Re-not installed XP in VirtualBox - no activation

A few months ago, I installed XP in VirtualBox, in order to access certain documents of Lotus's SmartSuite.  Everything was going fine until I had a catastrophic situation when Windows Update failed, and no so the restoration, which requires a refresh.  Now, I reinstalled VirtualBox and XP, but I can not connect because my activation key (exactly the one that previously worked) is no longer accepted.

I'm running Windows 8.1 and also have a Windows 7 installation.  I need to identify the best way to get these files.  I prefer the VirtualBox solution, but will accept any other way course.

Any suggestions gratefully received.

Anne

If it (Lotus) installs on Windows XP & Windows 7 I see not why do not install on Windows 8, install it in compatibility mode.  To install in compatibility mode right click on the installer and select 'Properties' then click the 'Compatibility' tab and check "run this program in compatibility mode for:." in the drop-down list, select the version of Windows for your version of Lotus Smart Suite.   Once installed, you can also do the same to run the program in compatibility mode, or you can create a shortcut for the program and set the compatibility mode in the shortcut itself.

John

Tags: Windows

Similar Questions

  • I'm a student of Adobe CS5 version and there are a few updates to download, but not install.  I have enough active licenses.  What can I do to install these updates.  CS5 is sufficient for my needs.  I needed to go back to OEM and everything and reinstall

    I had to find my computer OEM conditions.  I have a copy of the Adobe CS5 student version.  It is sufficient for my needs.  Only, I reloaded CS5 and tried to get the basis for program updates.  They have downloaded, but then they not have installed.  I would like to install these updates of Basic.  I have valid licenses for the product.  Please help if you can.

    Try direct updates

    https://www.Adobe.com/downloads/updates/

  • Satellite Pro C850 - peripheral Audio not installed

    Satellite Pro C850, suddenly had res cross on its icon and no noise. Says the audio device not installed. Have tried deactivation/activation and also updated, no joy.

    Can anyone help?

    Fixed it, to download a driver.

  • Standard of the CS6 install because it is already activated on both machines, but one crashed.

    Standard of the CS6 will not install because it is already activated on both machines. However, crashed by a machine and I can not disable here. Support Adobe says it's a 'technical error', because according to them, there are 4 remaining activations. However their suggestion for a fix was to post here. How can I disable the software on the device crashed?

    (Note: this is not Creative Cloud.) This is the product offline.)

    I don't have a file number from my chat conversation last night. The other contact took end PMs Twitter last night and this morning.

    The good news is that suggested Twitter support team download us the CS6 software on the site rather than use our disks, and who seems to have made a difference. We were able to activate with the downloaded version a bit ago. Not sure why there is a difference between the discs and the download on this issue, but I'm happy to live with this mystery in exchange of software work.

    Thanks for the replies.

    Matt

  • I installed java and active. But some shoeing that java applications are not installed and enabled.

    I use ubuntu 12.04. I installed java inside. In firefox also I activated it. But some allplicatios like keepvid showing that java is not installed or not enabled. Done all the priliminary troubulshootings as verification of restart and everything

    Hello

    Try checking your version of plugins:

    I don't see Java installed on your computer also.
    Where's the installer?

    Also:
    Try going to Subject: config search plugin.state.java and change its truevalue, too, go to Tools > > Addons > > Plugins and look for Java and change his option still active or have active

  • The KB2929437 patch is not installing on my PC. Without this fix IE 11 business mode is not activating.

    I am running Windows 7 and IE 11. The KB2929437 patch is not installing on my PC. When you try to install, I get the message that this patch is not applicable to your PC. Without this fix IE 11 business mode is not activating. Help, please

    Hello

    Please contact Microsoft Community.

    Please provide detailed information about your question.

    According to the description of the problem, it seems that you can not install the patch (KB2929437), this problem may occur if one or more of the following conditions are met:

    1. The Windows Update database is damaged.
    2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
    3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
    4. A required system file is incorrectly registered.

    If it helps, try the methods and check them off below.

