Re: keyboard in Tablet - spectrum mode

Similar Questions

• Yoga 2 Tablet Pro Mode extremely slow on win 10

  So every day a new problem with the Yoga 2 Pro and Win 10. After the reinstallation of Transition, the screen now. Yippee. But now in tablet mode performance is so slow it's unbareable. Anyone else with this problem? Thoughts?

  OK... seems that Lenovo service called YMC (via the Task Manager) completely disabling solves this problem with no negative effect. The service is responsible for disabling the keyboard in Tablet etc mode, but it seems that it is redundant in Windows 10 (maybe Windows control itself?).

  Disable, if it causes problems turn it back on.

• X 360 spectrum: spectrum x 360 keyboard died in portable mode, on Tablet mode

  new spectrum X 360, keyboard turns off when the form is opened in laptop mode and the keyboard when the screen is folded into tablet mode.

  This happens even if the bios (f10) or diagnostics (f2).

  Is there a way to reset the status of the keyboard depending on the angle of the screen or the orientation of the computer?

  @FelixCity,

  Hello and thanks for the display on the HP support forums.  If you encounter a problem connecting with the keyboard with your spectrum, it will be a hardware problem.  This happens because the corrector does not have a good enough connection.

  You will need to contact the HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• 700 Lenovo Yoga's the keyboard in tablet mode

  Hello.

  I would like to ask, is it possible to use the keyboard in tablet mode?

  I would use Yoga with an external monitor, but I read that the keyboard turns off automatically in tablet mode.

  Thanks in advance,

  Kuksss

  kuksss wrote:

  I would like to ask, is it possible to use the keyboard in tablet mode?

  I would use Yoga with an external monitor, but I read that the keyboard turns off automatically in tablet mode.

  You ask about the physical keyboard of the 700 Yoga help? In other words, you want to connect an external monitor, fold the 700 Yoga in tablet mode, place it on a desk with the keyboard facing up, and then use the keyboard/trackpad in combination with the display on the external monitor...?

  If that's what you want to do, I'm afraid that you are out of luck - keyboard/trackpad models Yoga is disabled whenever the Yoga is folded tablet, tent, or presentation mode. They only work when Yoga is used in portable mode. This is normal.

• Helix keyboard usable in tablet or modes of settlement?

  Sales said that the keyboard can be used even when the screen is detached. From my experience, the keyboard works only in portable mode. Is it possible to use the keyboard in mode stand or Tablet?

  The keyboard connects to the Tablet part via bluetooth or wifi, it is connected through the physical dock connector. So I don't think it would work when the portion of the screen is detached.

  I think that sales confuses the propeller ThinkPad and ThinkPad Tablet 2, which uses a bluetooth keyboard.

• HP 10 G2: keyboard Bluetooth tablet from HP G2 10 matching process

  HP 10 G2 Tablet keyboard Bluetooth pairing process Instruction:

  1. Make sure the usable keyboard (plug-in, light on: charging, light off: fully charged or do not connect)
  2. switch keyboard lights and then you can see the light for 3 seconds on
  3. Activate the Bluetooth Tablet (go to settings-> Bluetooth-> turn on)
  4. Press the 'fn' and 'bluetooth icon' keys at the same time, so you can see the LED on the keyboard flashes (pairing mode)
  5. Tablet will detect the keyboard Bluetooth (HP Bluetooth keyboard T1000)
  6. Click on the on-screen keyboard Bluetooth icon
  7. Bluetooth pairing request window will pop up
  8. type numbers 6 matching code that you see on the screen by using the keys on the keyboard case
  9. Press the Enter"" key.
  10. Tablet will pair with this keyboard you can use the keyboard normally

  Note: the keyboard will become inactive if pairing is not successful within 2 minutes, you must repeat the pairing process, if this happens. (step 4)

