading continues automatically, but after a few minutes I get the same annoying message.

  I searched the Internet and tried all the following without success:

  (1) closed and reopened GarageBand

  (2) given in market system

  (3) delete the folder "/ private/var/folders/lq/nb_0wt4d1zq5rs933745flww0000gn ' and all its contents

  (4) remove the "user/Library/Caches" folder and all its contents

  (5) the latest version of Java from Oracle (update version 8 101 - build 1.8.0_101 - b13)

  I always feel the same frustrating lock when I open GarageBand (download starts and after a while it stops and the error message shows up again... and again once).

  I've included some screenshots on this post below, which illustrate the issue.

  Thanks in advance for any help you can provide me with!

  

  

  Just to be sure - you have enough free storage to install all the new sounds? The instrument only GarageBand library has 14GB on my Mac.

  Until you try to install the sounds still launch the Console application and look for messages of diagnosis in the Console, when GarageBand gives the error message.  Are there clues, all messages associated with GarageBand in the Console window?

  Sometimes third part applications or incompatible system additions could cause this kind of problem, as firewall and antivirus software, for example, Little Snitch or Kaperski. If you have any of these installed, disable it before attempting to download the software.

  To prevent the non-standard extensions system to interfere, restart the Mac in Mode safe, before you try to install again, see: try safe mode if your Mac does not commissioning - Apple Support

• Pavilion HPE - 533 sc: installed new graphics card. Hard drive stops

  In order to improve my graphics performance for games that I invested in this graphics card:

  NVIDIA gtx 950, links shows the map and specifications:

  http://gadgetsngaming.com/2015/08/21/nVidias-GTX-950-at-160-easily-beats-750ti-in-1080p-gaming/

  How fitting the screen stops at initial HP logo and "press ESC to start menu.

  I can also clearly see that disk hard fails or starts the Windows 7 Edition operating system home premium.

  I am running Nvidia GT 630, and back on this card machines works well again.

  It just loks like the new graphics card prevents the hard drive to run.

  All attached cables (power cable 6 pin) and locked firmly into the PCI slot.

  Is it possible that the new card draws so much power that it prevents the hard drive of the race?

  When you press ESC, it seems that the hard drive is registered in the Bios.

  This nvidia gtx 950 is better? It seems to be more the size of the one I have - nvidia GT 630. Link shows specifications.

  http://videocardz.com/NVIDIA/GeForce-900/GeForce-GTX-950

  *

  First of all try to help me, please do not write that I should get a new machine - I thought that, despite this current have worked without any problems for 5 years now.

  Do not forget that I have to install a lot of programs and to transfer other data - it would be nice to avoid this.

  If if can not be fixed - which stationary HP desktop computer (I have a laptop) can have the new nvidia gtx 950 mounted?

  http://store.HP.com/us/en/PDP/desktops/HP-envy-Phoenix-810se-desktop-j6n64av-ABA-1

  or this

  HP Pavilion Desktop-500-585no

  Thanks in advance

  I'm not familiar with current PC for sale, regarding upgrades.  Since is considered a new HP, try looking at the list of options on the HP website.  Most higher end PC have the options that you choose before buy you, to customize the generation.  Choose a model with options that match your criteria now and notice the upgrade options - write down them - to avoid confusion later.  OR go with a customized version, but this could mean significant spending.  It is the hand off the coast between prebuilts and personalized.