Re: Qosmio F750 EasyControl Volume bar - lit or not?

On the EasyControl Panel between the two volume control buttons (+ and -) is a strip of the volume level. It is light, incandescent or it is just an idle figure? What is this for?
On the promo pictures I saw incandescent

For example [here | http://imageshack.us/photo/my-images/534/g2qosmiof750.jpg/] or [here: http://imageshack.us/photo/my-images/571/siqosmiof750completecon.jpg/]

But on my Qosmio isn't dark, no action or light - [photo: http://imageshack.us/photo/my-images/846/toshiba3dnotebookqosimo.jpg/]

How it should really work?

PS the same question is on the Mic logo on the front near card and battery lights.
Is this just a logo?

Thnx all

As far as I know just or + lights.
T is OK how it works on your Qosmio.

The same principle is on all other phones including my P500.

Tags: Toshiba

Similar Questions

  • Qosmio F750 - USB 3 G modem does not work

    Hello

    I recently purchased a Qosmio F750-11N and everything worked well.
    I can access any wireless internet access and all is well, except that I can't use any 3g usb modem.
    I don't have dsl in my home so I use 3g internet TMN with a usb modem external style pen.
    All my other toshiba to run the Internet very well without any problems.

    I insert the pen and the usual installer comes up, installs, PSI program and everything's fine. When I go to connect, it says usb modem unavailable. I have updated drivers and all. I have 64-bit windows 7.
    If I try to go to my network and try to activate the usb modem he says something on remote access does not. If I click on properties it says unexpected error.

    The usb modem is listed under the Manager.
    What can I do? Ask for details if necessary.

    Hi Renato

    Please don t get me wrong, but you probably know that Toshiba doesn't support third party hardware or software. All Toshiba in your case is compatible is the feature USB port and in your assignment is described clearly that the USB port is working.

    When possible try to contact your internet provider and ask for assistance. They have the best experience with own hardware and software, especially with the configuration of the software.

  • Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

    Hello

    Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

    If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

    Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

    Please could someone help or maybe post a link to a download mirror.

    Thank you very much.

    Hello

    First of all, it seems that the 8.1 win is not supported for Qosmio F750.
    So I might be difficult to operate BT

    However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

    This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
    Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
    The pilot of this system must be installed before the filter of BT driver.

    But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

    But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

    Good luck

  • Interupts my volume bar program

    Hey guys!

    Really hope that this isn't a repost. I searched all night but cannot find any solution to this problem,

    Well, the sound works like a charm and I havn't had problems so far, but there is something about the volume bar that I find quite annoying.

    When I'm full screen in games, movies, programs and so on, every time that I try to use my quickbuttons for computer volume settings me tabs in the program and takes me on the desk.

    Is there anyway to disable the bar so I can get rid of the problem.

    I really appreciate any help, thanks in advance!

    Basic computer Info

    Computer: HP Pavilion dv6 3016 so

    System: Win 7

    Hello

    You will need to uninstall the MediaSmart SmartMenu application and then restart the laptop.  A good alternative for a volume bar that will not throw you back on the desktop whenever you use, is at the link below.

    3RVX

    Best wishes

    DP - K

  • Qosmio F60: EasyControl bar no longer works after reinstall OS own

    Recently I did a clean reinstall of Windows 7 (64-bit), so miss me all the bundled Toshiba software.

    On my Qosmio F60 EasyControl bar no longer works accordingly (the buttons work again, they just don't have any effect on the volume, mute etc..).

    Does anyone know how to fix this?

    I guess that it may require simply download and install the driver from Toshiba, but I'm not sure that something is.

    Any suggestion would be appreciated.

    Hello

    What exactly do you mean by EasyControl bar?
    Do you mean the bar that appears just by pressing the FN keys?

    Have you installed the package of value added?
    If this is not the case, to do this.

    Pilots should be available on the European driver Toshiba page.

  • Qosmio G20 - blue Volume Indication bar does not work under Vista

    Hey guys,.

    would really appreciate your help on this. 2 days ago I decided to upgrade my laptop Qosmio G20 for vista (I know I don't need to hear all the problems of Vista, but I had to do). in any case, after a lot of problems (missing drivers, windows known glitches etc), I managed to get it up and running again. At least it's functions.

