Global problems with IE crashing after installing the latest updates from Ms.

Similar Questions

• My computer is completely messed up after installing the latest updates from Microsoft. I need help/ideas to make it work again.

  Vista Business Service Pack 2
  32 bit
  2007-12-office
  Acrobat 9 Pro
  Adobe Design Standard CS4
  Sony Vaio

  I installed the latest vista updates today.  Three "important"; an option.  The optional parameter was an update of bluetooth toshiba.  We were talking about "platforms" that made me uncomfortable so I went to Microsoft and after reading it, I decided - based on little understanding - it was probably necessary.
  Shortly after, Acrobat 9 Pro wasn't working anymore. The computer asked me to restart after installing updates, but I have done a couple of things, including some e-mail.  During the attempt to send e-mail until I turned off the computer, Outlook flash he has been restarted and then the icon to install flash and then I could come back and type until the sequence started.

  I turned off the computer and when I rebooted, it did not start.  I managed to get it started; I run scandisk; now, when it starts to get a series of errors from Adobe for various Adobe programs that I installed on the machine all seem related to the "Automatic Setup" (or boot, I don't remember exactly.  I tried to re - install Acrobat and I get an error message that the 'source' is not available, and to ensure that it is - despite me using the installation disc, so I guess that it refers to the 'source' in Vista.  Outlook does not start.  He told me to use scanpst.exe to analyze the .pst files, but they seem to have disappeared.  I have tried other products of office except Explorer who started without problem.

  I can't use restore because it says that the disc is damaged and needs to be checked.

  Any ideas are appreciated.

  Uninstall the update for bluetooth.  Never use Microsoft device driver updates.  To avoid this does not happen, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/.

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.  Who can release the OS to do a system restore or other recovery options.

  Do you know when this problem started (probably with updates)?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  If none of these steps work, transfer your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in updating the questions will be more than happy to solve your problems.  Don't forget to tell them what updates you downloaded and installed, and what steps you have already done to try to solve the problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• System randomly crashes after installing the latest update of Windows 7

  I am operating Windows 7 OS on 64-bit pc. Since the automatic updates of Windows on 01/10/13, I experience a freeze randomly the system on a range of applications. I tried other updates and basic system maintenance tasks are completed, but the problem persists. Can you help me please?

  Hi Stuart,

  I see that the computer hangs at random after installing some updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. which windows update has been installed recently?

  Let us try these steps and check the status.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  Start the computer in a clean boot state, and check the status. A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Respond with more information so that we can send us your request in an appropriate manner.

• After installing the latest updates, my screen on large icons, screen too big for my moniter

  the only way of difficulty was to uninstall updates.

  After installing the latest updates, my screen on large icons, screen too large for my moniter the only way of difficulty was to uninstall updates.

  Sounds like something in the update causes a conflict with your video driver or change the resolution settings.
   
  The first thing to do to solve the problem is to try to install each of the updates one at a time instead of let Windows Update do several updates together.  If you're lucky, the problem can not ride again.  If so, you'll know at least update is the cause of the problem.

  If the problem persists, try right click on an empty area of your desktop and select properties to open the display properties dialog box.  Select the settings tab.  Look to see if the screen is correctly identified and if the resolution seems correct.  If you spot something wrong, change to the correct setting.  If everything looks correct, you can try to change the resolution to see if that can solve the problem.

  You can also check the website of the manufacturer of your graphics card to see if they have an updated display driver.  Updates of the operating system only sometimes work correctly if you have the latest version of the drivers for the various components.

  If all else fails, you can uninstall the update one that is causing the problem and mark do not show you this update again in Windows updates.   Doing so will be considered a last resort - especially if the update in question is one of the security updates.

• Phone crashed when installing the latest updated software

  I was download and install the latest update for my phone and it crashed.

  How to restore its functionality?

  Try to connect the device to your computer and iTunes and try to restore. What do you see on the screen right now?

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Cannot start after effects CC 2015 or first CC 2015 after installing the latest updates?

