Re: Question Mass Storage Controller

Hi dear smart heads of the Toshiba forum.

I need assistance with drivers for the mass storage controller.
I have expenses system connected on my PSAA9E, SP2 of XP with SP3 update on the windows update page.

I instaled all the drivers, as the content of the file and indicates the order of Installation, but there as always Mass Storage Controller under yellow flags in Device Manager.
What can I do to fix this?

Hey thanks for the comments. As you can see it is important to install all the stuff from the support page of Toshiba and also in the order of good facilities.

Tags: Toshiba

Similar Questions

  • Satellite A200 - Win 8.1: Mass storage controller yellow question mark

    Hello

    After the installation of win 8.1 in old Toshiba A200 - everything is ok except the yellow question mark in "Mass storage controller" in Device Manager. So the sd card reader is useless.

    Have an idea that is the driver for Win 8.1?

    Hello

    Please don't get me wrong, but I hope you know how old is A200. Even more recent machines are not supported for Win8.
    So, I can understand that you want to use newer OS on this old piece of hardware and if most of the stuff works pretty well, you should be satisfied.
    In this case when you use 8 years machine designed for Vista and certainly not taken in charge for Win8/Win8.1... who cares about SD card reader. You know what I mean? ;)

    Just disable the device in Device Manager and be happy.

  • Satellite A200 23W: XP-> Bluetooth question and mass storage controller

    Hello

    I have a satellite A200-23W and just installed Windows XP SP2 and the problem is:

    1. that i can't see the anyware bluetooth (I istalled the monitor bluetooth from the web site of the Union European toshiba)

    2. also, in Device Manager, I see that the mass storage controller needs new drivers but I can't find?

    Thank you

    Alex

    Hello

    With regard to the point;

    (1) the laptop supports BT certainly then have you installed Bluetooth driver too?
    BT monitor is a utility to control BT, but to use the BT, you need the BT stack!

    (2) this unit is probably the module of Robson former Turbo Memory.
    This material is only supported by Windows Vista.
    There is therefore no Windows XP driver.

    See you soon

  • Re: Satellite Pro U400-11V - mass storage controller

    Whenever I turn on the camera, I get the message "New hardware" about "mass storage controller".

    How can I fix it?

    Research on driver downloads is not one for this name.

    It's strange. I mean when a certain piece of hardware is correctly installed, it is done with the installation.

    A question: did you install your own operating system or what? Is when the operating system is installed with the Toshiba recovery image, this message will not appear.

  • Satellite M70: Need mass storage controller & card reader driver

    First issue: I want to (mass storage controller) driver.
    Second question: I have the card reader, but it does not work.

    First issue: what you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com

    Second question: I assume that the material is not installed correctly. For this you must install TI 5 in 1 card reader driver.

    If you cannot configure all this use please livery recovery DVD and install OS. After that it all works again.

  • Pavilion DV8225nr: Driver mass storage controller DV8225nr, left of the mouse doesn't work only and standby light flashing?

    Hello!

    1. get a yellow arrow in the device to other devices Manager > mass storage controller. Analysis of the HP online site can not find my computer. When I type the model as a DV8225nr, it is impossible to find anyone. I need a driver so I can delete this question mark. Properties > details > Device ID of Instance is PCI\VEN_104C & DEV_8033 & SUBSYS_309B103C & REV_00 / & 13826118 & 23 4A 4

    2. my daughter uses this computer then maybe via a combination of keys or switch or something (unless it comes to fail), the left mouse button does not work. I have to use a USB optical mouse. Any idea what I can look to restore full functionality of the Mouse/touchpad?

    3. during the night, I noticed that there is a blue light flashing motorhomes from this computer. I think it is when he goes to sleep. No way to stop this flashing?

    I thank everyone's help!

    Kind regards

    Leaning

    Hello:

    You need the driver for this device.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-43235-1&cc=us&DLC=en&LC=en&OS=228&product=1841885&sw_lang=

    Have you installed the driver for the touchpad?

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-48345-1&cc=us&DLC=en&LC=en&OS=228&product=1841885&sw_lang=

    If this does not work, I don't have any other suggestions for you, and I agree with your assumption that it's a hardware problem.

    Flashing light?  Stop the PC instead of letting it go in mode 'sleep'.

    There is no parameters do not have happens.

  • My 25 character product key is not recognized, as well as the mass storage controller is missing.

    two problems RY5U870-ImageSensor06 not recognized as mass storage controller is not found

    My 25 character product key is not recognized as mass storage controller is missing and a meesage RY5U870_Image Sensor06 is not compatible. I use a computer laptop sony vaio a dell windows vista Home premium 32 - bit boot disk that I got no problem other than the unrecognized product key it for activation of windows has never been made. I hope that I have ave explained it well enough for someone to solve these issues. Dale a lot thanks

    The question of activation is because you cannot use a Dell OEM of Windows version to activate on a Sony.

    The questions ImageSensor and mass storage controller are likely due to the fact that the Dell installation media is not the device driver appropriate for your Sony computer motherboard.

    J W Stuart: http://www.pagestart.com

  • Vista does not recognize the mass storage controller driver

    How can I get microsoft to recognize their own software and files show as my controller driver of mass in diagnostic checks and updates storage?

    * original title - BUG not installed mass storage controller driver *.

    I don't really understand your question. The mass storage controller driver is available from the website of your computer mftr. (if you have a machine of brand OEM like HP, Dell, etc.) and is included in the card mother/chipset drivers OR you would get the driver from site of the card mother mftr. If you have a generic construction machine. You don't want to update these drivers from Microsoft Windows Update in all cases. If you installed Windows 7 and that you have not installed these drivers, this is your next step.