    All Toshiba equipment are missing because they are not compatible with vista. I found the drivers of replacement etc. and solved most of the problems. I have not yet solved the blue volume indication bar inoperative led, located just on the right side of the touch pad. It s simply stating an indication of fake volume and its not changing at all with any volume control. The green on the screen volume bar is also missing.

    Any of you have any idea how to solve the problems?

    Thank you very much

    Anthony

    Hello Anthony

    I assume that you have already noticed the Qosmio G20 isn t that supported by Vista. So I can believe you had problems to find all the missing stuff, but if the Vista works well now you should not focus on the little things.
    Exact managed and controlled by Toshiba designed tools and utility functions.
    If they are not available, I have gift opportunity see t to solve this problem.

  • Qosmio F750 - touch buttons does not work after Windows update 10

    I use a laptop Qosmio F750 (PQF75A-02Y00Q).

    Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

    As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

    The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

    Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

    My last question is, how can I fix this so that ALL keys work as expected?

    -----------------------------------------------------------------------------------------------------------------

    I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
    Curiously, all the FN key functions work well.

    In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

    Hello

    I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
    MY QOSMIO is PQF75E-F750

  • Qosmio F750 - 12 p / BD - RW Pioneer BDR-TD04A - Bluray discs will not play

    Qosmio F750 - 12 p
    BD - RW Pioneer BDR-TD04A
    Windows 7 Home Premium

    Problem: Bluray discs will not play. CD will play.

    History: I did a clean install of Windows 7 and then installed 60 all the drivers from the support site for this laptop model. Or at least those that would install. Interestingly, the driver of Toshiba Bluray would not install. the installation process stated "player not found on your system" or something like that.

    What works the device currently is a 2006 (?) Microsoft driver.

    Clues? It's the second Toshiba laptop, I had to (second-hand), and they both had this problem: DVD players do not play DVD right from the start. Very annoying.

    Update:

    The "Bluray driver" mentioned above is just the own DVD from Toshiba software. It is not a driver. And it does not find the optical drive Bluray on my laptop!

    - The Bluray optical drive will play DVDs, but not of Bluray discs. I'll borrow an another DVD Bluray at the local library, to ensure that it is not a disk failure.

    -The Wifi does not work ("network controller driver is bad / missing")

    - I probably deleted the hidden partition that contains the Toshiba "system recovery disk". I have re-installed Windows and written too. [You are supposed to press "0" when the power, but it does not show the Toshiba Recovery console. I scoured the hidden with a freeware Windows partition and there is nothing usable here.]

    It is a stupid economy, not providing a system restore disk AND do not provide drivers download work. (The drivers offered on the site are simply updated). It makes the laptop value much less long term and creates bad word-of-mouth over time.

    The only station I have is to buy a Blu - Ray external drive and perhaps a Wifi dongle. Crazy.

  • I can't install driver on my Qosmio F750-110 wireless

    My qosmio F750-110 has win7 home edition (64) but I have them upgraded to windows 8.1 but I wasn't happy so I desided to them downgraded to win7 profesional (64) and I put all the only drivers.the I can't get it market is the driver for wirelles and I don't know what to do.i tried to download tha driver drivers here but nothing happens.

    Please help me

    According to specification for laptop, your laptop Qosmio has Atheros WLAN + BT card inside.
    I do not know what you have installed and what is the status of the drivers in Device Manager, but all the drivers, tools and utilities that you can download driver Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp or portal Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

    When everything is installed properly you can use the WLAN connection when the wireless network adapter is correctly enabled and it can be done by using the FN + F8 key combination. It works for you?

  • Qosmio F750: Toshiba Blu Ray Disc Player does not play videos in 3D

    Hallo,

    I had to re set my PC and installed then drive Blu Ray Disc tosbiha and also Super D and XTune.
    Also also made installation with xtune.

    So now, I'm trying to watch a 3D movie it is not possible to play, the system displays only 2 parallel pictures.
    In the player, Miss me the 3D icon.

    I also installed Caberlink Power DVd V13. But here also no 3D film is projected...

    Does anyone know how to enable 3D in Toshiba Player or how Cyberlink Power DVD to work with this laptop...

    Thank you

    > If I try now to watch a 3D movie, it is not possible to play, the system shows only 2 parallel pictures.
    > In the player, Miss me the 3D icon.

