Re: Qosmio G50-129 - black screen on startup

Similar Questions

• What the Qosmio G50-129 screen in single or double lamp

  The screen Qosmio G50 - 129 there single or double lamp in there?
  My screen has burnt (or the lamp has) so think about buying this screen off ebay

  item4154ec139d http://CGI.eBay.co.uk/New-LTN184HT01-18-4-Laptop-LCD-Screen-Dual-LAMP-/280597631901?PT=UK_Computing_LaptopAccess_RL&Hash=

  This will be compatible with the model G50-129?

  Thank you

  Hi mate:
  Please do not always start new threads on the same topic.
  Please follow this first thread to avoid misunderstandings:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=237001

• Need new inverter for my Qosmio G50-129

  Hello
  I have a laptop Toshiba Qosmio G50-129 and had trouble with the screen flickering and then going black. I guess it's a defective LCD inverter, but I can't find my type of model (G71C0007Y210) anywhere on the internet. The closest I can get is the models of G55 converter which is G71C0007Y510. Could you please tell me if this is compatible with the model G50 or where I can get hold of the correct inverter for my model?

  Thank you very much

  Hello

  Instead, I contact the service center in your country and get new inverter for your knees.

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  Don't think that someone can really help in this forum from a user to

• All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup

  All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup, no problems before

  Try to leave is SafeMode as shown here:

  Try safe mode if your Mac does not end commissioning - Apple Support

• Need of backlight for Qosmio G50-129

  Hello

  I'm looking for a backlight for my Qosmio G50-129, part No. LJ96 - 04043B.
  Can someone tell me where I can get this from?

  Thank you

  Hello

  I put t know how help you mate fact is that all parts can be ordered on ASP from Toshiba.
  If you are not able to find this part somewhere in the internet, then you should get in touch with Toshiba ASP in your country and the guy should be able to order this part for you.

  Good luck

• Qosmio G50 129: can it be used/accessed by other DLNA products?

  Hello

  I have a Qosmio G50-129. I am looking to purchase a DLNA Certified TV but wanted to know if the laptop is compatible DLNA so that I can access the contents of my Qosmio on the TV or if it was all I needed to do the Qosmio "DLNA compatible?

  The http://www.dlna.org/digital_living/product_types/#pc_frame site advises the following:
  "Personal computers (PC).
  One who has a PC knows that they have powerful network capabilities built-in. Thus, their DLNA Certified potential is determined only by the type of software installed on them.

  DLNA Certified PC are able to act as a Digital Media Server (DMS), Digital Media Player (DMP), Digital Media Controller (DMC) or digital media converter (DMR). Most of the PC available today start with be certified as a DMS, since many of us keep most of our digital content on our PC. »

  There is also a section of research and correspondence on the site that does not have my model Qosmio. This mean that I can not, or is there a solution/work around for this?

  Any help would be appreciated.

  REkha

  As far as I know that any PC with a NIC (Ethernet or Wi - Fi) can become a DLNA device by installing DLNA software. In January 2010 the DLNA started a software certification program.

  As far as I know Toshiba will offer the new application in the future and make it more comfortable to use DLNA. Must be an interface for Windows Media Player.

  For now, you can try to use the standard features of Windows 7 which should be available in Windows media player (supplied with Windows 7) 12.
  To be honest I don't have any other DLNA device and can not test it, but very quickly I want to buy DLNA player Blu - ray with integrated WLAN and want to have access to my PC and watch movies on TV but portable saved on HARD drive.

  So look for some info on the DLNA on Windows media player 12 service and see how it works.

  Please be so kind and inform us of this.

• My Qosmio G50 - 129 guard gal overheating, extreme

  I bought a Toshiba qosmio g50-129 and I got it for about 9-10 months.

  Now, whenever I play a game, it overheats and I get so far behind that he started 3-5 frames per second.

  This occurs every 1-2 minutes and lasts 30 to 45 seconds, it makes a lot of noise and makes my computer lag a lot.

  Is "broken"?
  I always he managed very carefully, never had a virus. I even formatted the C: drive to see if it the problem disappeared, he was gone for about 5 days, I only downloaded world of warcraft.

  What ive tried:

  Update all drivers.
  Close all other applications, all unnecessary processes.
  Graphic abseloutely reduction minimum.

  It has 512 MB graphic card, nvidia 9600 gmt or smthing.
  4 GB of ddr3 1 k mhz RAM memory
  2, 66 GHz processor. Intel core 2 duo t9550

  Hello

  What graphics card drivers did you use?
  You should always use the Toshiba graphics card driver since this driver supports protection against overheating!

