keyboard recognized only in Mode safe

Similar Questions

• Firefox 5 displays the right fonts only in Mode safe!

  After upgrading to Firefox 5, I noticed it displays the wrong fonts (larger than they should - they look ok in Firefox 4.x, Chrome, Opera).

  The strange thing is that if I run Firefox 5 Mode without failure, it displays it correctly. I have disabled all addons, I cleaned all Cache, configuration of the size of minimum font... even reinstalled. It is allowed only in Mode safe looking.

  What else to do?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  Try to turn some of the prefs Boolean gfx.font_rendering on the topic: configuration page to disable some features.
  
  Filter: gfx

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• Vista can only boot mode safe after updating Panda Internet Security installed on the system

  Original title: VISTA can only successfully starts in Mode safe. When you try the System Restore restarts in Normal Mode and restore failed "Volume Shadow Copy Service used by the system restore does not work"

  Problem started (I think) after that PANDA INTERNET SECURITY did a update and says a restart is required (29/09/2010). System could not restart normally. Started, but virtually nothing loaded and couldn't do anything.

  In Safe Mode, first mistake was a Protection Exception for TPSrv.exe (a PANDA executable)

  Tried to do a Safe Mode system restore to point before PANDA update (28/09/2010). System Restore starts safe mode and then restart in Normal Mode.  After about an hour comes up with error message "Volume Shadow Copy Service used by the system restore does not work. (0 x 81000202) event log.

  I also tried sfc.exe but found no compromise windows

  Hello

  Follow the steps mentioned below.

   

  Method 1:

  Check if the Volume Shadow Copy service is started. Follow the steps mentioned below.

  a. click the Start button and in the search box, type in: Services.

  b. press "Enter" to open the Services window.

  c. find related services that are listed above and check the status (on the road) and the Startup Type (automatic).

  d. double-click the service to change the status of started and set the startup type to automatic.

  Try to do a system restore and check.

  Method 2:

  Since you are able to boot into safe mode, I suggest you perform a clean boot and disable all non-Microsoft applications, then boot normally and control.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 3:

  If you think it's a Panda Security software that causes this problem then, I suggest to uninstall Panda security of the system and check if you're able to boot normally.

  http://www.pandasecurity.com/homeusers/support/card?ID=23010&IdIdioma=2

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Satellite L30 Vista screen don't be turned on; extrnal monitor works only in Mode safe

  Hello

  I have LS30-10s.
  first the laptop screen not lit up even if I saw a pale ghost of the icons etc.;

  I tried the fact to unplug and now the switch down (battery is dead long) successfully intermittent and random;

  I borrowed an external LCD (Lenovo $) and went well, and by pressing Fn + F5 would actually sometimes make the laptop screen live too.

  I changed the screen inverter and that seemed to restore the laptop screen, but the next time I restarted + or + screen would work unless I chose safe mode.

  Currently I can only use the screen external and only in safe mode.

  Everyone knows this?

  Hello

  Just a few questions:
  The external monitor works properly before disassembling the laptop and replaced the LCD inverter Board?
  What exactly happens if you start the computer in normal mode?

  Have you tried to start Notepad using a Live CD (PE Win or Linux live CD)?
  I would also recommend to check if new OS install is possible.

  Safe mode is just a test environment and the system does not access all recourses of material by using safe mode.
  So, theoretically the issue could be related to a faulty hardware or system problems.

• Laptop starts only in Mode safe

  When I connect with normal settings my login screen is blurred. the only time where it is not blurry is when it is in safe mode. How can I do. to return to normal?

  Hello

  This looks like a problem with your graphics drivers for graphics hardware itself:

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Or try this:

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  If fixed it, you may need to replace the graphics hardware.

  See you soon.

• hidden admin account is unlocked, how to show only in Mode safe

  Recently, I've unlocked the Admin account hidden in my copy of Windows Vista Ultimate 64-bit.  Currently, the account presents itself as one account of another in the normal logon window, and icons for other users.

  I would like to know if there is a way to hide the account in the logon window and only allow him to show when it is safe mode is enacted (as in Windows XP).

  Hello

  This allows try again. It is not good to use the hidden administrator account, as this is the last possible road
  a difficulty if things go really wrong. So make another ADMIN account with your password even. You
  then have two accounts administrator and any number of user accounts set up (not to mention
  the moment hidden the ADMIN account).

  How to create a new user account in Vista (except to raise it to the status of ADMIN)
  http://www.Vistax64.com/tutorials/93009-user-account-create.html

  You can have the login screen requires a name and a password so well that you can open a session with a
  Account ADMIN, he is not named. Also we can connect with any valid user account.

  How to make Vista require a user name and password when connecting
  http://www.Vistax64.com/tutorials/89812-logon-username-password.html

  How to hide or show an account in Vista and Windows 7
  http://www.Vistax64.com/tutorials/94805-user-account-hide.html

  Then, as explained in the link mode without failure in the previous answer, that you can connect with any account
  you have available and enable the hidden account if necessary (which you shouldn't have to)
  two ADMIN accounts that you can use) while is safe.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Mouse pad works only in Mode safe

  The mouse on my computer stopped working. When I log in an image comes from this mousepad with a circle and a line through it, and then a small yellow light appears on the mouse pad. The mouse pad works in safe mode.

  Visit your PC manufacturers support site and reinstall the drivers mouse pad and the drivers from the chipset possible.

  Then in windows update settings, disable the recommended, leaving only important updates to install updates for auto

• Computer starts only in Mode safe after automatic updates.

  Over the weekend, that some automatic updates ran on my XP computer and now my computer won't start mode without failure.  I've done several restorations, and it still does not start correctly.  Any suggestions?  I use AVG Free antivirus.