    Method 1

    If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

    Method 2

    Step 1

    If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Step 2

    Try to follow the steps in the Microsoft Article and check if it helps.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

    Method 3

    If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

    Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

    Important:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Additional information:

    You can also refer to the following Microsoft article for more details on the update (KB2929437) .

    Description of the update of security for Internet Explorer 11 on Windows 7 and Windows Server 2008 R2: April 8, 2014

    http://support.Microsoft.com/kb/2929437/en-us

    I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?

    My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?

    Hi edharaway,

    Please visit this link: Get the Code of Activation for Adobe Acrobat 7.0 Pro

    Thank you!

    Shivam

  • I BOUGHT ADOBE PHOTO ELEMENTS 14 AMAZON I CHOSE A MAC DOWNLOAD DOWNLOADED WHEN I TRIED TO INSTALL TI IT HE ASKED A SERIAL NUMBER WHICH I DID NOT ALL PROVIDED AMAZON WAS AN ACTIVATION CODE OF 26 FIGURES THAT ADOBE HAS REJECTED WHEN I ENTRY IN SER

    I BOUGHT ADOBE PHOTO ELEMENTS 14 AMAZON I CHOSE A MAC DOWNLOAD DOWNLOADED WHEN I TRIED TO INSTALL TI IT HE ASKED A SERIAL NUMBER WHICH I DID NOT ALL PROVIDED AMAZON WAS AN ACTIVATION CODE OF 26 FIGURES THAT ADOBE HAS REJECTED WHEN I INSCRIPTION IN BOXES OF SERIAL NUMBER PLEASE HELP

    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

    - and https://forums.adobe.com/thread/1572504

  • Adobe Flash Player 11.0.1.152 could not install. Successful installation of Flash Player 11.1.102.62 manual. Flash Player said "Install Complete" However, Flash Player works with Internet Explorer! What seems to be the problem? j.Durk@Verizon.net

    Adobe Flash Player 11.0.1.152 could not install. Flash Player 11.1.102.62 installation manual (32 & 64-bit version) managed after that Ctrl, Alt, delete on the processes tab find firefox.exe * 32 has been active and I finished it. Flash Player installer said "Install Complete" I uninstalled Firefox and Flash Player several times without success. However, Flash Player works with Internet Explorer! What seems to be the problem? [email protected]

    You have probably installed a 64 bit version of Flash for Firefox plugin.

    Firefox is a 332-bit application, so you need 32-bit versions of a plugin to make it work.

    You can find the 32-bit version of the Flash Player installer for a 32-bit version of Firefox here (scroll down to Flash Player (32-bit)):

  • Satellite C650D/006: LAN driver not installed in win 7 installation custom

    Hi everyone, I bought a laptop Satellite C650D/006 yesterday from the original owner and he is 5 months old, but I don't like the installation of Windows 7 Home premium 32 bit OEM toshiba so I deleted from the hard drive and installed a complete installation customized windows 7 Edition home premium 32-bit and active with the OEM - COA key on the laptop.

    http://www.MyToshiba.com.au/products/notebooks/satellite/C650D/psc16a-006011/overview#details

    After installation, I noticed that the LAN controller has not been installed in Device Manager so I couldn't of internet connection to run automatic updates of microsoft for win 7,

    I went to the toshiba website and download the driver of network for this laptop and I installed it manually, and after that the laptop has been connected to the internet via an ethernet cable.

    can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

    even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.

    see you soon

    > can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

    If I understand your message, you have deleted the preinstalled Toshiba OS and installed a clean Win 7 OS in this notebook. Right?
    This means that all drivers must be installed after the installation of Windows.
    In some cases the Win 7 use standard Microsoft drivers that are part of the operating system and some devices may be recognized automatically, but in most cases you will need to install the correct drivers.

    > even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.
    Than other cell phones use the same chip as C650 LAN card? I doubt not all laptops use the same LAN chip, which means that different driver must be installed.

  • Satellite Pro L300 - 'problem adapter - driver not installed.

