Re: Problem installing CS6 asking to insert the disc, but install office

Similar Questions

• Qosmio G40-108 - prevent recovery of product disc ask to insert the disc

  I have a Qosmio G40-108 and it works fine even if the disc is not read discs any longer, perhaps because of a motherboard failure that I replace the disk with a new of brans and it still does not work, but my problem is the following... I have the product recovery disc, I tried to copy it to a USB key and reinstall the OS from USB and the start of software loading a page with the logo Toshiba asking to insert the recovery disk into drive F: I can't use is more like it's broken. How can I prevent the disc from asking to insert the disk into drive F:? There are lines on the laptop recovery disk to install the USB without using the disc?

  I managed to install a generic Windows Vista 32 bit downloaded from a Web site and my serial key works with it, but I really want to reinstall the original software
  P.S. Recovery of product is for Windows Vista Ultimate 32-bit and just in case there is also a serial number of the disk GMR400766ENG

  I don't have any experience with this, but I found an interesting article on creating recovery USB - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  Maybe you'll be able to create the USB stick recovery. Check it out.

• Why do I receive flag showing that I have a problem and insert the disc. but nothing shows

  Why do I get a red flaag showing I have a problem and to insert the blank disc aa, what I do, but the flag persists?

  Hello

  • What disk you insert?
  • What are the instructions?
  • How long have you been faced with the question?
  • Are there changes to the computer?
  • The problem is present in Safe Mode and clean the boot?
   
  I suggest you run the Analysis System File Checker and see if TI the problem still occurs. To do this, please see the following article.
  http://support.Microsoft.com/kb/929833

• In Vista, stop in to message asking to insert the disc for PSSWCORE.msi

  I get the following message on my computer asks me to insert a disk from PSSWCORE. MSI. HOW CAN I GET RID OF THIS ANNOYING POINT.

  JIM GUIDAS

  * original title - how can I get rid of PSSWCORE that opens? *

  Hello

   

  1. for how long are you facing this problem?

  2. don't you make changes before this problem?

  3. have you installed all of the software associated with HP that this file is linked to the HP software?

  If you have it installed then uninstall the HP software that is installed and then try to reinstall it and check if it works well or not.

  I suggest you to contact support form HP.

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/OJP-7680-psswcore-MSI/TD-p/31357

• How can I get my PSE6 to load? I tried to start over in re - insert the disc, but nothing happened.

  For some reason, my Photoshop Elements 6 stop working. It is still listed in my computer, but when I click it, it will not come to the top. I went to your site to help, but it goes back only to PSE7. I paid a lot of money for this program and I need it up and running again. Can anyone help, or do I have to buy a new Photoshop?

  Moved to Photoshop elements Forums.

• Request for emergency assistance. -CS6 adobe Master Collection - please insert the disc

  Our company has downloaded Adobe CS6 Master Collection for deployment on our image master this year.

  When you try to install using the files we downloaded and ran the disk hard that the installation said "Please insert the disk", it should not be necessary, as I already have all the files required to install on my computer.

  I need a quick fix to what I have to get this master image made and deployed next week or two and I have hundreds of machines to do on.

  It's a clean install and so there is no problem of compatibility with previous programs, I tried looking for installs it individual programs themselves in cases without success, I had a similar problem with the Autodesk products that I solved it by installing the trial version and then upgrade to version full immediately after installation. I have not tried that with this problem but I'm sure there is a better way to solve the problem. At least I hope there is. Please get back to me as soon as possible with this because I have to get this sorted out within a very tight timeframe.

  Hello ksatech,

  a first information please read this: Re: CS6 install question asking to insert the disc, but install desktop.

  Good luck!

  Hans-Günter

• I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  I can't install my Adobe Acrobat 9 Pro in my new HP Pavilion all-in-one computer desktop drive, because my new HP does not insert the disc in a disc drive.  What can I do to fix this problem?

  Hi edwards39572619 ,

  Please visit this link to download Acrobat 9 Pro:-download Acrobat 8 and Acrobat 9

  Let me know how it goes.

  Kind regards

  Christian

• When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  Hello

  Please visit the following link to download: -.

  Download Creative Suite 6 applications

• relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

  My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I ordered an online version of creative suite cs5.5. It installed on my desktop fine but when I try to install on my laptop it asks me to insert the disc?

  I ordered an online version of creative suite CS5.5 in 2012. Two days ago, my computer crashed. I was able to save the files on the hard disk, bought a new computer and installed CS5.5 on my desktop. has worked well. Now I'm trying to install it on my laptop and it asks me to insert the disc? I tried to call adobe support and they said that they have not been trained to answer questions about CS5.5 - and I would have to use this discussion forum. GRRRR.

  OK well I have a solution to my own question. I tried to install it on the USB and all I had to do was copy the folder on the desktop, and then install it from there. has worked well!

• installation of service Pack 3 updates problem, asks me to insert the disc

  during the installation of service Pack 3 updates the system asks me to insert the disc of 2002 from microsoft that I did not

  Full version update may request Office source files
  http://support.Microsoft.com/kb/840169

• I HAVE INSTALLED THE AIR COMBAT SIMULATOR BUT WHEN I TRY TO RUN IT, IT SAYS INSERT DISC. WHEN I INSERT THE DISC IT USUALLY ALWAYS OPEN

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Jewels38f,

  ·         What happens once you insert the disc (you get no error message)?

  ·         What version of Combat Flight Simulator you try to play?

  ·         What version of Windows is installed on your computer?

  ·         Have you tried the game from the disc itself?

  If you use Windows 7, then follow the suggestions below.

  Visit the link given below to ensure the compatibility of the version of the game.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator

  Do not start the game that is installed on your computer, instead of this insert the disc and let the AutoPlay option to start the game and will give you the opportunity to play.

  Check if this is useful.

  If you are trying to play Combat Flight Simulator 3 you may need to install it even in compatibility mode and check if that helps.

  To install the game in compatibility mode follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Before installing the game in compatibility mode uninstall the game. To uninstall the game, follow the link below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why he keep telling me that I have to insert the disc when I try to install Silverlight?

  I tried several times to install microsoft silverlight, but it always tells me that I have to insert the disc into the CD-Rom drive. I do not have the disk to Microsoft Silverlight, I try to download from Microsoft. Why he keep telling me that I need the floppy?

  Hi tntgee,

  In dealing with the problem in the installation of Microsoft Silverlight, I recommend you report yuour question in this help link.

  http://forums.Silverlight.NET/forums/

  
  Reference: Silverlight solution Center

  Hope the helps of information.

• drive hard printer - I inserted the disc to install the printer software, but my PC cannot read

  Installed a printer but when I inserted the disc that comes with it, my pc can not read.

  Hello

  ·         The computer will read other discs?

  Try to insert another disk and check if the problem persists.

  I suggest you run the Microsoft Fix tool of the web link that will help automatically detecting and fixing common problems below.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the helps of information. Please post back and we do know.

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.