Re: Qosmio G50: How do I uninstall gesture controller

Similar Questions

• Qosmio G50 - how to set the fingerprint to log on Windows 7

  Hello

  just completely reinstalled my Toshiba Qosmio G50, windows 7 ultimate 32 bit and I managed to get my work of face recognition, but the utility of fingerprinting is in my head!

  So, I got to the point of uninstalling suite in Control Panel and Device Manager... Now, I went to the site of authentec and downloaded the driver and it opens once I have connected to windows m.

  I want this program to be accessible on my diary of opening on the screen but his does not. I m obviously something wrong... I don t really know what measures are required to achieve a return once more... any help would be awesome... cheeers...

  Thanks for your comments!

• Qosmio G50: How to clean the speakers under transparent cover?

  Hello

  In the transparent cover who are pregnant, they gathered dust and moisture.
  Can someone tell me how to get to clean;

  Thank you

  Hello

  I guess that transparent speaker cover cannot be removed separately.
  I think that it of a part of the top cover and I guess you will have to disassemble the whole laptop in order to get access to the speakers
  Simply said; It s not worth a try!
  Laptop disassembly is a very delicate procedure and I would risk any damage part only to remove some of the dust of the coverage of the speaker

• How to uninstall the Modem on my Qosmio G50-12 q?

  Hello

  I have a problem with the driver that is currently installed.
  How to uninstall and remove, permanently, the modem in my Qosmio G50-12 q?

  I need to have a modem recognised by Windows 7 because that whenever do unistall it, Windows, it found automatically. I have to do a new clean install.

  I deleted all drivers - c:\windows\system32\drivers\agrm.sys and all the LSI*.inf and all the folder in c:\Program Files\LSI, but Windows 7 found I don't know where. In regedit, it is not possible to delete several keys on MODEM LSI.

  Thanks for the care :)
  MarkRed.

  If you do not have modem, you must not uninstall it, just disable it in Device Manager and the problem will be solved.

• Processor Quad-Core HD Qosmio G50 and gesture of the controller error

  Hello
  I have a Qosmio G50 - 10v. For gesture controller request from the Toshiba.I site, I installed a gesture controller driver tried the English and German version, but for the Quad Core HD processor shows error. The message is
  like the following"Im Toshiba quad core HD processor Fehler aufgetreten ist. (CODE = 0X800A0100)
  Later, I formatted the pc and reinstalled the processor image driver and motion controller. When I open a Toshiba DVD player and watch DVDs, Quad core does not work and quad core shows 0%. So I watch movies with low definition.
  Please help me...
  How can I install the Quad core HD processor and controller of gesture?

  The "Toshiba Quad Core HD processor" gadget works when I've been upgraded / decommissioning or other video processing in the "Toshiba graphic Video Library»

  To check this, click on the red arrow on the left side of the gadget, click on "library graphic video Toshiba", right click on a video and select "vidéo Processing", then try and upconvert or downgrade a video according to what kind of video it is.

  Simple treatment should see the upper left quadrant the gadget turn orange or red while showing a percentage. Complex treatment, perhaps using one of the other programs in the menu drop down the gadget can do all four quadrants of the gadget actively processing colors/percentage of changes. I saw all active quadrant during certain functions of video processing. I've not seen it activates when not video processing.

  The program that you are running appears in the white box in the gadget under "request of race."

• How to enter the BIOS on the Qosmio G50 - 12 q?

  Hello

  I have a Qosmio G50-12 q PC - OS is Windows Vista 32 bit

  How do I enter the BIOS of the system?

  What are the keys to the press?

  Tank you

  When you start Notepad in the lower left corner you can find info which button must be used to enter the BIOS settings. I n t have Qosmio G50 and cannot say for sure, but try please ESC, F1 or F2.

  One of them should work.

• Re: Qosmio G50-10 t: How can I use the Quad - Core CPU Toshiba HD?

  Hello.

  And how you can use several Toshiba Quad Core HD processor with four RISC SIMD 128-bit processors in the Qosmio G50-10 t except that: enables support for H.264 encoders / HD / MPEG2 decoders, with functions for convert, transcode, navigate using the face (Face Navigation) detection and control actions. INJURY is not used!

  Maybe someone knows some software sales in which it could be used.

  Hello

  This Quad Core CPU is an additional processor that is not always in use.
  It was designed in the order using the main processor in some of the media process.
  For example, the Quad Core CPU works during the encoding or decoding of certain video standards. If you want to change it the standard of the video, the Quad Core CPU helps you complete this quick procedure.

  In addition, it improves the quality of the video (not HD). So, theoretically, you can view the videos in HD quality.
  Of course, you won't get the same quality as a film that has been recorded in full HD, but the Quad Core helps you improve the 576i pictures.

• Qosmio G50/402 - how use the 8 GB of RAM?