    See this Toshiba document:
    [3D video content not displayed in 3D when you use the disc drive Blu - ray Toshiba on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm]

  • Qosmio F750 - glass free 3D 3D non-active

    I changed HD, first with the last drivers I could activate 1080 p 3d games I saw them in 3D.

    now I've changed my hd, I installed the drive recovery
    I installed the same driver version

    The nvidia control panel active 3D

    3D game does not start

    NVIDIA 3d test does not start 3D

    Xtune see 3D test

    Hello

    I guess you can adjust track settings by using the X-Tune: software.

    Here are the step by step instructions:
    [SuperD software X-Tune to adjust the 3D effect on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038D0000R01.htm]

    In addition to 3D games support (supported only in mode full screen resolution 1920 x 1080) on the Qosmio F750 4 following updates must be installed:
    (V8.17.12.9039 or later) NVIDIA display driver
    Super-D IC driver (V1.0.1613.809 or later)
    TOSHIBA drive Blu - ray (V1.01.299 or later)
    BIOS (V2.00 or later version)

    Please visit our driver download portal and select the corresponding model of laptop. Download and install the above updates. You can also update will be distributed via the Toshiba Service Station.

    _Source: _
    [Support for glasses free 3D mode for games on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038G0000R01.htm]

  • How to connect Qosmio F750 to 2 projectors?

    I have a Qosmio F750 and 2 DLP projectors,
    a connected via RGB output and the other connected to the HDMI output via a HMDI/RGB adapter.

    I've set up the Nvidia control panel with 2 projectors with desktop across 2 projectors,
    both the value 1024 X 768. And then start windows Explorer by selecting a JPG image side by side 2048 X 768.

    The image is displayed on the screen with the two images side by side, projected from a projector, and the other projector displays the computer screen wallpaper.

    I want to display the image on the left on a projector and the other image on the other projector.
    How I set up correctly?

    Colinmeth

    I think you need some 3rd party software to do this:
    For example displayfusion
    (www.displayfusion.com)

  • Qosmio F750 screen replacement problems

    Hi all

    I hope you can help me,

    I just replaced the display on my Qosmio F750 which unfortunately took out of warranty two weeks ago so I do not qualify for support.

    When I replaced the screen I followed all standard procedure to replace any screen,

    But for some reason, now, the screen didn't come on come (everything works when plugged into HDMI).

    There is no backlight or image on the screen, I tried mounting the old screen and that also does not work.

    Any help at all would be much appreciated.

    Thank you all,

    Gavin

    Hello

    Are you sure that the new screen is OK and compatible?
    The screen is connected correctly?

    I guess there is nothing wrong with the motherboard or the graphics chip because the external monitor seems to be OK.
    That's why I think that it s to display either a connection problem, or maybe you used wrong or defective.

  • Impossible to update graphics driver on my Qosmio F750

    Hello

    I have a problem. Can not update my graphics driver.
    I have a Toshiba Qosmio F750 with nvidia GT 540 m card.

    The latest driver is installed on your Qosmio Toshiba download page? I mean if you are using the latest version of the driver for Toshiba page everything is OK.

  • Qosmio F750 and always 3D images

    When Qosmio F750 will be supported the rest of 3D images?

    You have already created another thread on the same topic:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=68960
    Recommend you to follow the discussion on thread to avoid some misunderstandings

Maybe you are looking for

  • Engineering traffic graphic counter - iphone ios 10.0.1 problem 6 s

    Help, please The graph of traffic in IOS 10.0.1 meter is broken and not recognized. Y at - it an update for this application?

  • Filtration of single-point data

    Hello, I'm trying to filter the data of voltage point unique task, but there is an error of frequency... I have set at 120 Hz sampling frequency and I want bandpass filter for example of 30 to 40 Hz... So, where is problem? I tried to use a timed loo

  • AXC 603 g uw15 pc keep losing internet connection (wired) every 10 minutes

    Just bought this computer and connected to my smart TV. It is connected to both router. He keeps falling connection every 10 minutes or more

  • Upgrade memory for Pavilion dv7

    In October, I bought a Pavilion dv7 (model dv7t-7000) with 16 GB of RAM.  Is it possible to upgrade to 32 GB?  I also want to add an SSD as a second drive.  Is this possible.

  • use of OBIEE basic validation tool

    Hi allI explore obiee basic validation tool, when I tried to run the tool on my catalog, all active tests are running for the entire catalog.I want to just run all the tests for a particular shared folder, I saw a 'root catalog' item in the file test