Re-installation of 98. floppy drive and the CD Player do not work
Hello
I loaded 98 in our 3410 CT. 98 is installed, but the system has not picked up on our floppy (usb) and our cd. I know I have to get the drivers here, but how? The cd will not work because it has no driver present as is the case for the floppy drive. The boring bit, is that I have the driver on a separate disk. Any body has any suggestions.
See you soon
Carpet
[Edited by: admin on 26 June 05 20:52]
Hello
I'm not 100% sure here, but I think you can resolve your situation by enabling legacy mode USB FDD in BIOS (if not already done), and then boot from a drive to floppy BACK/Win9X and then copy the drivers to the HARD disk.
Try this:
-Turn on your 3480 but look out for the Toshiba logo!
-When you see the logo very quickly press the ESC key several times (normally just 1 time will do, but that's if you know just WHEN to press it).
-You will receive a message saying PRESS F1 key... Do this.
-You are now in the BIOS. Look for a setting that says something like "Legacy USB FDD mode". Set it to "Enabled".
-Also look around to make sure that the boot priority is set to FDD as first boot-unit.
-Save the settings by pressing END, then answer Yes to the question "are you '.
-To get a bootable BACK / Win9X floppy. Insert into the disk drive and start the machine from him.
-Now manually copy the floppy drivers (unzip it first!) the floppy drive in a temporary directory on the HARD drive.
-Copy the drivers (2 versions exist) and the driver on the CD while you're there.
-Reboot, start Windows and enter the Devicemanager to update the missing drivers from the temp directory.
TADA!
Good luck!
Tom
Tags: Toshiba
Similar Questions
-
Windows Media Player
No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not workReset the WMP.
Step by step instructions are given here: -.
-
HP Pavilion DV6 DVD disc not recognized and the media player does not work
My HP DV6 is having... issues. Windows 7. A little history:
Recently (2 months ago) he quit the installation of the updates of Windows and would download 3 whenever I stop. HP support could not help or Fix - It programs work. Had to restore it to factory default and that solved THIS problem.
Reading card camera (which I have done before) attempted recently, but he did not read / was not recognized. Today, tried to launch a DVD, and when it does not start automatically, I discovered that it is not recognized.
Tried HP Support Assistant, who told me that the model # of the DVD drive that I was using, then proceeded to say there was something wrong with the driver... and he couldn't fix it.
More? (Windows Explorer, not Internet) will be often expire or crash...
I have Norton Internet Security with live update and have yet to have virus problems.
Any help or questions greatly appreciated!
To resolve this problem, remove the affected filter drivers. To do this, follow these steps:
- Click Start, type regedit in the Search box, and then click regedit in the programs list.
If you are prompted for an administrator password or a confirmation, type your password, or click continue. - Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
- Click Start, type regedit in the Search box, and then click regedit in the programs list.
-
I have a Hp and the micro build does not work how to fix this?
Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?
Hello
Check with HP, their drivers support and documentation online and ask in the forums about known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/========
It's probably the pilots who are responsible and who may not really be later or they need to be
re-installed anyway. The best way is to manually review using the methods below.References to Vista also apply to Windows 7.
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
Audio definition (this is an example and you can have an other name/maker).Write the description and the model double click on it - tab drivers - write down
Version. Now click on update drivers who cannot do anything as MS is far behind certifying
drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
stack.You can have the default windows or a former certified pilot and it's all or part of the
issue.Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
where you put - right-click on Reboot - RUN AS ADMIN-Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
operating mode. Download - SAVE - go to where you put them - click on - RUN AS
ADMIN - RebootLook at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDTips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsThe volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
in Windows XP (or Vista)
http://support.Microsoft.com/kb/973446I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title:. Nothing works.
All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.
Safe mode?
Looks like you have a virus/trojan/worm infection pretty good...
Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility. Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.
-
I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed. I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation. I get a message that says I need to activate Windows, but he says that the product key is not valid. How can I fix it?
Thank you
If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.
You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?
If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.
However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.
This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.
-
I had to replace my hard drive and now my key does not work
I had to replace my hard drive and now my key does not work, it keeps giving the error 0xC004E003
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-usActivation error: 0XC004E003 http://support.microsoft.com/kb/938450
Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
http://go.Microsoft.com/fwlink/?LinkId=52012 -
volume and the touch screen does not work
good so we got our a Vulcan mod VTA1005XBM32. Will be that she locked her self so we had reset his tab/pc, but know its volume and the touch screen does not work. see some convo saying to download something, but I don't really know what to look for. Help, please... Thank you Dorothy
OT:
my / Tablet PC
Dorothy salvation,
Thanks for posting your query in Microsoft Community.
I don't understand that the volume and the touch screen does not work and I'll be happy to answer your query. These features require the updated drivers for them work. Let me ask you;
- When was the last time that the two have worked?
- Remember to no particular change in the device before the show?