  Last week, I read on the 3rd page of party that this original nVidia graphics card driver has been removed nvidia page because it caused overheating of the GPU
  I hope you didn t use the nVidia page graphics driver

  Second question;
  Do you use the latest BIOS?
  If this isn't the case, please update this!

• Qosmio G50-129 - can I have it with Blu - ray?

  I was looking for a laptop for a few weeks now and I fell on the Toshiba Qosmio G50-129. I had already seen the X 300 range, which had the quad processor, I prefer, but I did not like the colors of this laptop "boy racer".

  I thought that the G50 was a reasonable compromise - the high-end core 2 duo processor 800 GB of disk space and lots of features. Only two issues I have with this machine is the 32-bit version of Vista (why don't they provide 64-bit - I'll never understand this) and the lack of Blu - ray.

  Now, I'm not a fanatic of DVD or something else that I appreciate that the Blu - ray is the format that is there to stay. To this end, I have a small collection of DVD Blu - ray that I can play on my PS3 and my DVD Blu - ray player hooked up to my surround sound system.

  Can someone please explain to me why Toshiba produced this stunning notebook G50 - 129, but for A £1 499 it does not include a Blu - ray player? Are they crazy? I don't like that they have lost the race format by backing the wrong horse, I expect to get the Blu - ray on A £1. 5K laptop!

  Unfortunately, Toshiba you lost my business as a result of this omission. Too bad you didn't just accept that Blu - ray is here to stay and accept him as most of the other manufacturers.

  Hello

  As you know different notebooks from different manufacturers have different material combination.
  Is that Qosmio G50 doesn't support Blu - Ray player, but this machine has other benefits.

  It was equipped with the Toshiba Quad Core HD processor, that can turn ordinary DVDs in HD quality.
  So you can play DVDs using the internal player and you will get an almost the same quality as a Bluray drive.
  In this case you don't need to buy a new BluRay drive, but you can watch the DVD movies in HD quality!

  However, I searched here in the forum for similar and found issues these topics:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=39557
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=139719

  It might be interesting for you.

  Finally, I must say that I would not buy a laptop just because of the Blu - Ray player.
  For me it s more interesting a CPU, graphics card, RAM, because these are the parts that are needed for games, multimedia, etc.
  Of course, the blue ray player would be a nice extra but I have a PS3 too and it was already fitted blue ray player

  If this player is not really necessary for me

  Welcome them
  Jimi

• Satellite A305-S6898 - half black screen at startup

  I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

  Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
  I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

  I do not download anything on this computer other than basic messengers and photo editing programs.
  I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

  What is the problem?
  Anyone have any ideas as to what I can do.
  I can't really go back to the shop because they give only a grace period of 14 days for returns.

  > I had the same problem of a half black screen on startup.
  > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

  Doesn't look good for me it sounds a bit like graphic problem.
  Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
  I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

  If, after installing new check usability of portable and so similar issues still persists.
  If nothing will change it s is strongly recommended to communicate with an ASP.

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

• Satellite A100 - black screen on startup

  For two days my laptop Toshiba A100-495 / model-No. PSAA9E-18F047GR / Y6065357Q with Windows XP SP3 serial shows a black screen at startup. There is still no picture Windows startup.

  The laptop is all starting, but after finishing and be ready for use, the screen is always black. When I am pressing Fn + F5 keys, the desktop appears.

  The black screen is only starting cold after stopping, not awareness of standby or pause.

  > When I am pressing Fn + F5 keys, the desktop appears

  It seems that the display output is set to external monitor
  You see the Toshiba start screen if the laptop is connected to the external monitor?
  Check it!

  In addition, I am agree with Akuma BIOS should be the default value.
  To access the BIOS F2 press while turning on the laptop. I hope that you can do this then press F9 for default settings and then exit the BIOS save settings.

• B540 TDR and black screen on startup

  Hi all, I bought a B540 in April a power works fine until end of July when it began to show the error "display driver has stopped working and has recovered." a few days later I let him (I have need as a wifi station to connect devices remove) and after a few hours of work, when I came back, the screen was off and there wa no way to turn it on. I press the power button for a few seconds to turn off the pc and he died. When I turned on, the computer started but the screen is off (not the 'lenovo' logo was shown on the eve) but everything else seemed to work (play plug/unpluging usb external hard drive the sound of the carachteristic). I turned off again and wait ten minutes before the market again, this time above the 'lenovo' logo was shown, but it seems that the pc failed to boot win 8. I unlplugged everything, removed the power cord, wait an hour and after that all started ok but the error message "display driver stop" was still there. After this date the computer randomly starts ok or with the screen. Given that I do not use it intensively Isuspected some windows update to cause this strange behavior and I'm trying to use a point of restoration, until July 17, but the problem was still there. Then I removed all recent windows update of June on, and I realized that in one case, it was not possible (i.e. the "remove/uninstall" button not showed that KB). I googled around and found the subject KB has been reported to broken system and the only way to react was to use a DOS command to reatore a new installation of the system. I did and actually everything works ok for 2 days (one day, I actually use the PC all day to upload stuff to iternet it to work). Unfortunately, after that day, everything seems to repeat: new 'pilot not resposinding to display' and a black screen at startup.