  First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code

  Hi Shawn,

  First CC 2015 and after effects CC 2015 stopped when I installed the latest updates on Windows Pro 64-bit 10. 0xc0000142 error code

  Update for Premiere Pro CC 2015 (9.2) and after effects CC 2015 (13.7) for a fix.

  Thank you
  Kevin

• The computer hangs after installing the latest updates

  I installed the latest windows updates.  Restarting my computer later, since hanging / freezing for half a second every 2-3 seconds.  I notice it more while trying to move the mouse or by watching a video (someone who speaks seems to stutter on about every 5th Word).  The computer clock has also been slowing.  He gets about 10-12 minutes behind before he catches upward.  When I look at the Task Manager, I do not take a lot of cpu.  Restarting the computer didn't help.  I've never had this problem before.  Any suggestions?

  Often by rebooting the computer solves an immediate problem.

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Hope this helps, Gerry Cornell

• I can't sync my iPhone 4S with my Macbook Pro more. It became a problem after installing the latest update.

  A couple of weeks ago, I upgraded my iPhone version 9.2 and iTunes on my Macbook Pro version 11.4, and now I can't get my iPhone to sync with my Macbook Pro. Whenever I connect the two devices, I get an error message that says: "the 'IPhone of John' iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. "

  I tried a lot of things, starting with resets hard and finally erase all data and settings of my phone, but without success. I would use an iTunes backup, but he refuses to communicate with my iPhone.

  Is anyone familiar with this problem? Thanks for your time.

  You you make sure that you run version 12.x iTunes on your Mac? If your OS x cannot run iTunes 12, you cannot synchronize your phone more set to update to iOS 9.x

• Lightroom CC instantly always crashes after installing the new update on iMac

  I can't start over Lightroom, and the summary of the following errors appears:

  Process: Adobe Lightroom [5073]

  Path: / Applications/Adobe Lightroom/Adobe Lightroom Lightroom.app/Contents/MacOS/Adobe

  ID: com.adobe.Lightroom6

  Version: Adobe Lightroom [1083169] (6.6.1)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Lightroom [5073]

  User ID: 501

  Date/time: 2016-08-11 21:07:04.000 + 0200

  OS version: Mac OS X 10.11.1 (B 15, 42)

  Report Version: 11

  Anonymous UUID: F91AA4B1-D299-6529-670E-6BA0CC1D67A3

  Sleep/wake UUID: 616F6B20-824F-4E73-9DE0-A2284363FEA6

  Time since started awake: 13000 seconds

  Wake time: 1500 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  "Reason for terminating app due to an untrapped exception 'LuaRunException',: ' AgPathUtils.getStandardFilePath: could not create the directory where the file exists: / Users/konradmeyenberg/Library/Application Support/Adobe/Lightroom"

  ending with an exception uncaught of print type

  Abort() called

  What can I do? Uninstalling LR LR CC reinstalling and restarting of the iMac (recent Version) did not help.

  Hi DdeGannes

  After installing 10.11.6 and reinstall LR and reboot: does not help same problem still present. Of course another reason.

  Must have something to do with the directory. If anyone can help? On my labtop, it works without any problem.

• HP's envy with Intel Core i7 processor: new HP Envy with core i7 crashes when you sign after accepting the latest updates from HP.

  My new HP Envy worked very well and the HP updates became available, so I accepted their. 85% of the way through the updates, I lost wifi capabilities and updates stopped. A message popped up that I needed to restart. I did it. It seemed he was installing the updates normally but then it just hung. I let it sit for probably an hour. I then had to force a reset to get out if the State suspended. When he returned to the top, he got to the login screen. After my password, it showed the circle of activity moving, but then after a minute or two, he went to a black screen with the exception of my mouse cursor. He never leaves this State except when I press CTRL-ALT-DELETE. If I select Sign Out, he is suspended in this State. If I click on the Task Manager, it goes back to a black screen and does nothing.
  I just bought this laptop at Christmas through Costco and use it for work. I've usually save it once a week or more. My guess is one of something foires HP updates. If there is a way to get to a point where I could go back, that would be great.

  Hello @Djpeckma,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your new laptop hangs when you log in after an update, and I'd be happy to help you in this case!