    General information on the drivers:

    Never get the drivers from Windows Update. Bring:

    1. site of the device mftr. ; OR
    2. site of the card mother mftr. If the material is on board; OR
    3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

    Read the installation instructions on the Web site where you get the drivers.

    To find out what hardware is in your computer:

    1. read all documentation that you got when you purchased the computer.
    2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
    3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

    http://www.belarc.com/free_download.html - Belarc Advisor
    http://www.gtopala.com/ - System Information for Windows

    MS - MVP - Elephant Boy computers - don't panic!

  • Need drivers for Dell Latitude E6520 "Broadcom USH" & "Mass storage controller" Windows 7 64 bit

    Need the drivers mentioned above.  I installed virtually every driver available in the download for the driver page Inc. Control Vault and cannot get the two driver mentioned.

    Any help would be appreciated

    See security for the Unified Security Hub Broadcom (USH - probably a biometric reader / print) for the device that best matches your hardware:

    www.Dell.com/.../Latitude-E6520

    The other "mass storage controller"... go to Device Manager, right click on the device in question, properties, Details tab, change the drop-down list of hardware IDS and give me the VEN. and DEV ID (do the same for the USH device above if the related driver does not work).

  • BlackBerry Smartphones mass storage controller driver?

    Hello, I installed my bb desktop software and when I plugged my phone into the computer it doesent connect... After spending more than an hour with verizons 'tech', he said that he could not help me... I tried the update and install the drivers with no luck... my device manager has an exclamation point on the mass storage controller... im running windows vista... Thanks for any help in advance

    pntballg35 wrote:
    probably a stupid question... but from where comes the sd card into the computer? I do not quite see a small slit for him... and I don't think that my laptop has bluetooth... im sorry not very friendly tech... lol... Thank you for your patience and your help

    you will need an adapter and a player card that plugs USB.

    You can buy a bluetooth dongle in a local store or get one on ebay cheap!

  • Need for Equium A110-147 mass storage controller

    Hello. I have a satellite A110-147 running windows7 ultimate with 2 GB of ram and a 500 g hard drive.

    In other devices in Device Manager, I learned that my mass storage controller drivers are not installed. When I try to update the drivers, I am told that drivers could not be found on my computer or on the web.

    I would apreciate to help on that if possible please.

    Hey,.

    If you n t post the seller and IDENTIFICATION of the device it is difficult to say which driver you need

    Theoretically, mass storage controller could be linked to the internal card reader module. You can download it from the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com

    But I think that you must find for the Vista drivers as Equium A110 doesn t supports Windows 7, Vista only.
    And you must search in * Archives * driver download page because it s an older model. ;)

  • Satellite P200-1DY: need XP drivers - LAN, SM bus and mass storage controller

    I have a Satellite P200-1DY running XP - SP2. Where can I find the drivers for Ethernet, storage of buses and the mass of SM controller controller?

    Are they 'hidden' in one of the drivers in one of the driver for XP Toshiba site list?

    How can I identify what version of laptop I have: PSPB0, B3, B6, etc. ?

    Oh. I have already answered in the other thread you posted here in the forum;
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=117816#117816

    Seems you've discovered what series it is ;)

    PS: the SM bus and mass storage controller are communities which are only compatible Vista and so drivers don't exist for the XP operating system

  • Satellite M100 - driver for the mass storage controller

    Help, please. I don't get the hat of message I have no driver for my mass storage controller. I downloaded and re-downloaded the drivers of Toshiba. Microsoft found nothing.
    It seems to be bus PCI 5, device 6, function 2.

    Can anyone help (in terms laymans terms please). It drives me crazy.

    Thank you

    Hi Tellgio,

    What Toshiba drivers you have reinstalled exactly? I'm pretty sure that you don't have installed all the drivers because you always have a yellow exclamation point in Device Manager
    In addition, it would be interesting to know what operating system is installed

    I also had a yellow exclamation on mass storage controller and in my case it was a missing card reader driver. If you need to install this driver on Toshiba official site:
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  • Satellite M100 - mass storage controller can not be read

    Hey guys, I checked the wires and did not find all the discussions leading to it.

    I have a series of Toshiba Salellite M100 and realized that my mass storage controller cannot be read because I don't have the driver for it, and I have search endlessly trying to find this driver for my laptop. Its my memory card reader.
    I tried to look in my drive to restore but to no avail.

    Any help on this issue would be much appreciated!

    Toshiba Satellite M100 (MCLEV10ACP05) with Windows XP Home Edition
    T2300 at 1.66 Ghz

    Thank you for your time.

    Hello

    I think you need to find the drivers on the Toshiba site. ;)
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Download the driver for the card reader and install it.

    Good bye

  • Qosmio X 500 - mass storage controller - cannot install drivers

    Hi everyone, this is my first post.

    I tried to find an existing thread but without success.

    My Qosmio X 500 (PQX33A-06C02C) started running VERY, VERY slowly.

    I have run some diagnostics and found the following error:

    Device drivers are not installed (Code 28)
    Mass storage controller
    PCI\VEN_1217 & DEV_8130 & SUBSYS_FF501179 & REV_01\4 & 91e2 111...

    I looked in Device Manager and tried to update the drivers, who does not.
    I uninstalled the drivers and rebooted the laptop to try to force the discovery and installation of the device drivers /, who do not have.

    I drove by the drivers on the support page but can't seem to match one up with the details of the error.

    Now, my last resort would be to return the laptop to factory settings, but I would avoid rather than to I can, mostly because I don't know if it will fix the problem.

    Any help on this would be greatly appreciated.

    Thank you.

    PompeyFan

    Have you tried installing the Intel Rapid Storage Technology driver?

    Using the original installation disc of recovery this problem should be solved. Original recovery image contains all the necessary drivers and all hardware components must be installed correctly.

Maybe you are looking for