  1. Make sure the usable keyboard (plug-in, light on: charging, light off: fully charged or do not connect)
  2. switch keyboard lights and then you can see the light for 3 seconds on
  3. Activate the Bluetooth Tablet (go to settings to turn on Bluetooth)
  4. Press the 'fn' and 'bluetooth icon' keys at the same time, so you can see the LED on the keyboard flashes (pairing mode)
  5. Tablet will detect the keyboard Bluetooth (HP Bluetooth keyboard T1000)
  6. Click on the on-screen keyboard Bluetooth icon
  7. Bluetooth pairing request window will pop up
  8. type numbers 6 matching code that you see on the screen by using the keys on the keyboard case
  9. Press the Enter"" key.
  10. Tablet will pair with this keyboard you can use the keyboard normally

  Note: the keyboard will become inactive if pairing is not successful within 2 minutes, you must repeat the pairing process, if this happens. (step 4)

• Portege Z10t - A keyboard disconnects using portable mode

  When you use the tablet in portable mode, occasionally the keyboard seems to disconnect properly said, so that nothing works.

  Only way I can find to turn it back on is to disconnect the Tablet then plug it back again.

  Is there any settings or updates etc. for this?

  see you soon

  Thanks for the comments. Test please firmware and view the results. It will be interesting to know if the problem will be solved.

• 2 13 Yoga do not disable keyboard when switching of modes tent/booth

  Hi, I just upgraded my Lenovo Yoga 2 13 10 Windows and the keyboard is not turn off as it should. It turns off in tablet mode, but not in the tent or booth, and it is a problem that I can not use stand as my cell phone goes haywire. In addition, notifications little don't popup when I change mode so I guess it's something to do with not having the app of transitions. Y at - it somewwhere I can download it and see if that's the problem?

  Thanks in advance

  Who has not worked for me, oddly enough. However this morning, I thought I'd try a few different things so finally I finished downloading the 2.0 software of Transitions for Yoga 2 Pro Windows 8 and that seemed to work. Weird, but it was designed for Windows 8 but well, it solved my problem.

• Spectrum x 360: 360 X keyboard STOP automatic spectrum

  Is it possible to prevent the keyboard put off when in tablet mode?  I would like to connect it to a larger screen and use the keyboard without having the device opened like a laptop.

  Hello @Phil646,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the problem of keyboard and wanted to help you!

  Unfortunately, I don't believe that this is possible.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• The satellite A range keyboard switches in command mode

  Help, please!

  My keyboard guard passage to a command mode, I might be typing a paper or just browse the internet and my keys will suddenly rise to orders instead of the keyboard.

  How can I stop this?
  Its a new laptop (2 months)

  > My keyboard guard passage to a command mode any
  What commands do you mean exactly?

  Does this happen with no posted special function mode key?

  What about the use of the external USB keyboard?
  This problem happens using this 2nd external keyboard too?

  The comments appreciated!

• Weighting of exponential power FFT spectrum mode

  In the spectrum power of FFT VI mode exponential weighting from the link:

  https://zone.NI.com/reference/en-XX/help/371361H-01/lvanlsconcepts/average_improve_measure_freq/#Wei...

  Weighting is applied according to the following equation.

  

  where Xi is the result of the analysis conducted on the ith block, Yi is the result of the average of X 1 XI, N = i for the linear weighting, and N is a constant for the exponential weighting (N = 1 to i = 1).

  For the exponential weighting, N is a constant. What is its value?

  Yes, but N = I do not mean that it is constant. For weighted linear N = i means N = 1 when I = 1, N = 2 when I = 2... And on average stops when I reached your set number.

  For the exponential weighting N is constant (the number that you define) that leads to an exponential weighting. The average never stops in this case.

• keyboard recognized only in Mode safe

  I am running XP SP3... .n a HP desktop computer

  A normal start, or a PS/2 or USB keyboard is recognized.  However, both are recognized in Mode safe. .