    I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

    If you can help I would be very grateful.

    I went to Accessories - system information and here is the result:
    Connection TV/video Microsoft name [00000001]
    Card type not available
    Connection TV/video Microsoft product Type
    Installed Yes
    PNP ID of device not available
    Last reset 10/05/2012 07:09
    Index 1
    Service name NdisIP
    IP address not available
    IP subnet not available
    Default IP gateway not available
    Active Yes DHCP
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available

    Name [00000002] RAS Async adapter
    Card type not available
    Card product Type RAS Async
    Installed Yes
    PNP ID of device not available
    Last reset 10/05/2012 07:09
    Index 2
    Service name AsyncMac
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available

    Name [00000003] Wan WAN (L2TP) Miniport
    Card type not available
    Product type Wan (L2TP) WAN Miniport
    Installed Yes
    ROOT\MS_L2TPMINIPORT\0000 PNP device ID
    Last reset 10/05/2012 07:09
    Index 3
    Service name Rasl2tp
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
    Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

    Name [00000004] Wan WAN (PPTP) Miniport
    Adapter Type wide area network (WAN)
    Product type Miniport Wan WAN (PPTP)
    Installed Yes
    ROOT\MS_PPTPMINIPORT\0000 PNP device ID
    Last reset 10/05/2012 07:09
    Index 4
    Service name PptpMiniport
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 50:50:54:50:30:30
    Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

    Name [00000005] WAN (PPPOE) Miniport
    Adapter Type wide area network (WAN)
    Product type WAN (PPPOE) Miniport
    Installed Yes
    ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
    Last reset 10/05/2012 07:09
    Index 5
    Service name RasPppoe
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 33:50:6F:45:30:30
    Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

    Name [00000006] Direct parallel
    Card type not available
    Product Type Direct parallel
    Installed Yes
    ROOT\MS_PTIMINIPORT\0000 PNP device ID
    Last reset 10/05/2012 07:09
    Index 6
    Service name Raspti
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
    Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

    Name [00000007] Wan (IP) Miniport
    Card type not available
    Type of product (IP) WAN Miniport
    Installed Yes
    ROOT\MS_NDISWANIP\0000 PNP device ID
    Last reset 10/05/2012 07:09
    Index 7
    Service name NdisWan
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address is not available
    Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

    Name [00000008] Packet Scheduler Miniport
    Adapter Type Ethernet 802.3
    Product Type Packet Scheduler Miniport
    Installed Yes
    ROOT\MS_PSCHEDMP\0000 PNP device ID
    Last reset 10/05/2012 07:09
    8 index
    Name of the service
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address A4:3E:20:52:41:53
    Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

    Name [00000009] Realtek PCIe FE Family Controller
    Adapter Type Ethernet 802.3
    Product Type Realtek PCIe FE Family Controller
    Installed Yes
    PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
    Last reset 10/05/2012 07:09
    Index 9
    RTLE8023xp service name
    The 0.0.0.0 IP address
    IP subnet
    Default IP gateway not available
    Active Yes DHCP
    255.255.255.255 DHCP server
    DHCP lease expires 21/03/2012 13:23
    DHCP lease obtained 21/03/2012 12:23
    MAC address 00:1E:33:3F:0 D: 3RD
    IO port 0 x 00003000-0x00004FFF
    0xD0010000-0xD0010FFF memory address
    0xD0000000-0xD10FFFFF memory address
    IRQ channel, IRQ 16
    Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

    Name [00000010] Packet Scheduler Miniport
    Adapter Type Ethernet 802.3
    Product Type Packet Scheduler Miniport
    Installed Yes
    ROOT\MS_PSCHEDMP\0001 PNP device ID
    Last reset 10/05/2012 07:09
    Index 10
    Name of the service
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    MAC address 00:1E:33:3F:0 D: 3RD
    Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

    Name [00000011] wireless intermediate driver
    Adapter Type Ethernet 802.3
    Product Type Wireless intermediate driver
    Installed Yes
    ROOT\WSIMDMP\0000 PNP device ID
    Last reset 10/05/2012 07:09
    11 index
    Name of the service
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    00: 1B: MAC address 9E:F4:09:A7
    Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