- Since the touch screen does not work, you are able to use the options settings?
The device requires the updated drivers for the volume and the touch screen. I suggest to follow the methods below and check.
Method 1: Run the troubleshooter of material and check if that helps.
a. type in the right edge of the screen, and then click Search.
(If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)b. enter Troubleshooting in the search box, type or click Troubleshooting, and then press or click on hardware and sound.
c. press or click on hardware and devicesand follow the instructions on the screen. You may be prompted for an administrator password or to confirm your choice.
Method 2: Update the drivers
Step 1: Update the driver through Device Manager
a. press the Windows key + X , and then click Device Manager
b. expand driver Sound
c. make a right click driver, and then click Update driver software
Step 2: Install the Windows updates pending
To check the updates:
Open Windows Update by hitting on any fly in the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.
Press or click check nowand then wait while Windows searches the latest updates for your PC.
If updates are found, tap or click install updates.
Read and accept the terms of the license and then press or click Finish if the update requires it.
Restart the computer for the updates to be applied.
Step 3: Visit the website of the manufacturer of the device support and install the latest drivers for the sound and touch to Windows 8 for the same model of aircraft.
You can also check: touch and pen settings: FAQ
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
Hello
I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
During configuration.
(1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
(2) in addition, I have selected to configure Oracle HTTP server as a web server.
These two steps were successful.
But shared services and the workspace URL do not work. We get a 404 error.
Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
Can someone please suggest a solution for this.
# < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
# < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
# < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
# < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
# < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
# < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
# < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
# < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
Thanks in advance.
TEJHi all.
Thanks for all your useful contributions.
Finally, the reconfiguration is successful.
Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.
Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.
Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.
Finally, Shared Services and the workspace URL work correctly.
http://servername:28080/Interop/index.jsp
http://servername:28080 / workspace /.
Kind regards
TEJ B
-
I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
- http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
- https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the database of places with this extension:
-
page up and down and the arrow keys do not work, they do on any other programs
Page up and down and the arrow keys do not work or jump at the bottom of page.
You may have accidentally entered mode 'Keyboard Navigation. The F7 key will toggle "Keyboard Navigation" on or off.
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
My Windows telling me that he needs 11 updates. These consistenly updates fail and the Microsoft fix did not work. Error codes are 641 and 80070641.
Hello
Did you change your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can follow the procedure in the article.
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018
Method 2
You can reset the Windows Update components.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryHow to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821Method 4
Step 1:
Place the computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Step 2:
You can manually download and install updates from Microsoft Download Center.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx
Method 5
You can disable temporary of your security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work
Hello
Thank you for your response.
I appreciate that you have attached a screenshot of the problem.
Have you tried troubleshooting of hardware and devices running?
Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows/back-up-registryI hope this helps.
Thank you
-
I forgot my password and the 'forgotten' paswword does not work
I forgot my password and the 'forgotten' paswword does not work
and he continues to insert the e-mail with account assosicate!
Hello
Perhaps it is that you have a SnapFish.com account. A large number of long-term HP customers have SnapFish.com accounts and don't realize it. One of the printer software frees customers signed up automatically, and most people did not know, or forgot, because they never used it. Try to go to SnapFish.com and using the forgotten password screen link it connection. Once you have reset the password, go to ePrintCenter.com and use the SnapFish.com log in information to connect. If this does not help, you may need to contact SnapFish.com directly to delete the account, or use a different email to record with. Another difficulty that I have met is actually recreate a SnapFish.com account, if SnapFish says no accounts exist, or no email comes, when you try to reset your password.
-
I try to install the update of PS CS6 can read files camera raw Nikon D800. The exe file fails and says trying to install the application manager. I did it and the update still does not work. Now what?
update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/
If this fails, attach a screenshot of the error message if it is in English. otherwise, quote it.
Maybe you are looking for
-
RAN TESTS PRINTER, THE PRINTER DOES NOT PRINT. WENT TO HELP FIXIT CLICKED ON DO NOT FIND ANY PROBLEM.
-
HP envy m6-1125dx: ssd msata on HP ENVY M6-1125DX
Hi HP! I am a customer who uses an Hp product, have a laptop model HP ENVY M6-1125dx. I asked about this hardware upgrade thing. My problem is that I see a mini PCI - Ex right next to my Wifi card slot, so I take a look at the manual and his told me
-
Original title: Fix it center fails. Difficulty Center fails with the error:Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failedI can't find the url of re - download.It doesn't seem to be at the Download Center.Thank youFra
-
The Task Manager window only displays running applications and without tab at the top of the window nor allow me to use the X th close the window. How to restore the window to its normal appearance?
-
Hi all I was wondering if anniversary field contacts should be automatically added to the calendar? I sorta expected be... on my laptop (NOT a product of webOS unfortunately) this is done automatically. Is this not implemented (yet), or y at - it a b