  I have a Logitek LX7 mouse that is working very well in Normal Mode as well. but no keyboard.  I ran THREE different cleaners on the system, the malware dectives, etc. etc.    I have uninstall/re-installed keyboard drivers then in Safe Mode and do not know what else to do?

  When in normal mode, the mouse works fine, but I can't do what-so-ever typing.

  It happened once before about two weeks ago.  But after a few days the re-boot it is normal again.

  I know that it is probably little corrupted code somewhere, but you can't FORCE the normal system to recognize material?:  I tried everything I know.

  I looked through the event viewer reports and you seem to have a staggering number of questions. It would be useful to know if you have Windows XP Home Edition or professional? Also do you have installed SP3?

  Type: error
  Date: 20/06/2011
  Time: 11:10:19
  Event: 1008
  Source: MsiInstaller
  Description:
  The installation of c:\WINDOWS\Installer\92b0f.msi is not allowed due to an error in software restriction policy processing. The object is not reliable.
  I not understand yet what this means.

  Type: error
  Date: 20/06/2011
  Time: 10:44:16
  Event: 10005
  Source: DCOM
  Description:
  DCOM got error "% 1084" try to start the service EventSystem with arguments "".
  to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  {1BE1F766-5536-11D1-B726-00C04FB926AF} is 'COM + Event System'
  service.

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Find event of COM + in the list system and verify that the startup type is manual (startup). If it is not set to manual (start) right click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Also, look for Remote Procedure Call (RPC) in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started

  Type: error
  Date: 20/06/2011
  Time: 11:02:39
  Event: 10005
  Source: DCOM
  Description:
  DCOM got error "% 1084" try to start the service StiSvc with arguments "".
  to start the server:
  {A1F4E726-8CF1-11D1-BF92-0060081ED811}

  This type of error, click on the Start button and select Control Panel, administrative tools, Services. Find Windows Image Acquisition in the list and make sure that the startup type is manual. If it is not set to manual, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started

  Type: WARNING
  Date: 20/06/2011
  Time: 10:37:21
  Event: 18
  Source: i8042prt
  Description:
  The device sent an incorrect response (s) after a reset of the mouse.

  I8042prt driver is the driver of keyboard and mouse PS/2.

  This link can help with keyboard / mouse prroblem
  http://www.EventID.NET/display.asp?eventid=18&eventno=1480&source=i8042prt&phase=1

  McAfee is a bad choice for your antivirus. There is a lot more suitable alternatives to freeware. Microsoft Security Esentials is commonly recommended to these forums. Personally, I prefer AVG 2011 Antivirus (FreeEdition). Withdrawal could remove some of the problems you have.

• Keyboard wireless and safe mode

  I can't start in safe mode because I have a wireless keyboard and it is not able to do anything until Windows loads. Pressing F8 doesn't do absolutely nothing.

  Yes, it is a common problem with some wireless keyboards. Connect a keyboard USB temporarily to solve the problem. You can get a USB keyboard base for very little money. MS - MVP - Elephant Boy computers - don't panic!

• BlackBerry keyboard Z10 in silent mode?

  Is there a way to always activate the sounds of keyboard in silent mode as you can do on the Bold 9900?

  No, you must be in the normal profile to get keyboard sounds.

• keyboard shortcut for blend modes.

  Hello illustrators.

  Im trying to give my blend modes with a keyboard shortcut, as in ps with the down arrow key they blnding fashions change.

  but the thing is that in the Control Panel keyboard shortcut, you can only have a key assigned to the short cut. for example, I just asigned the / to represent

  the shortcut for the normal mode, then I went ahead to re-branded even / to darken it mode but I pass a message that is all ready asigned to the normal mode.so, how can I optimize my sohrt cut mixture as ps mode using the donw arrow key. (the arrows down may not be assinged as a shortcut, it's another message)

  Thank you.

  You can assign a shortcut to "next blending mode" and "mode of previous merger. By pressing and then advance through the modes.