In Vista, stop in to message asking to insert the disc for PSSWCORE.msi

Similar Questions

• Qosmio G40-108 - prevent recovery of product disc ask to insert the disc

  I have a Qosmio G40-108 and it works fine even if the disc is not read discs any longer, perhaps because of a motherboard failure that I replace the disk with a new of brans and it still does not work, but my problem is the following... I have the product recovery disc, I tried to copy it to a USB key and reinstall the OS from USB and the start of software loading a page with the logo Toshiba asking to insert the recovery disk into drive F: I can't use is more like it's broken. How can I prevent the disc from asking to insert the disk into drive F:? There are lines on the laptop recovery disk to install the USB without using the disc?

  I managed to install a generic Windows Vista 32 bit downloaded from a Web site and my serial key works with it, but I really want to reinstall the original software
  P.S. Recovery of product is for Windows Vista Ultimate 32-bit and just in case there is also a serial number of the disk GMR400766ENG

  I don't have any experience with this, but I found an interesting article on creating recovery USB - http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

  Maybe you'll be able to create the USB stick recovery. Check it out.

• Re: Problem installing CS6 asking to insert the disc, but install office

  When everything will install mastercollection between asking continue it.

  Please insert the disc AdobeMasterCollection6-EnglishJapan to continue (press subsequently again ask)

  
  

  
  

  I toal 3 drives c, d, e, all mastercollection software stored in the disk d... where I'm wrong please give suggetions
  

  Branch to a new discussion.

  Rameshk95808743 if you are be prompted to insert the disk during installation then please download a new copy of the Creative Suite 6 installation files.  The installation files for the Master Collection CS6 retail are available to applications to download Adobe Creative Suite 6.

  We invite you to update this discussion, if you encounter additional errors after downloading the installation files again.

• Trying to rip from CD the reader Windows (Vista). Player Windows keeps asking to insert the CD when the CD is already in the drive. CD is playable in drives E and F.

  Ripper Media Player (Vista) guard display the message "to begin to insert the CD in the drive audio."  Windows Media player does not recognize that the audio CD is in the drive. How do I solve this problem?

  Hi, BGNG,.

  1. were you able to rip the CD of Windows media player before with no problems?

  2. did you of recent changes to the system?

  You can read the following article to change the location of rip and see if it helps.

  Change settings for ripping

  Hope this information is useful.

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• installation of service Pack 3 updates problem, asks me to insert the disc

  during the installation of service Pack 3 updates the system asks me to insert the disc of 2002 from microsoft that I did not

  Full version update may request Office source files
  http://support.Microsoft.com/kb/840169

• I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  You have one something or other HP connected to the PC? Check the CD-ROM that
  came with it. Otherwise, contact HP support.

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  When I try to install the Premiere Pro CS6 I get the following message: "Please insert the disc AdobePremiereProFamilys6_mul to continue.  I have no such disc.

  Hello

  Please visit the following link to download: -.

  Download Creative Suite 6 applications

• relocation of cs5 or cs3 both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5 but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my

  My computer crashed and I tried to reinstall cs5 or cs3, both have been upgraded to d/l engraved on asked to insert the cs3 and drive 5, but he was already in the drive I installed to win 10. CS5 has already been installed and turn off before the attempt to re - install. I then tried my copy of CS3 same results. Then I tried CS2 it installs and works, but cannot activate online and the phone activation is no longer available it tells me to check the forums?

  First of all, that the software is old enough so that it does not at all with Windows 10... but

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I ordered an online version of creative suite cs5.5. It installed on my desktop fine but when I try to install on my laptop it asks me to insert the disc?

  I ordered an online version of creative suite CS5.5 in 2012. Two days ago, my computer crashed. I was able to save the files on the hard disk, bought a new computer and installed CS5.5 on my desktop. has worked well. Now I'm trying to install it on my laptop and it asks me to insert the disc? I tried to call adobe support and they said that they have not been trained to answer questions about CS5.5 - and I would have to use this discussion forum. GRRRR.

  OK well I have a solution to my own question. I tried to install it on the USB and all I had to do was copy the folder on the desktop, and then install it from there. has worked well!

• Why am I asked to install the updates for xp in my vista machine?

  At the risk of sounding really stupid... I dare ask this question: Why am I being asked to install the xp updates in my vista machine?  Updates are automatically presented, and the installation failed... After reviewing the updates that failed to install I noticed that they were all updates of security for XP and not vista.

  Thanks for your help!

  Hi Dutchie16,

  Please contact the Forum of Microsoft Vista.