  To return your system to before the updates were installed, I recommend that you follow the steps in this document on using Microsoft System Restore (Windows 8).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Some of my programs no longer work after installing the new update from microsoft... can't locate the files server etc..

  Programs do not work and then MSO1033 and Outlook.NK2Outlook appeared on my desk and I wonder if I should find a way to put them where they belong and everything will work well...

  Hello Avalia,

  Please provide us with some information about the programs that do not work.

  
  With information available to us so far, you can run the restore to the date where the programs were working well.

  To restore the operating system to an earlier date, follow these steps:

  1. click on the system restore starts, type in the Search box, and then click System Restore in the programs list.

  2. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  3. in the System Restore dialog box, click choose a different restore point , and then click on Next.

  4. in the list of restore points, click a restore point created before you started having the problem, and then click on Next.

  5. click on end.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore if you want more information
   http://support.Microsoft.com/kb/936212/

   
  
  Please let us know if it helps.

  Thank you and best regards,
  Abdelouahab Microsoft responds to the technical support engineer

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• did someone had problems with lightroom 5 after installing Mac OS El Capitan?

  did someone had problems with lightroom 5 after installing Mac OS El Capitan? the images are well n the library but darken when I switch to develop fashion

  It's a shame that you did not check for problems before you can update your Mac

  First, see if the update to the fixed bug Mac 10.11.1 will help you

  -an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008

  -In ADDITION the need to update the drivers nVidia (links included in the message)

  -There is also 'a' mention of an another 10.11.2 bug fix tested by Apple

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

  -There is also a link on the video display problems in Premiere Pro

  - and many other programs... MORE Microsoft Office also has problems

  More official Adobe help pages listing problems Mac 10.11

  https://helpx.Adobe.com/Photoshop/KB/Photoshop-and-El-Capitan-Mac-OS-10-11.html

  http://blogs.Adobe.com/PremierePro/2015/10/Premiere-Pro-CC-and-Mac-OS-x-10-11-El-Capitan.h tml

  https://helpx.Adobe.com/Lightroom/KB/Lightroom-and-El-Capitan---Mac-OS-10-11.html

  http://blogs.Adobe.com/audition/2015/10/audition-CC-and-OSX-10-11-El-Capitan.html#.VjjYBtG raUk

• After you have installed the latest updates it freezes and blue screens or?

  I have installed the latest updates and it did not even to the part where he set up after a reboot.  Now I'm stuck in safe mode and no alternative.  Updates are not listed in the list of installed updates and I tried to do a repair of the system from the installation cd and I'm tempted to do a restore system since the day before two weeks before updates.  Nothing works.  Any suggestions will help!  I'd hate to reinstall because I have no backup support.

  Update: the event log has nothing in it to try to start safe mode.  If the problem occurs before the event log service was started.  I tried to uncheck all part 3 applications and services in msconfig.  I'm out of ideas.  Someone has everything?

  I said that I tried to do a restore from the day before and up to two weeks before the updates.  I actually found the problem and he had nothing to do with updates.  My crapped out video card and ATI Control Center was freezing at startup.  So I took out the video card and it starts perfectly.  Thanks for the help anyway.

• I installed the latest update of Windows. All updates. However, I find myself with the yellow warning icon in the bar of tasks and install when closing down.

  Description of the problem: a few days ago I installed the latest update of Windows. All updates, or so I think by the Windows Update Web page telling me so. However I find myself with the yellow warning icon telling me the KB2729450 update is ready on my computer and needs installation. However, the web page says that it successfully installed. I see the update in Add/REMOVE programs. I've deleted and reinstalled but still have the icon telling me to install it. Even when you turn off the computer the message is for me to install, but I think that it has already installed successfully. How can I get rid of these warnings?
  Operating system: Windows XP

  Hi depreciated,

  Thanks for posting in the Microsoft community!

  If I understand correctly, you receive a warning to install the update, even if it has already been installed. I'll try to help you the question.

  (1) did you make any changes before the show?

  The update that you are warned with seems to be question of the .net framework. I have you provided the link that will repair your .net framework.

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Note: after using the .net Framework cleanup tool, please install all .net Framework components.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.