  I have a Qosmio G50/402 with 8 GB of RAM installed, even if the use is only 4 GB.

  Is it possible to use the 8 GB?

  Hello

  > How to use 8 GB of RAM?

  The fact is that if the 8 GB of RAM are recognized by the BIOS, if you Windows 7 OS recognizes the 8 GB of RAM, and then everything will run automatically
  You need Win 7 64 - bit to use 8 GB that s all you n t need to allow anything else

• How WLan antenna is installed in Qosmio G50 - 10H?

  I am trying to connect a D - Link DIR-855 to the build in WIFI Link 5100 G50 and impossible to get a higher connection then 150Mbps.

  According to v. pre - N antenna specifications at least 3 2.0 is necessary for longer range then 150Mbps.

  So my question is how much of the antenna has the Toshiba-G50 - 10 H. build.

  I guess that the Qosmio G50 - 10H supports 3-wire WLan antenna because the integrated card WiFi Intel 802.11agn ShirleyPeak minicards supports 802.11 Draft-N and it is a presupposition for this Draft N support.

  PS: in your case, I would recommend that you check the + device-> WLan card properties-> Advanced tab + if the project manager N and other settings have been enabled

• How to connect the Qosmio G50 for set-top box

  I just got a Qosmio G50.
  I am trying to connect to media player via my cable box.

  The manual says to connect via an rf cable.
  But as the signal is provided by cable SCART, of course, this won't work.

  Anyone has any suggestions as how work around this problem.

  Thanks in advance

  I agree with Akuma.
  Check the connections you may want to use a different connection.

  If you use an adapter, this could make problems.

• Qosmio G50-136 - how to turn on hardware virtualization

  Hello

  I have a Qosmio G50-136 with an Intel Core 2 Duo P8600, which is supposed to be YES to virtualization technology (intel VT - x) by intel itself ([intel | http://ark.intel.com/products/35568/Intel-Core2-Duo-Processor-P8600-3M-Cache-2_40-GHz-1066-MHz-FSB]).

  My problem is that no available through HWSetup bios settings refer to the hardware virtualization.
  So is it possible to activate it? I run mac os x 64 bit in vmware workstation.

  > My problem is that no available through HWSetup bios settings refer to the hardware virtualization.

  .and did you check the BIOS settings?
  To my knowledge, the VT can be enabled and disabled only in the BIOS.
  If these parameters is missing or not supported, you will not be able to turn the VT

• Qosmio G50 - 12F - how to enable VTx in BIOS

  Hello

  I bought a Toshiba Qosmio G50 - 12F 3 or 4 years. This computer has an Intel Core 2 Duo P7450 processor and is compatible with virtualization. I want to enable it, but y at - it an option to do this in my BIOS (it is updated).

  Can you help me please?

  Kind regards
  Groberto.

  + Please note: sorry if my English is bad: I'm french. +

  Hello

  > This computer has an Intel Core 2 Duo P7450 processor and is compatible with virtualization
  This does not seem right...

  Of my knowledge if the CPU support Intel VT, then this would be enabled by default.
  But your CPU Intel® Core2 Duo Processor P7450 does not support Intel VT - x and this is mentioned on the page of Intel:
  http://Ark.Intel.com/products/36734/Intel-Core2-Duo-processor-P7450

• Qosmio G50-12 q: how to disassemble the keyboard key?

  Where can I find pictures for the dismantling of the keys of Qosmio g50 related?

  Do you want to replace the keyboard or the simple buttons on the keyboard.
  As much as I know, you cannot replace or correct simple buttons, but you can only remove the keys

• Qosmio G50 - 12 k - how tv tuner to work in mode mpg4?

  My laptop is Qosmio g50 - 12 k, hybrid type digital (DVB - T) and analogue tv tuner.

  The fact is that television format to Cyprus where I live is changed is these days in the analog in mpg4.
  I need help or settings to make my tv tuner to operate in mode mpg4

  I use to watch tv on my laptop most of the time, I find it more comfortable.
  Please, help me to organize with settings for my tv tuner to work in mode mpg4.

  Hello

  I think that's not possible. In my opinion it is hardware related.
  As far as I know this laptop DVB - T + Analog TV Tuner support hybrid and the video format supported is MPEG2.

  Welcome them

• How to connect satellite decoder for Qosmio G50 using cable RCA video in

  I want to connect my satellite receiver to my laptop Qosmio G50 using the video RCA cable I got with the computer. (yellow, red, white RCA and one Jack)

  Could you help me where should I plug this cable that I have not found all the instructions in the user manual. (User manual list this cable on page 21, so it can be used for something somehow for sure!)

  (The decoder doesn't have a coaxial output, and I don't want to put another machine (eg. an old VCR) just to use a coaxial connection.)

  Thank you in advance for your help!
  Sandor.

  Hi mate

  I found your other thread on this topic and it seems that you have answered yourself.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44724

  Thanks for that!