  I read the question and by doing some research on this subject I think the update that you mentioned (kb 917150) and not (17150 kb).

  I see that the update (kb 917150) is an update of security for office XP. This is an update to the office application and not for the operating system. We need to check two things:

  1 > we do not have Microsoft office Xp installed in the system.

  2 > we did an update from XP to Vista.

  If 1 is true then please download the stand-alone office Xp update pack and install it. If the 2nd case is true then let me know because we have a different approach to solve the problem.

  The link for the standalone pack for office Xp:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=266c287e-A773-4d9c-9736-eeafb34ff893

  Please do not respond and so I can help again the resolution does not help.

  Kind regards

  Shaolin Roger Thapa

• I am trying to install itunes 9 on windows vista. Get error message - error occurred during the installation of Assembly political 8.0.microsoft.vc80.CRT, type version 8.0.50727.403 win 31 policy publicketoken = process 1fc8b3b901e18e3b = x 86 architectur

  try to install itunes 9, get error message - error occurred during the installation of the political Assembly 8.0.microsoft.vc80.CRT, version 8.0 (see above). Am able to install quicktime OK. I uninstalled itunes and quicktime, cleaned the installer, deleted the users temp directory and restarted several times - always get the same error and does not support network for apple, install

  Hello. It worked for me:

  1. download and install 7 - zip;
  2 right-click the iTunesSetup.exe icon and choose 7-zip > 'excerpt from iTunes\ ";
  3. then double-click AppleApplicationSupport.msi and install;
  4 install everything except iTunes;
  5. install iTunes;
  5. it must be .

• Sometimes then stops working and has an hourglass on the screen for a few minutes, how do I speed it up?

  Some sites... The hourglass flashes on my screen and load custom pages.
  It won't let me even scroll to the bottom of the page.
  Finally, I get the message...
  "A script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. »

  Is there something I can do?

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• HP Pavilion dv6000: ask an insert the HP Product Assistant Disk window whenever I start.

  I have started to repair Vista but decided that it was unnecessary and did not follow through with the help of the ERD.  Whenever I start, a window pops up telling me to insert the support HP disc in the CD drive. How can I stop it from appearing?

  Thanks to anyone who responds.

  Doug

  Hello

  Please follow the instructions.

  Honestly, I'm not 100% now, but we will test - it should be one of the following.

  Please, start new Autoruns (as admin). Be careful and find these entries - after uncheck them:

  + "HP Health Check Scheduler" "HP Health Check Scheduler" "Hewlett-Packard" "c:\program Hewlett-Packard HP health check\hphc_scheduler.exe" «2008-10-09 05:56 ' «»

  "HP Software Update", "Hewlett-Packard" "hpwuSchd Application" + "c:\program HP HP software update\hpwuschd2.exe" «27/04/2010 01:58 ' «»

  + "HP Digital Imaging Monitor.lnk" "HP Digital Imaging Monitor" "Hewlett-Packard Co." "c:\program Hewlett-Packard imaging\bin\hpqtra08.exe.

  + "Vongo Tray.lnk" "InstallShield" 'Macrovision Corporation' 'c:\windows\installer\{8c3ae2d1-854d-4650-a73d-c7cc7ee36b80}\newshortcut2_db7e00c96def489a8112d8f81614f45a.exe' «2007-01-19 23:15 "«»

  + "\HP" health check "HP Health Check Scheduler" "Hewlett-Packard" "c:\program Hewlett-Packard HP health check\hphc_scheduler.exe" «2008-10-09 05:56» "»"»

  + "\HPCeeScheduleForDouglas Depue" "CEEment", "Hewlett-Packard" "c:\program files\hewlett-packard\sdp\ceement\hpcee.exe" «23/03/2007 14:23 "»

  + "Com4QLBEx" "Com for application QLB" "Hewlett - Packard Development Company, L.P." "c:\program Hewlett-Packard HP quick launch buttons\com4qlbex.exe" «2010-01-12 07:53 ' «»

  One of them is probably related to the problem you see. Unchecking in Autoruns will prevent them from starting. Once you're ready, reboot your computer (restart, not stop and start again).   Please, report your findings, didn't this come back after that?

  Something unrelated to the original problem - I see that you have installed a software IOBit - these come with a very low reputation and the level of protection they offer is very low compared to competitive suppliers. In addition, they were taken to cheat and steal things propretiery by other sellers. Personally, I recommend you to uninstall them and replace them with something better like ESET, Kaspersky, etc...