Portege Z10t - A keyboard disconnects using portable mode

Similar Questions

• Portege Z10T-a - keyboard does not

  Hello

  The keyboard of my Toshiba Z10 unresponsive.
  Tablet mode is fine.

  I have try the reset, restart, I installed the patch, nothing, battery recharges through the keyboard.
  Thank you for the support.

  Hello

  Hmm... usually the update of the firmware (patch) should help resolve this problem.
  I would give another thread on the same topic, and the update of the firmware was the key.
  http://forums.computers.Toshiba-euro...ThreadId=73148

  I also found that this doc from Toshiba in the knowledge base on the update of Firmware for Keybord Docker for Portege Z10t solve connection problems
  http://APS2.toshiba-tro.de/KB0/TSB3A03IV0000R01.htm

  But it seems that you have already installed the patch, but it didn't he not help you.
  So I think that there is a problem with the connection of the keyboard.

  You should get in touch with service Toshiba authorized in your country in order to verify the keyboard.

• Portege Z10t connect to projector using VGA

  Hello.

  I'm having a problem connecting the Portege Z10t to a projector via VGA.
  The amount of the fine by HDMI.

  Resolution changes to screen for something like a 4:3 ratio.
  Then, he goes on the projector, rest for about 10 seconds then bombs.
  I tried several resolutions but no joy. We are running windows 8.1

  I tried a few different z10t and different projectors. Other laptops running windows 8.1 are very well, it seems that with the z10t.

  Any ideas? Thanks in advance

  First of all, it would be interesting to know what resolution you ve chosen for internal and external display.
  The Portege Z10T series was equipped with different views, but as far as I know the max resolution supported for all the screens should be: 1920 x 1080 px

  If you use the extended desktop, two screens (internal + projector) could use different resolution, but if you use the clone poster option then the resolution must be the same on the Internet as well as on the external display (projector).

• X 360 spectrum: spectrum x 360 keyboard died in portable mode, on Tablet mode

  new spectrum X 360, keyboard turns off when the form is opened in laptop mode and the keyboard when the screen is folded into tablet mode.

  This happens even if the bios (f10) or diagnostics (f2).

  Is there a way to reset the status of the keyboard depending on the angle of the screen or the orientation of the computer?

  @FelixCity,

  Hello and thanks for the display on the HP support forums.  If you encounter a problem connecting with the keyboard with your spectrum, it will be a hardware problem.  This happens because the corrector does not have a good enough connection.

  You will need to contact the HP support by phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know how things are going.

  Thanks again for posting and have a great day.

• Portege Z10t - A PT132A goes to sleep after 60 seconds of noninteraction

  Portege Z10t-A PT132A-00F00T

  My Tablet continues to go to sleep after about 60 seconds of noninteraction.
  I can watch youtube, read, listen to music... etc and after about 60 seconds of me not to touch the display turns on outside and all the audio and video stop.
  As soon as I touch the screen it wakes up again.

  I was in the power options and retouched for the power supply and battery.
  I put Sun/Eve forever to the two options as a test, but still it does.

  I missed a place where it is defined elsewhere?
  Very annoying

  Thank you

  Post edited by: Jayp

  Hello

  Is it in laptop mode when Toshiba keyboard Dock is fixed or in tablet mode only?
  Is it if the adapter is connected or only when the adapter is removed?

  The computer will automatically mode 'sleep' according to the sin of setting power options. To access this click
  Office-> Office help-> Control Panel-> system and security-> power options options
  (or Win key + X-> power options)

  Here you should find the option called display auto power OFF
  This feature automatically cuts off the power to the screen when there is no input of keyboard for a while

  You can also see the hybrid sleep feature that appears also in Power Options.

  In addition, I recommend check you the settings of Intel Display Power Saving technology.
  This feature is enabled by default and controls the current consumption b< optimizing="" the="" picture="" contrast="" and="" internal="" lcd.="" this="" can="" be="" used="" if="" notebook="" is="" running="" in="" battery="" mode="" and="" using="" the="" internal="" lcd="" display="">

  To access this feature, he must right click on the desktop, and then click graphics properties
  -> Select battery from the drop-down list in the power source, and then click Power.
  Then, clear the checkbox display energy saving technology and lick OK.

• Change the SSD or RAM in Portege Z10t?

  Hello

  As we know that it is very easy to change the RAM memory or the Portégé R700-930 series SSD drive.
  It's a little more complicated for the Z series.

  I just wanted to know if this is possible for the new series of Z10t?
  The standard elements of 4G and 128G are a bit small for my taste.

  Thank you
  / Anders

  Hello

  I think the upgrade on Portege Z10T is another story and not comparable with other series such as Portege R700.

  The Portege Z10T is a mixture of Tablet / netbook device and mSATA SSD drive is placed within the tablet that is not upgraded to the user.

  If 128GB are not enough for you, you can insert and use the extra memory media into the SD card slot

• Portege Z10T-A140: can I make to Win 8.1 and where to find the serial key

  Hello
  I have Z10T-A140.

  When I check the part number in the link: http://www.toshibamea.com/en/Compatibility-Matrix-8-1?SerialNo=pt131v-00h005ar

  told me is not compatible with win 8.1.

  but to under writing the page, it is compatible with win 8.1.

  Why the result is different?

  Another question:
  I can't have my serial number of Windows 8 and I can only see last 5 digit number.
  If my clear HARD drive and I need full new install winodws 8, where can I find my serial number for Windows 8.1?

  Thank you.

  > Why the result is different?

  Your laptop is a PT131V-00H005AR Portege Z10T-A140
  Of course, it s 8.1 Windows extensible and taken in charge.
  On the page of supported Windows update 8.1 models, you can find the Portege Z10T PT131V.

