Qosmio F750 and always 3D images

Similar Questions

• Qosmio G20 and Acronis True Image

  Hello

  I have a G20 with the media library and twin 100 GB hard disks that are configured to act as two separate discs (set up of RAID options when I reinstalled the system). I have programs on a disk (C) and the operating system and my data on the other (D).

  On a previous thread I asked to retrieve the C drive only from the recovery disks without wipe data on the D drive, and it seems that this is not possible, to remedy this, I decided to follow the suggested advice and create an image of the C drive for later retrieval if necessary. However, I have had a problem of creating an image or a clone of my system using Acronis True Image disk and wonder if anyone can help. I replaced the D drive with a new disk of 120 GB and uses the old drive in a USB enclosure sata to store the clone or image recovered.

  First of all, all devices, readers ext usb, wireless keyboard, cable network & second screen are connected through a hub to a USB docking station, and when I try to clone with this joint, it fails to restart. Undeterred, I took off the hub and the clone for the external drive seems to work very well. However, when I remove the drive from the existing system and replace it with the clone to test, it does not work. The system appears to start but then get the screen where it says windows windows had a problem and I want to start in safe mode, last known working system, or start as usual in any case. If I select it just reboots and gets back to this screen.

  Also, I tried to create an image rather than a clone and recover the image on the hot spare. Once again, it seems to go ok but when I put the disc and satrt to the top of the same thing happens.

  I don't know if there is anything that you must close before imaging or cloning as the instructions don't say, so don't know if theres nothing running that may affect it. The instructions are pretty basic but seem pretty simple, so I do not see where I am going wrong.

  Does anyone have experience of this type of problem and how to fix it.

  Thank you very much

  A few months ago I acquired a regular copy of Acronis True image for my G20.

  After that many negative attempts to use the program, who do not recognize the disks
  I asked for help using Acronis
  which solves the problem brilliantly, sending me a special version on purpose
  for the difficult features of the Qosmio system.

  If you an e-mail to the Acronis media, they probably have in the Archives of the version
  for the Qosmio G20.

• When "allow pages to choose their own colors, instead of my selections above" is not checked in the menu options, I can't see images on Web sites. How can I maintain with the box unchecked and always display images?

  I recently decided to spend autour colours in Firefox. I work in a fairly dark environment and have the dark color on white or light background text is quite difficult on my eyes in the dark.

  I changed the background to a dark gray, light gray text and visited the two and links not visited in a blue light. With these changes, I unchecked the "allow pages to choose their own colors, instead of my selections above" box.

  After unchecking the box, I'm more able to display images on many sites. Turn all grey images - as if Firefox has changed their image in part of the background. When I check the box, I am able to see fine pictures, however, Web sites typically return to their light background with dark text.

  Any help and assistance with this is greatly appreciated!
  Thank you!

  You can use the NoSquint extension to define the font size (zoom text/page) and colors of text on web pages.

  • NoSquint - https://addons.mozilla.org/firefox/addon/2592

• Qosmio F750 and external 3D monitor

  I can connect the infrared transmitter for use nvidia active shutter glasses and a 3D external monitor? like a 3D projector?
  How to install the transmitter driver?

  You want to watch 3D on a 3D monitor external content?

  NVidia 3D Vision allows you to watch 3D on external monitor.
  Details and requirements here:
  http://www.nvidia.com/object/product-GeForce-3D-VISION2-wireless-glasses-us.html

  Some models of Toshiba laptops offer NVIDIA® 3D Vision
  http://www.MyToshiba.com.au/support/items/FAQ/462

  3D Vision can operate with an internal LCD or an external monitor that support a Vision 3D via the external display port. When you connect the external monitor doesn't support 3D Vision, please disable the 3D Vision

  Here you can find info how 3D Vision can work on external monitor
  https://forums.GeForce.com/default/topic/571045/-tutorial-review-3D-vision-on-external-monitor-using-an-active-adapter-DisplayPort-to-DL-DVI/

• How to connect Qosmio F750 to 2 projectors?

  I have a Qosmio F750 and 2 DLP projectors,
  a connected via RGB output and the other connected to the HDMI output via a HMDI/RGB adapter.

  I've set up the Nvidia control panel with 2 projectors with desktop across 2 projectors,
  both the value 1024 X 768. And then start windows Explorer by selecting a JPG image side by side 2048 X 768.

  The image is displayed on the screen with the two images side by side, projected from a projector, and the other projector displays the computer screen wallpaper.

  I want to display the image on the left on a projector and the other image on the other projector.
  How I set up correctly?

  Colinmeth

  I think you need some 3rd party software to do this:
  For example displayfusion
  (www.displayfusion.com)

• How to display fixed images 3D Qosmio F750-122?

  How can I still images on Qosmio 750 - 122 (glasesless) logs?
  Photos of Panasonic Lumix camera 3 G.

  * Qosmio F750 portable free glasses 3D - content supported and software *.