    Name [00000012] Packet Scheduler Miniport
    Adapter Type Ethernet 802.3
    Product Type Packet Scheduler Miniport
    Installed Yes
    ROOT\MS_PSCHEDMP\0002 PNP device ID
    Last reset 10/05/2012 07:09
    12 index
    Name of the service
    IP address not available
    IP subnet not available
    Default IP gateway not available
    DHCP active No.
    DHCP server not available
    DHCP lease expires not available
    DHCP lease obtained is not available
    00: 1B: MAC address 9E:F4:09:A7
    Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

    Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
    Adapter Type Ethernet 802.3
    Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
    Installed Yes
    USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
    Last reset 10/05/2012 07:09
    Index 16
    Service name RTL8187B
    10.1.1.4 IP address
    255.0.0.0 subnet IP
    Gateway IP 10.1.1.1
    Active Yes DHCP
    10.1.1.1 DHCP server
    DHCP lease expires on 10/05/2012 08:10
    DHCP lease obtained 10/05/2012 07:10
    00: 1B: MAC address 9E:F4:09:A7
    Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

    Thank you!!!

    Can you please open device manager and check if this is some unknown device listed?

    By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • Qosmio G30-102: why is put in Picture not installed Utility value?

    Hi-

    I recently purchased a Qosmio G30-102 with nVIDIA GeForce Go 7600. In Chapter 6 of the manual, it refers to the utility of photo as part of the QosmioEngine installation development. Appears not to be entered preinstalled on your laptop. How can I get this program and why is it not already there?

    Thank you

    Mark

    Are you sure that this app is missing on you laptop to 100%?
    I ask because usually the image Enhancement Utility V3.8.0.0 TOSHIBA must be installed

    The QosmioEngine is active when you use the Qosmio Player TV or the DVD player Qosmio. In addition, the image of Toshiba Enhancement Utility is available on models nVidia Go7300.
    If you have the nVidia Go7300 graphics card you might check the windows, tabs in the nVidia desktop Manager Applications

  • WLAN on Tecra 9100 - LED should go orange if the s/w keyboard shortcut NOT installed?

    I bought a Tecra 9100 that had been restored to XP SP1 and without good Toshiba utilities that most drivers seemed to be OK - for example screen OK but USB has been 1.1 until I added the Intel Chipset drivers.

    I can't get the WLAN card to work by sliding the switch (close microphone) - also, it does NOT appear in Device Manager. I spotted a post below (which was locked) where Pedro said WiFi hotkey software must be installed to make it work. Two questions:

    1 if the s/w keyboard shortcut IS NOT installed should always be able to mount the light Orange / appear in Device Manager
    2. is there an alternate download site because I tried 20 times in the last 15 hours at: http://support.toshiba-tro.de/tedd-files2/0/cmod-en-20070925121500.zip (for the common modules) and the site just seems to be 'dead' - nothing is received at all

    Thank you very much in advance - I want to become a happy member of Tosh' club... Cheers, Brian R.

    PS; The Tecra has a WiFi tag on the bottom and even a MAC address and I have not yet looked for nothing changed so much material.

    Pedro post follows:
    + Hello +.

    + Is the map original WLAN or you have upgraded on your own? What is with Device Manager, this is the card of wireless network which are listed there? +

    + For the use of WLAN, there are few requirements: +.
    + WLAN switch must not be broken or defective.
    + Wireless network card must be compatible one.
    + The WLAN antenna must be connected correctly.
    + Wireless network card must be installed properly (the right driver must be installed) +.
    + Wireless network card must be enabled in the Device Manager.
    + Wireless network card must be activated using the FN + F8 key combination (Wireless Hotkey V2.0.0.1 must be preinstalled) +.

    (1) first you should check if there is a yellow exclamation (unknown device) in device under network adapter Manager.
    If you find any unknown devices in the network adapter section then your laptop was not equipped with WLan minPCI card!
    The shortcut key has nothing to do with the WLan card status in Device Manager! The keyboard shortcut software only controls the function FN + F8.