  > Other my question:
  > I can't get my serial number of Windows 8 and I can only see last 5 digit number.
  > If my clear HARD drive and I need full new install windows 8, where can I find my serial number for Windows 8.1?

  I recommend reading the user manual. You will find information on the Toshiba Recovery Media Creator.
  The recovery media Creator allows you to create a recovery disk. This disc install again the image of Toshiba on the laptop. The serial key is not necessary because the Windows 8 will be activated automatically using Toshiba image.

• Impossible to type a few letters on the keyboard, even using several keyboards.

  Original title: G and H stickin,-this happens when I use you wireless but also laptop keyboard you

  It is a sample of wat appens wen I'm tryin to type. Started with the problem n bein you - I ran restoration and after awhile tat went and H (upper and lower case) become problem. Now G participated! Am ready to cuck laptop out the window! Spell checker does not always pick up missin letters cannot be used for work or even for the emails of the doin.

  Hello

  1. What is the number of brand and model of the laptop?
  2. are you having the problem with the keyboard while using applications or with a particular application?
  3. were there any changes made on the computer before this problem?

  Method 1:
  Check the link and try to run the Troubleshooter:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:
  If the problem persists I suggest to start the computer in Mode safe mode with network and check whether you are faced with the same question. If the problem does not occur in Mode safe mode with networking you perform the clean boot to find what service or startup item is causing the problem.

  Step 1:
  Start the computer using safe mode with networking.

  (a) remove all floppy disks, CDs and DVDs from your computer, and then restart your computer.

  (b) If your computer has a single operating system installed, press and hold the F8 key as your computer restarts.

  (c) you must press F8 before the Windows logo appears.

  (d) if the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  (e) on the screen Advanced Startup Options , use the arrow keys to select the desired mode safe mode with networking option and press enter.

  (f) sign in your computer with a user account with administrator rights.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:
  If the issue happen not in Mode safe mode with networking, try to set up your computer in a clean boot state and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:
  I suggest you to use the keyboard on the screen and check if it works. You can check the links
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  If you are able to type on the keyboard screen I would contact the manufacturer of your laptop for extra support.

  I hope this information helps!

• Can not leave completely insensitive - Firefox, use Safe Mode, reinstall or uninstall

  I installed Firefox less than a month ago. Two days ago, that he left suddenly during the navigation. This does seem like a problem, really - I thought I would just restart - but it REMAINS open. Shows the icon in my dock (on Mac), and the menu bar appears when I click on the icon. I can browse the menu selections but can not choose one.

  I can't:
  -Leave Firefox - from the menu or with Ctrl + Q
  -Open a new fenΩtre
  -Open help
  -Access to "troubleshooting information.
  -Select "restart with modules disabled...". »
  -Use the Safe Mode

  Because I can not use Safe Mode and cannot leave the program, I have IMPOSSIBLE:
  -Uninstall (it refuses to remove, because the program is 'open', as it won't leave)
  -Reinstall (I can't substitute the existing because the program is 'open')
  -Remove my dock
  -.. pretty much anything else.

  I've read many articles dealing with troubleshooting, Safe Mode, reinstall clean, etc, but unfortunately I can't make one of these because Firefox is open but completely insensitive.

  (PS - I tried to install the below troubleshooting information, but, even once, because Firefox is not responding, I couldn't open it lol - there was "no application available" to read it.) I can't go through the manual steps because I cannot access the troubleshooting information in the Help menu and so cannot even begin step 1.)

  If anyone has any suggestions, I would be VERY happy! I thank very you much for your time and help!

  If qutting, it's because of the questions are now trying down option as you click the icon in the dock and choose force quit from the list!

  Also you have tired Fox fire rest functionality (otherwise said if your power to access)
  To do:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Toshiba Digitizer Pen does not work on Portege Z10T-A

  I have a Portege Z10T.-a.

  I bought new Toshiba Digitizer Pen PA5133U-1EUC.

  The link below, this pen is compatiable on my laptop. But it does not work. Y at - it no adjustment or the driver of this pen?

  http://www.Toshiba.com/us/accessorie...s/PA5133U-1EUC

  I think you should check if the device supports the digitizer and if so, you will need to calibrate the pen and touch settings.

  For this I recommend that you review the Microsoft FAQ on pen and touch settings:
  http://Windows.Microsoft.com/en-pH/w...Sked-questions

• Portege Z10T and Win7 - can't get the auto rotation screen

  Hello

  I installed windows 7 to a Portege z10t and can not get the screen auto rotation time reversed the portrait and landscape, I had a quick glance in the chart properties intel and cannot find anywhere them for this set up ideas and Googled it.

  Any ideas?

  Thank you

  Hello

  Are you sure that you have installed all the tools essential to Toshiba and utilities like Win 7 drivers for this series Portege Z10T?

  Driver Toshiba UE page provides the essential as software * easy Control.* Tablet
  This utility is required for the function of automatic rotation of the tablet.

  I recommend you to check if all the software available on the page of the Toshiba UE driver has been installed and working properly on your laptop

• I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  -do not disturb - the settings on

• I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.

  Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com

  Go to find my iphone and erase the phone.

• keyboard to use the Brazil

  I have a HP ENVY dv6 and it is not possible to configure the keyboard to use the (?) without using him copy / paste. How to properly configure the keyboard... I live in the Brazil.

  Welcome to Shirley.

  Hold down the Fn key and ALT then press on your keyboard numAriques 63.

  Must have shown this.

  ?   Will not display until you release the Alt key and the Fn.

  REO