  + Overview of current content and support the software on the F750 glasses free 3D Qosmio laptop. +

  http://APS2.toshiba-tro.de/KB0/TSB1A037N0000R01.htm
  + Fixed 3D images-> not yet supported but planned to be supported by nVidia 3D game +.

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Re: Image view 3D with 3D camcorder on Qosmio F750

  Everyone was able to see 3D on a glass Qosmio 3D Panasonic less system.
  I have a Panasonic TM900 and want to display 3D sound on my Qosmio F750.

  Photos of Panasonic are side by side, but there is a space about a cm between them so that the 3D standard do not overlap and we see a double image.

  Any suggestions?
  Thanx. Sander

  Hello

  Have you tried to ask the manufacturer of this camcorder support or details?
  I think that here in the forum you will find details and information how to use Qosmio F750 3D but I n t think anyone would be able to help you with this camcorder

  I googled a little bit and it seems that this camcorder 3D works in side-by-side method.
  So you need 3D TV (supporting side-by-side method), the 3D glasses and the HDMI cable.

  The Toshiba Blu - ray disc player supports the "Side - by - Side (LR)", "Side - by - Side (RL)", "Entrelacé (LR)" and "method 3D Interleaved (RL) so you can watch 3D Blu - ray discs but for as far as I know it s not for images 3D."

  Also check other threads like this one:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=256643

• Qosmio F750 - CUDA driver problem and display

  Hello

  I do computer scientist parallel with my Qosmio F750, but I am unable to run CUDA database test, called "bandwidthTest.exe". It returns the following error:

  cudaGetDeviceProperties return 35
  -> CUDA driver version is not enough for the version of the runtime CUDA
  ...

  I did some research on this problem, and everyone agreed that the driver of my screen should be updated. I already 290 driver version, but the latest version is 301,24. Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?

  What can I do to fix this? I don't want the certified driver for Toshiba... I want just a standard NVidia driver.

  Thank you for all the efforts made.

  > Why can't just install the NVidia site Web of NVidia drivers as I do with all my other computers?
  With computers, you mean laptops or desktops? I put t know where to work but I guess in your company or school where you work is THIS Department. Contact the people who work there and I hope they can help you with the explanation why you can't use the NVIDIA drivers.

  There is big difference between desktops and laptops. Desktop graphics cards are supported by the manufacturers of graphics directly, but on mobile units are mobile manufacturers.
  There are several reasons for this.

• Qosmio-F750-10N and Win8.1 - were not able to get the right BT drivers

  Hello

  Since upgrading my HARD drive and installing Windows 8 (.1), I was not able to get the right drivers for my Qosmio F750-10N Bluetooth.

  If I go through the section of drivers download site, the drop-down boxes of language and the region appear to be defective, so it shows me all the drivers.

  Tried to install a Toshiba Bluetooth stack generic but it doesn't seem to be able to recognize my Bluetooth device. Also tried to go through the Atheros website without much luck.

  Please could someone help or maybe post a link to a download mirror.

  Thank you very much.

  Hello

  First of all, it seems that the 8.1 win is not supported for Qosmio F750.
  So I might be difficult to operate BT

  However, AFAIK the Qosmio F750-10N was equipped with an Atheros AR9285 Wifi/BT card.

  This means that a single module shares the WiFi network and BT and you need to install the Atheros BT filter driver.
  Next to the BT filter installed, must install the driver of Toshiba system to win 8.1
  The pilot of this system must be installed before the filter of BT driver.

  But like I said: 8.1 win is not supported for this Qosmio unit and you won't find drivers Win 8.1 download section in the driver F750.

  But you should try the drivers released for the other, more recent Qosmio series; i.e. X 870

  Good luck

• Differences between P750/05F Satellite and Qosmio F750/02Y?

  Hello
  I was comparing the characteristics between the P750/05F Satellite and Qosmio F750/02Y but I couldn't really grasp the difference.

  My guess would be only from the outside, perhaps the screen?
  On the card in the Toshiba website says as the Satellite battery last up to 5.5 h rather than 3.5 h on the Qosmio for some reason any!

  On the 3D, I'm not sure as it is said by Satellite can also be used with glasses but Qosmio on an external 3D TV...

  Can anyone help me pls. I really want to get one of them soon.
  The Satellite is cheaper $ 100.

  Thanks :)

  I like the Qosmio series and I would take the Qosmio F750.
  It of great multimedia laptop and if you want to watch 3D content without the use of 3D glasses then the F750 should be your preferred device.

• Qosmio F750-10N - question on 2D and 3D display modes

  Hello

  I recently bought a Toshiba Qosmio F750 10N and it seems that she has two display cards and can support different resolutions in 3D and 2D mode.

  Is anyone aware of how go in 2D only mode to access a slightly higher resolution to 1366 x 768 capable 3D mode? None of the software control panels seem to be able to switch to 2D only mode in order to access a higher resolution.

  Of the product - the following internal video modes are supported: resolution: 2D mode: 1920 x 1080, 3D mode: equivalent to 1366 x 768

  Look forward to any assistance.

