Unknown devices after installing Vista on Satellite Pro U200

Similar Questions

• M30-801-unknown device after installing XP W satellite

  After installing XP SP2 (not Toshiba) I get "Unknown device" in Device Manager.
  (I tried display, wireless, Chipset, Audio, network, Modem and other and all is well but I always get 1 "unknown device").
  Notepad is Toshiba Satellite M30-801
  I need help.

  Hi Alfio

  Please take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5075

  I made a few recommendations to somebody else with a similar problem.

  Good luck

  Tom

• Satellite A100-237: unknown device after installing Vista

  Hi all

  Just installed vista on my A100-237... After doing the upgrade of the BIOS and the installation of the "unknown device" Value Pack, with the location "on system compatible ACPI Microsoft" appeared in my device manager, any ideas on how to address this issue?

  Thanks in advance!

  Hello

  Could you please check if you can see the 'Batteries' entry under ' computer in Device Manager?
  As far as I know that the entrance of batteries should have a "Microsoft SMART Battery" & "Microsoft SMART Battery subsystem.

  If there is an unknown device, this might have something to do with Microsoft ACPI Compliant Embedded Controller.
  In this case it seems that you need a driver for MS SMART SMART Battery & MS battery subsystem.

  pleasae also check this thread;
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14575

• Satellite X 200 - 21 d - two unknown devices after installing Vista 64 bit

  I just newly installed (my Vista 64-bit), my laptop 21(d) and noticed that in Device Manager, there is option - hidden features, then 2 new unknown devices appear.
  What are these devices and where to find the right driver for it?

  Hi there is green Orchid,

  Is the vista 64-bit, that you have installed the software that came with the system or a version of windows?

  Before installing vista, have you checked if there are external devices connected to the system?

  Post edited by: iSkO

• HP Pavilion 17-e102ed: unknown device after installing windows 8.1

  ACPI\HPQ6007 unknown device after installation windows8.1 64B

  17 - HP Pavilion notebook pc (ENERGY STAR) e102ed

  Device ACPI\HPQ6007\3 & 11583659 & 0 has been set up.

  Driver name: null
  The class GUID: {00000000-0000-0000-0000-000000000000}
  Driver date:
  Driver version:
  Driver provider:
  Section of the driver:
  Rank of pilot: 0x0
  Matching device ID:
  Advanced driver:
  Update of the device: false

  Hello:

  You need the driver for this device...

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Get the error message when you try an upgrade to Vista on Satellite Pro U200

  Hello
  When I upgraded my Satellite Pro U200 to Vista (original CD using Toshiba), I couldn't install Config Free program. When I want to install it, I get the message 'the installation image is not corrcet' ideas for this problem?

  Thank you

  Hello

  Maybe you need to download again the configfree for your machine from here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Just download and try to install it. I can't imagine that she won´t, I ve updated work my A100 some time ago and everything works fine.
  BTW. I downloaded all the stuff from the link above.

  Please give some feedback

  Greetings

• Satellite A500 - unknown device after installing Win7

  Hello

  I just installed Windows 7 64 bit in my laptop Toshiba Satellite A500-132 and in Device Manager its saying that there is no unknown device ACPI\ENE0200. Do you know what drivers should I install?

  And the second problem is that when I installed the pack value there is usually a red light that shines through the headphone jack, but when I installed the audio driver of light disappeared and doesn t shine more.

  Y at - it a fix for this?

  Hello

  I agree with the user above. This sounds like the CIR port and you need to download this driver.

  But I a bit confused about the light in the headphone jack of Mr. are you sure that there's a light or you can post a photo for example?

• Satellite A500-1GH - unknown device after installing Windows

  Hello

  I installed Windows 7 Ultimate (Genuine) installed all the drivers I could find in the Toshiba site and almost all the Windows updates, but I have a device that is not recognized:

  (1) unknown Device

  Hey,.

  Unfortunately, I think that no one here can tell you what device driver is missing exactly
  Can you post the vendor and device ID?

  Maybe this can help you a bit:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• Tecra M7 unknown device after installing Win XP

  Hello

  I have a Tecra M7 Tablet PC.

  After installing Windows XP Tablet PC edition and all the drivers for the Toshiba Homepage there are 3 s "unknown device" in Device Manager.

  I installed the Ethernet drivers, but I do not see the adapter to the source 'network '.

  What can I do to fix this?

  MFG pizzaMAN

  Since I n don't know what you mean devices I can't provide you with any information on the necessary drivers

  You're talking about Ethernet driver you are meaning the LAN or WLan?
  Usually the two cards (Wlan & Lan) should appear in devices-> network cards Manager
  If there is an unknown device then it would mean that one of the pilots was not installed.

  On the European driver Toshiba page, you will find two Intel LAN drivers.
  Check both!

  I put t know what your laptop wireless network card is because the Tecra M7 has been equipped with various wireless network cards, but all the drivers (Intel, Atheros) are placed on the page and you should try it!

• Pavilion 11 x 2: unknown device after installing Windows 10

  After the upgrade to Windows 10 my Device Manager shows that my PCI encryption/decryption controller has no driver installed.  I tried to use the HP Web site to get all the drivers, but it still doesn't load the drivers Intel Trusted Execution and now shows "unknown device" with no driver loaded.  How can I solve this?

  You are the very welcome.

  The driver that I posted did not work is because the Intel CITY device has been successfully installed.

  The unknown device is a totally different animal, and he needs this driver...

  This package contains the driver which allows Intel DynamicPlatform firmware and frame heat. AndThermal framework of Intel dynamic platform providing system utilizationinformation of temperature and power to the thermal protection system work properly. This package is provided for the laptop models running the asupported operating system.

  File name: sp64799.exe

• E3 112 showing unknown devices after installing Windows 10 build 10240

  I improved my 112 E3 with a Samsung Evo 850 120 GB SSD and installed Windows 10 build 10240.

  In Device Manager, I have a few unknown devices and two others with no driver.

  

  Can someone tell me what these are, as I can't seem to find the drivers at all and if I disable or remove, they come back just after each start up...

  I don't know if they will work on windows 10 but:

  http://global-download.Acer.com/GDFiles/driver/TXE/TXE_Intel_1.1.0.1064_W81x64_A.zip?acerid=63552588...

  http://global-download.Acer.com/GDFiles/driver/IO%20Drivers/IO%20Drivers_Intel_603.9600.1948.28229_W...

• An unknown device after installing Win 8.1, has occurred as the ACPI\INT33D6\5 & 15d725f4 & 0

  INSA everyone,

  After a marathon of several pre upgrades and updates post, I got up my VAIO DUO (svd13217PA) and running well, yet, the only glitch that occurred to me was the unknown device marked as ACPI\INT33D6\5 & 15d725f4 & 0.

  All ideas,

  Rami

  Hi RamiS77,

  The American model, which is updated the Intel virtual buttons.  Please check and install for your model of this region.

  Nick-

• Unknown device after installing Windows 8

  I have a HP Pavilion G6, it came with windows 7 and I have recently updated with windows 8 pro (64-bit), I've updated all the drivers on the support page for my model, everything works fine, but there is that the OS does not recognize a device, he simpy shows 'Unknown device ACPI' material what ID is :

  ACPI\VEN_HPQ & DEV_6001
  ACPI\HPQ6001
  * HPQ6001
  I hope that there is a driver for this device works.

  Hello

  Please download and install the drivers for your windows wireless button 8 PC.

  FTP://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

  and Info is here.

  FTP://FTP.HP.com/pub/SoftPaq/sp58501-59000/sp58720.html

  I hope this can help, good luck!

• Re: Microphone completely after installing XP on Satellite Pro P300

  My father bought a Satellite Pro P300 that I went down to Windows XP by using the included CD/DVD.
  Later, we found that the internal microphone is very quiet when we tried to use it.
  We need to yell into the microphone to get any sound at all, more like sounds random blip. Type the microphone sounds more scratch.

  All other sound effects are great. speakers work fine. We connected an external microphone to the mine in the laptop and video calls worked without problem, the problem is only with the internal mic.
  I saw that someone else has the same problem in the forum (link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=33844&tstart=0]), but it does not say how or if this problem has been resolved.

  I would really appreciate if someone could give me the fix or a link to the fix to our problem other than plug in an external microphone.

  Hello

  Windows XP supports a microphone amplifier. Have you enabled it?

  Go to control panel-> Audio & Sound Devices-> advance tab press Volume button

  Optionally, select advanced controls

  Then you should see the volume of the microphone. Please set it to a higher value.
  In addition, press the advanced under the microphone button.

  Here, you can mark the micro amp.

  Concerning

• Portege R500 - I've got two unknown devices after installing XP

  Hello

  I am looking drivers for the two unknown devices in the hardware Manager:

  alias
  "Intel(r) 82801GBM (ICH7-M/U) LPC Controller"
  and
  'System compatible ACPI Microsoft'

  Thank you
  Roger

  Hello

  Have you installed all the drivers Toshiba XP which appear on the European driver from Toshiba site?

  There is also a training installation document that gives the proper installation order. Please check if all the XP drivers were installed, as mentioned in this doc.

  In addition, you should check if you have installed the MS WinXP SP2 and Utility Intel chipset.

  Greetings