  Please consider that the system is quite new and clean (only 3/4 months of life) and everything works fine until end of July. What do you suggest me?

  
  

• Power outage during Vista SP2 install; black screen on startup of the PC

  Hello-

  I have a PC desktop Gateway which is no longer start after a power failure has occurred during the installation of Vista SP2. The computer displays the progress at the bottom indicator, then, before that can display the login screen, the screen goes black, with a white cursor. CTRL-Alt-Del and Ctrl-Shift-Esc do nothing.

  I tried without success to the following:

  * Safe Mode/Safe Mode control guest - boots to black screen new
  * Startup Repair - told me there is nothing wrong
  * System Restore - tells me there is no available restore points
  * System restore the OEM DVD - can not find hard drive
  * Re-install this is disabled because I can't start Windows Vista-

  There are * all * options other than wiping the disc/lose all my data? The PC is in a remote area and backup drive is not an easy thing to achieve.

  The PC is no longer under warranty of the bridge, and I understand that Microsoft supports is no longer installs OEM of Vista.

  Can anyone help?

  Thank you

  -Andrew

  I can tell you how to make bootable disks, but you already have a disk.

  He has changed since good means of XP repair install from disk by booting from it.

  I would add that info to disk Bootable repair, just in case your DVD is a factory of one computer.

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  It's Vista only repair installation option these days.
  It must be switched on!
  Not much use, is it!

  Good luck with it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista Startup Repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• S7: black screen on startup

  S7, barely a month.  Order last night, left pending, lid and power cord plugged in.

  Today he won't move beyond a black screen at startup.  Starts with the start screen "Acer Explorer beyond the limits" and then just black.  However, I can see the pointer of couse to the screen and it can move with touchpad and mouse.

  I rebooted several times, power cord unplugged, etc..  No luck.

  Looking, seems I'm not the only one with this problem.

  Come on Acer, I dropped a lot of money on this machine!  Help, please!

  Here's how I fixed my problem as described in my original post (for now, anyway):

  Unplug the power apparatus.  Open the cover; computer will power on but go to black screen.

  Power off button on the side, but leave the lid open.

  Then, with (2) lid open (1) the computer turned off and unplugged from power cord (3), press and hold the power button / stop for 30 seconds.  Computer will be quickly implemented on and then turns off quickly (you'll see the Acer logo startup screen, but he died before entering the black screen).  Keep holding the power button / stop through all this for 30 seconds.

  At the end of 30 seconds, the computer will be (should be) off the coast.   Remove your finger from the power button / stop.  Leave lid open during all this.

  With lid open, connect the power cable.  Press the power button / stop as you normally would (you are not holding it this time) to turn on.

  Computer should start normally.

  Worked for me; It may be useful if you encounter the same problem.  I said that it has something to do with static buildup.

• Pavillion dv6 6b15ed: Driverupdate to fix the black screen at startup windows 10!

  Hello

  Question:

  Is there a new driver is released for my AMD Radeon HD card 6755 2? (double grafics)

  Because the latest driver causes a black screen at startup. Sequence: wenn turn on u see hp and that start-up logo win 10 after that it crashes on a black screen for about 2 minutes, then start 10. (about 2, 5 minutes later)

  I have now installed a windows 8 (issues) driver and windows starts in 6 seconds (with normal hard drive).

  I can't play the games but the bootspeed is good.

  So is there a fix or is there is 1 entry?

  TNX

  While the video card is not supported with the latest drivers.

  You can update as much if you want to, but isn't is not helping.

  Even in charge AMD said that this card is not supported with drivers.

  But today, I tried 1 times more, I used the old driver AMD_Display_13.352.

  With the first reboot, it was still black and some errors of the pilot, but after that the second quick start installation restarts!

  Appearance of the logo Windows 10 only 3 or 4 seconds and start immediately, without black screen and I got sound, video and video tube work as well.

  If other people having the same problem download Drivethelife and download the old pilot 13.352 and see for yourself.

  Make sure u delete all drivers previously installed with DDU (Display Driver Uninstaller) of guru3d site.

  Almost forgot: I also disabled windowsupdate to prevend install other drivers (new).

  Greetings