  Concerning

  Post edited by: neural

  Hello

  I agree with Akuma.
  Go to display properties.

  Make a right click on the desktop allows you to change the theme and the resolution of the screen.
  You can also click the Customize option after right clicking on the desktop and in the lower left corner, click on the option called display.
  You will find the ability to change the resolution.

  Notes; the 1 920 x 1080 is only available in 2D mode.

• Qosmio F750 - cannot get certain functions to work after 8 Win uprgade

  I have a Qosmio F750-125, PQF75E.

  Since I upgraded to Win 8, using Toshiba Upgrade Assistant I might add, I had a few problems.
  Especially not be able to get my Toshiba Blu - ray player to install.

  Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.
  The problem now is that the 3D feature do not always seem to work.
  When I open a 3D movie, I get only the image to view side by side, despite clicking 3D button.

  I tried to update the Nvidia driver (v290) to the latest version v314, available on the Nvidia for my graphics card, GeForce GT540M but whenever I get a message that the driver can not find hardware driver compatible. Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  However, 3D does not always work. I noticed that the face detection (SuperD Xtune) does not automatically start with the Blu - ray player when I start or open a 3D file to be read by the Toshiba Blu - ray player, it was.

  How can I get my Blu - ray player to replay my 3D correctly.
  If I open Xtune I am able to calibrate the 3D, and then it closes.
  I don't see an app under all the apps that seem to have something to do with the face detection function.
  Is there a setting that needs to be changed, an additional driver must be installed or what?
  I'm really disappointed with the support I received from Toshiba themselves on this issue.

  I also wanted to update the BIOS of my laptop.
  My bios version is 2 December 2011, but I noticed that a newer BIOS is available from the Web of Toshiba site dating back to February 2012, if I'm not mistaken.

  I downloaded but when I run it I get a message that my computer is not compatible.

  * Bleep *, it's frustrating.
  I want to recover my 3D feature and don't forget to run the most appropriate and most recent drivers at any time.

  > Above all not be able to get my Toshiba Blu - ray player to install.
  > Finally I managed, still haven't exactly how, but somehow, to install the latest version 1.0.0.5.70A.

  After the upgrade to win 8, you will need to contact the call center Agent for download of the Toshiba BlueRay player to win 8 valuation

  > Eventually leave in the update files downloaded by Toshiba Upgrade Assistant I managed to install the v306. However, I still cannot install v 314, after the "system check" I always get the message that the driver can find hardware driver compatible.

  Cannot install the nVidia page graphics driver by running the exe.
  If you want to install a driver from nVidia page, you need a folder that contains the driver to the driver files, and then you can update the driver through Device Manager by using the Advanced installation procedure.

  > I downloaded but when I run it I get a message that my computer is not compatible.
  You will find on the page of the Toshiba UE driver BIOS v2.0
  The update of the BIOS requires value-added package that must be installed before trying to update the BIOS
  Also, the system driver Toshiba to win 8 must be installed.

  If you will not be able to update the BIOS Win 8 running, you should try updating the BIOS runs only pre-installed Toshiba system Win 7.

• Qosmio F750 - 10 M: dosent work in 3D

  I jut bought Toshiba Qosmio f750 - 10 m and I can't understand how to enable 3d to see videos of the sample in 3d,

  Somehow when I play the video it only shows side by side and no effects its 2 similar photos.
  I tried to go back to the menu and activate the 3d side by side, but somehow the 3d icon that is in the image above is always gray (im using Toshiba default reader),.

  I noticed that when I want to read the content 3D camera isn t activate, but I know it works because I can use it for Skype. I spent 3 days to read all kinds of forums and reports and can not find solution :(

  Please help, I need to install software, what am I doing wrong

  > Somehow when I play the video it shows only side by side and no effects its 2 similar photos.
  I tried to go back to the menu and activate the 3d side by side, but somehow the 3d icon that is in the image above is always gray (im using Toshiba default reader),.

  Did you read that?
  + 3D video content not displayed in 3D when you use the disc drive Blu - ray Toshiba on the Qosmio F750 +.
  http://APS2.toshiba-tro.de/KB0/TSB1C038C0000R01.htm

  > I noticed that when I want to read the content 3D camera isn t activate, but I know it works because I can use it for Skype. I spent 3 days to read all kinds of forums and reports and can not find a solution

  As far as I know this laptop was not equipped with 3D HD camera, but only with a HD camera tracking and eye feature.

• It will never be a 3D for the Qosmio F750 update?

  Don't you think that it will always be an update for the use of 3D with games or other applications beside using Kevin screenmode and iz3D utility?

  I've heard rumors that Toshiba is planning something for the 4th quarter...

  > Do you think that it will always be an update for the use of 3D with games or other applications beside using Kevin utility screenmode and iz3D?

  + Qosmio F750 portable free glasses 3D - content taken in charge and software +.
  http://APS2.toshiba-tro.de/KB0/TSB1A037N0000R01.htm

  3D still images (planned to be supported)