    (2) don t know what you mean! The functions of link!

  • KB976422 update does not install

    Windows Udate KB976422 will not install for me.  Whenever I run "update" it tells me that the update is an optional facility for my system.  Whenever it works, I see little CPU or disk activity.  The update task never ends.  If I run the update during the closing of the process, the PC stops later (long after I'm aslepp) but is still listed as an optional update after a reboot.

    I am running Windows 7 Ulitimate (64-bit) with 6 GB of RAM, 2.2 to disk (RAID 5, even if the OS is not on the RAID device) with all other updates installed suuccessfully.  The troubleshooter in windows didn't find a problem or suggest a way to proceed.  Is there a way to fix this, or should I just live without it?

    Have you tried manually by downloading and installing?

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=3ee91fc2-a9bc-4ee1-ACA3-2a9aff5915ea&displaylang=en

    Have you tried to turn off UAC before update?

    See: (Guided Help: settings to adjust user account control in Windows 7):
    http://support.microsoft.com/kb/975787/en-us.

    TaurArian [MVP] 2005-2010 - Update Services

  • Vista SP2 has not installed recovery changes. Error e000023f.__Please help computer is running fine now.

    Hi, I tried to install SP2 for Vista pack recently without success. Basically, I'll install and my computer stops then starts up and when installing it will cancel and say changes in recovery does not summers.

    When my computer load back to the top of the screen and the icons have become much bigger and my computer seems to be missing a lot of pilots.

    I tried to disable all the startup items.

    I tried to uninstall my Norton 360 program.

    Stand-alone setup I tried and it also does the same thing.

    Ran sfc/scannow, and it has detected an error and fixed it but no difference.

    I tried to run the system preparation tool, but loading upward it checks updates and asks me to install an update first. When you try to install the update, it happens at the same point every time and just hangs. If I wait long enough he will say: impossible to install and it is that I get.

    When I check history the next error code update to SP2 install is e000023f. I tried to check whether that SP2 was installed in part. When I go in the installed updates it have SP2 listed, but when I right click on it gives me no option to delete so I guess it was not installed. By going to computer/properties also confirmed that it is still SP1.

    Any help would be greatly appreciated that I like this update because my computer doesn't seem to be good at all currently underway. It takes more than an hour now to intall minor updates.

    Help, please.

    Thank you

    Mark

    If N360 is no longer installed (and before you reinstall it):

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    IMPORTANT! Should not connect your computer to the internet or any network without a fully functional anti-virus application & completely updated installed and an active firewall!

    Your misguided (IMHO) use of System Mechanic may have caused your problems. If you think your registry needs to "clean up" or "repaired" and need more convincing that it doe NOT, read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • Apple TV content 4 does not

    I click on TV Shows > purchases > and chose a show.  Progress circle a few rounds I let it run for an hour without change.  No matter what TV show I choose it is the same.  Now if I take my Mac open iTunes click on a show (and not on the laptop) and

  • How is - win 10 with you? Here's what brother me in!

    Hi guys... for a lot of us have updated to win 10 and I'm going to say it's great the day but... I am facing some hinder problems inside and I need to ask if you guys have the same problems / bugs and if there any way to remedy: 1 - my battery drains

  • Why can't get information from frequency of NI USB-5132

    Hello I use NI USB-5132 and try OR Scope example measure a library. I wonder why I can't get information from the input signal frequency. Thank you

  • NEITHER Veristand in Windows Server

    Has anyone tried having multiple developers to share a NI Veristand installation on a Windows Server machine? Developers would use the remote desktop for the initial development, and all work together to test and debug console. I believe that the lic

  • Global problems with IE crashing after installing the latest updates from Ms.

    After the installation of the last series MS Updates, we are seeing users get first notification DEP for Windows Explorer (using IE7), then an other error message stating that Windows must close THE Explorer. What happens when users try to access our