  Don't know if that makes a difference, but I looked back and in 2003, we bought the computer...

  It makes a big difference ! At the #1 stage, you want to download a different removal tool using this link instead-online ftp://ftp.symantec.com/misc/consumer/Rnav2003.exe

  All the other steps remain the same.

  You may be able to connect after restarting in Safe Mode with networking by my previous answer - but be VERY CAREFUL and connect just long enough to do what you need to do.

  If my fix works, you should be able to connect to normal (Windows) to the time where you get to step 4. If not, well..., we'll cross that bridge if and when we come to it.

• Internet connection only in Mode safe mode with networking

  I was using the Internet at home, when I had a pop up telling me there was an anti-virus program download. I pulled out the window pop-up, rebooted the computer and turned on safe mode with network. I thought it was just a problem of virus/malware/spyware. Since I installed several programs to prevent/remove any type of spyware (virus, etc.), I decided to run in safe mode, just in case. I ran the and after he said that my computer was clean, I restarted the computer in normal mode. The internet, however, did more work. He said that the Internet connection was closed portals HTTP, HTTPS and FTP. He also recommended that I check my firewall settings. I use the internet in safe mode with networking, and it works here though.

  I'm not really sure what the problem is with the internet settings. I could really use some help!

  Hi AngelicaR,

  OK, you should now check your firewall settings, to do so right click my network connection on your desktop-> select Properties (or click Start-> Settings Control Panel-> network connection)

  Now right click on your connection to the LAN->-> Advanced->-online advanced, settings, settings-the default settings online-> restore default settings. This will restore the default firewall on your local network connection. Click ok on the screen and restart your pc to see if its working.

  If you find the same problem again and then come to the same path: required connection to the local network-> settings-> Advanced-> settings-online Exceprions-> Tickmark the HTTP, HTTPS and FTP, also tickmark "display notification when firewall blocks a program" that will help you the notification to allow access through the firewall. Click ok on the whole screen, restart your pc.

  I hope this helps.

• Computer starts only in Mode safe

  Hello. My question is this... I turned on my computer the other day and I got the "Starting Windows" screen, but then it just went to a black screen. Tried again, same result, same let it run for 30 minutes, but nothing else happened. Reset, press F8, tried in Safe Mode, it's my office. I also get secure with Networking mode. Tried the option repair. Windows could not automatically solve the problem. Unfortunately the system restore has been disabled so there is no restore point to reset to. What can I do so that he can start normally? Thanks in advance.

  Hello

  When the built-in repair software option does not work:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Tecra 8100 only start in safe mode

  I seem to have lost the display drivers for my Tecra 8100.

  As I tried to use an additional screen that worked well until I came to initialize the next day when it would only boot mode safe.
  What I did wrong and how I can fix?

  Detective driver does not work, everything happens as having performed an illegal operation.

  Hello!

  Have you checked the Web from Toshiba site?
  I doubt that this is because there you can download all the drivers.

  Check this box:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  The driver that you can find in * Archives *.

  Good bye

• My computer only starts in Mode safe

  My computer will only start in safe mode.  In safe mode, it works without problem.  I tried to do a system restore, but could not do so even when I went back to the earlier restore point option.  I am running Vista Ultimate. This problem was caused after the download and execution of Windows Defender with a separate CD drive, I created.   I want to fix the problem, but I'm ready to give up and would like to know if I can upgrade to Windows 7 with my computer that works only in Mode safe?

  Go to start / run type msconfig. Then go to the Startup tab. Secure boot is checked here? In this case it uncheck then OK then restart. You don't (generally install windows from windows or safe mode). Restart you change the boot on cd/dvd drive. Then save settings / reboot. Whats follow on-screen. This will allow you to do a clean install / format. Then he "he's installing Win7

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• HP SlimDesktop 450-a114: keyboard and mouse only work in safe mode

  When that I starts normally, the keyboard and the mouse do not work and I can not connect.

  If I boot in safe mode, the mouse and keyboard and I can open a session.

  In safe mode, when I go into Device Manager, the device of keyboards is "HID Keyboard Device" and the mouse device is "mouse HID-compliant".  What should I do?

  Thank you

  Mike

  If it works in Mode safe is probably a driver issue because Safe Mode doesn't load any third-party drivers.

  I suggest that you go into Device Manager"and uninstall the keyboard and the mouse. To restart Windows will detect the keyboard and mouse and reinstall the drivers, I hope as fixing the problem.

  * You didn't say what version of Windows you use, so I could not be more specific on how to access the Device Manager.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Keyboard only works in safe mode

  My keyboard was working fine, then one morning that I went to for use and he typed a letter can be stopped.

  Checked the keyboard on another computer and worked very well. Batteries are fully charged.

  I bought a new direct wired keyboard and that the keyboard wouldn't work either.

  I tried EVERYTHING... So frustrated. The keyboard works perfectly fine in safe mode, but the minute I get out of safe mode, it will not work.

  I have a mouse of keyboard / wireless Logiteck set. Mouse doesn't have problems...

  SOMEONE PLEASE HELP!

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description issue that works your keyboard is fine in safe mode and on other computers. Thus, there might be a chance that there is some third party conflicts or startup services-Articles-application is causing the problem. It can also be generated if drivers get corrupted or need a update.

  Try these steps and see if it helps you to solve the problem.

  Method 1

  Try to start the computer in a clean boot state and see if it helps you to solve the problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Method 2

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Method 3

  If the problem persists, try the steps in the article mentioned below and see if it helps you to solve the problem.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards