Satellite Pro P300 - impossible to activate the built-in microphone

Similar Questions

• Satellite Pro U500 - download to activate the built in webcam?

  My apologies if this is the wrong forum, but I'm a new user here.

  can someone direct me to a link to the download to activate the built in webcam on my satellite pro u500 please?

  Thanks to all in advance

  marchamjack

  Hello and welcome to Toshiba support forum.
  At has first of all tell us please what Satellite Pro you exactly.
  What operating system do you use?
  What is the problem with the webcam?

  Each laptop model comes with preinstalled OS and webcam should work fine.
  I presume that you should have Win7 64 bit, right?

• Satellite Pro 400CS: impossible to activate the APM

  Hello, I have on my pro 400Cs satellite I installed windows. In the equipment manager, APM support is disabled. If I have, it will activate and after a reboot it am off again. In addition, the announcement of the battery is missing. Sleep mode does not go as. If I have the software utility downloade it indicates with the announcement of the program Toshiba stack.

  What it am I do?

  By
  Frank

  Hello

  This device is a good old classic. As far as I know that it s about 10 years.
  It was delivered with the Win95 and Win98.
  Well, I can't give you a solution to your problem because this unit is too old.
  You'll be a man of luck even if someone here in the forum knows an answer to your problem. All I can suggest is to check the BIOS. Maybe that here you can activate or change it in addition the battery settings.

  Good luck

• Satellite Pro P300 - hot to get the WLAN driver in my device manager?

  I have a Toshiba Satellite Pro P300 with xp pro. My wlan driver atheros AR9281 does not work. I uninstalled it as suggested by Toshiba
  and downloaded a new. How can I get the download open and in Device Manager?

  Prior to do any create new folder on the desktop.
  Download driver driver and start TC00147200C.exe Toshiba will start extraction of archive
  Click on Options
  Click Browse, and then choose new folder on the desktop
  Click next
  Click Start
  When finished open the new folder and go to the folder XPDrv
  Start the installation with setup.exe and the installation should start

  Can you please confirm if it works?

• Satellite Pro P300 - how to get the original without media image?

  Hello

  I received a Satellite Pro P300 and there the for win xp recovery disk, I would go back to the installation of Vista pre installed if possible.

  The recovery on the hard disk partition is not available, so I guess, that it cannot be recovered. Is it possible to buy an original image?

  Liam is just that Win 7 is better than Vista OS.
  So if you have the ability to install Win 7 I recommend doing this instead of Vista.

  However, the Toshiba recovery disc contain only the Vista OS.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• How to re - activate the built-in microphone idt?

  Hello

  I have a HP Pavilion dv6 series laptop Win7 32

  I tried to cut my built-in microphone so selected idt it and selected disable - now it seems to have disappeared from the system, and I can't find it. not in the hardware devices (not that I can find anyway) and find new devices can not find.

  Any suggestions?

  Thank you

  Thanks for the idea, banhien!

  When I right click the image he showed an option to display disabled devices (which was not selected by default) and when I chose "show disabled" the missing microphone rolled up and then I could right click on it and enable it.

  (And this is supposed to be a "Computer is personal again" Entertainment Notebook!)

• Re: Satellite L100-179. impossible to activate the new WLan card inserted

  Hi all

  I bought a computer laptop satellite L100-179 wireless about 2.5 years ago.
  Last week I bought an Inter (R) PRO/Wireless 2915ABG Network Connection, this is an internal card!

  I installed the card and the latest drivers and the card worked properly under Device Manager
  When I tried to use the card after setting the wireless settings, I started to have problems.

  I then installed the software for the card help with the problem which has been the software Intel(r) PROSet/Wireless WiFi 12.1.2.0 that gave me a little more information about the problem. All the settings for the wifi are enabled except when I press Fn + F8 I get the following message:

  Wireless communication is disabled. Please turn on the wireless switch.

  But there is no switch on the side of the laptop just a plug of cache.
  I've ran out of ideas to get this working and would be really grateful for the help.
  My OS is XP home SP3.

  Hello

  I think that your Sat L100-179 is not extensible WLan.
  If this laptop has been delivered without the WLan card and the WLan switch does not exist, then you cannot use an internal WLan card!

  In this case, go to an external solution such as a USB WiFi key for example

  Welcome them

• Satellite A350-212: Impossible to activate the microphone

  Hello.

  I have laptop toshiba A350-212 and I have problem w? micro th.
  I disable audio device after that I can't enable this device again.

  How l? He's I resolve this problem.

  Hello

  Please check the settings in the control panel-> audio-> recording
  You should see the microphone and should be able to activate this once again.

• Satellite L505-13F - impossible to activate the wireless connection

  Hello, I have connectivity problems with my Satellite L505-13F.

  I can't turn on the wireless connection. I press Fn + F8 and nothing happens. The indicator at the bottom of the laptom turns on.

  I though this would be a problem with the drivers. I downloaded realtek wlan driver here [http://aps2.toshiba-tro.de/wlan/?page=downloads], but it has not installed correctly. Then I used the toshiba software installer, but yet again, nothing has changed. I have Windows 7 Home premium 64-bit.

  Device management, I have seen that I installed a wifi driver. (Realtek RTL8191SE Wirelless Lan...) So, what the problem is?

  Any suggestions?

  Hey,.

  Something happens if you press other keys FN or FN + F8 doesn't work only? Normally with this key combination you can enable/disable wireless network card.

  In addition, it would be interesting to know what happens if you are looking for WLAN networks. You see your WLAN router?

  If all the keys FN n t work, reinstall the package of added value and utility to Support Flash Cards. Otherwise, it could be another problem and you should reinstall the driver again and make sure the firewall isn't blocking the connection.

  See you soon

• Satellite Pro L300 - how to disable the built-in webcam

  I don't like my integrated webcam.
  So I bought a new.
  But I want when the video call feature or something that have integrated starts up not my logitech one.

  How I can either:
  Disable my only integrated? [note: I have uninstall the software, but it always does.

  or

  Make my logitech one by default if its used each time?

  Help please its stressing out me!

  I have a Sat Pro L300

  Thank you guys!

  Hello

  I put t know what software you use but generally you can always choose the favorite webcam or microphone in the settings of the software.

  For example, I use Skype and Skype settings, I can choose between the internal webcam and my external webcam.

  In addition, you can disable each device in the Device Manager I that you would disable a Red Cross, then it should appear to the disabled device (webcam)

  See you soon