Similar Questions

• I'm trying to set up a second computer on my wireless connection. How to get my security code?

  Internet

  I'm trying to set up a second computer on my wireless connection. How to get my security code?

  http://www.practicallynetworked.com/sharing/xp_ics/

• I have a Dell Alienware with Vista on it. I use a Logitech wireless mouse. How can I disable the touchpad. I can't find information on it. Thanks, Bart long

  I have a Dell Alienware with Vista on it.  I use a Logitech wireless mouse.  How can I disable the touchpad.  I can't find information on it.  Thanks, Bart long

  I have a Dell Alienware with Vista on it.  I use a Logitech wireless mouse.  How can I disable the touchpad.  I can't find information on it.  Thanks, Bart long

  Hello

  Most Dell systems use the Fn + F3 keyboard shortcut to disable the touchpad. Click on the following link.

  Reference DELL disable or activate the touchpad by using access key: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&docid=424135&doclang=en&l=en&s=gen&cs

  Concerning

• HP5510 printer hung like a wireless network. How can I turn it go by laptop, on the stairs?

  I have a printer HP5510 hung like a wireless network.  How can I turn it go by laptop, on the stairs?  I always have to go upstairs % turn it on before printing wwill

  You can not, the printer must be turned on to make it work.

• Wireless HP printer-how can I change the status of the printer from offline to online?

  HaymarketRon, ever solve you this? I'm having the same problem...

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/wireless-HP-printer-how-do-i-change-printer-status/a0eae40a-9A86-4f64-ab62-851be21c0aa1

  Hello

  What is the brand and model of the printer?

  I suggest you try the steps suggested by Pinaki reducing replied on October 30, 2013 at the following link and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Windows-81-loses-wireless-printer-shows-the/46786f18-AC36-48A3-b9cd-c82db68d2a92

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I want to do a video opening and to redirect to another page after the end of the video, how do?  No matter what widget or code can do?

  I want to do a video opening and to redirect to another page after the end of the video, how do?  No matter what widget or code can do?

  Can do in muse and I tried to use dreamweaver like the code below:

  <! doctype html >

  < html >

  < head >

  < / head >

  < body >

  < style >

  {#video_background}

  position: fixed;

  Bottom: 0px;

  right: 0px;

  min-width: 100%;

  min-height: 100%;

  Width: auto;

  height: auto;

  z index:-1000;

  overflow: hidden;

  }

  < / style >

  < video id = "video_background" preload = "auto" autoplay no Cup >

  < src = "source opening.webm" type = "video/webm" > "

  < src = "source opening.mp4" type = "video/mp4" > "

  This browser does not support video

  < / video >

  < script type = "text/javascript" >

  {document.getElementById('video_background').addEventListener ('ended', function ()}

  window.location.href = ' http://www.xxxx.com';

  (}, false);

  < /script >

  < / body >

  < / html >

  adeletsang wrote:

  Thanks for your reply.

  I just need to click on "object > insert html ' muse and paste the code there?

  My video ID is video_background which is defined by the widget by default, I should change the code below:

  The site I posted has no video in there and I don't have the widget that Peter sugested however, you can replace the startup code Nacy O made (the black with bit blob going around it) and it should work... understand that a ve\ideo will have to be downloaded by your browser clients before they can see it, so it's another delay for them.

  The code you posted is the code of downtime and that seeks a DIV not called "intro" so no do not change his name...

  A mandatory opening text

  After 5 seconds, this block will disappear.

  Everything between the two div tags is startup code and replace you it with you video and then use the muse "object > insert html" tool to place on your page.

  The demo includes three bits;

  • the body or the div tag is the code shown above and goes into the tool "insert html".
  • a header code that defines styles i.e. the yellow background and text... cela goes in your location of metadata page

  

  • The final code is the timeout in jQuery you had but do not change the name to the background image unless you also change the name of your div to match... Nacy O put it in its footer code that is correct for DW, but Muse has no footer as such area so I used a master metadata slot to the same effect. The important point is that it descends UNDERNEATH other codes.

  Have a play with it and see how you go...

• I have a samsung s3 android. How can I print from my hp wireless printer? How to intsaller it?

  I have a samsung s3 android. How can I print from my printer hp DJ3525 wireless? How to intsaller it?

  Hello

  Please use the following application:

  https://play.Google.com/store/apps/details?ID=com.HP.Android.print & hl = in

  (Note: you printer must support this otherwise it will not work).

  Good luck.

• HP G60-630US notebook: Wireless Connection disabled - how do I reinstall the drivers for my wireless card?

  I think I accidentally uninstalled my drivers for my wireless card in an attempt to "clean" my PC of the programs that I use is no longer without realizing that it was a crucial driver I needed for my wireless connection.

  Where could I go to find the drivers to download and also how would approach I re - install the necessary drivers for my wireless connection?

  Thank you.

• Receiving wireless audio/video from Sony does not connect to my iMac

  Wireless Sony AV receiver STR DN 840 does not connect to my iMac so I can play iTunes it

  Which iMac do you have?

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

• best method to transmit the PPM (servo control) in series-wireless transmitter? (how to combine binary + whole in a single series byte)

  I'm pulling my hair out here... I hope someone can help to guide me in the right direction.  I'm just learning binary and hex, so please forgive me (and correct me!) if I say something wrong.  I have to give credit when it is deserved, because I use info from a post on theautochannel.com to drive this development.

  I try to control a small indoor RC helicopter using LabVIEW and a USB joystick.  I communicate with a transmitter wireless via rs232 (TTL converted), the Protocol is 125000, 8n1. Each image is 14 bytes 2 bytes of header.  I would like to transmit data PPM (pulse position modulation) which is actually just a 10bits (1024 possible measures) range that dictates the position of the servo, for each channel.

  Byte 3 & 4 are channel 1, byte 5 and 6 are channels 2, 7 & 8 CH 3,... and so on until the bytes 13 & 14 which is CH 6.

  Each pair of bytes begins with "00" (binary).

  Byte 3 & 4 should look like "00 00 00 xx xx xx xx xx", where the first "00" is the header, then "00 00" is the identifier of the servo, and 'xx xx xx xx xx' represents the position of the servo. The identifier is actually integrated in the position of the servo, the bits serve a double purpose.

  That's why it all will look like this:

  CH 01:00 00 00 xx xx xx xx xx (position has a valid range from 0 - 1023)

  CH 02:00 00 01 xx xx xx xx xx (range 1024-2047)

  CH 03:00 00 10 xx xx xx xx xx (range 2048-3071)

  etc... If you convert the binary range, you can see how the second half of the bits ID servo are provided by the range of servo.

  I intend by entry VISA to send every byte to constitute the entire frame, and then I will pause ~ 10ms between frames. However, my question is how the hell should I code this? !!  I think I need to write, take 1 CH for example, bytes 3 and 4 together into a string and then split them back hand to be sent as two distinct bytes.  However, I do not know how to mix my header and the first two bits of my ID servo, which is binary '00 xx', with my servo position (which I know I can write in decimal form, as entry VISA will convert it in binary). Any thoughts on the best way to do so, given all this?

  An empty string character likens to a binary "0"?

  Has totally confused everyone?  I really hope not, but I'm pretty tired so let me know if I need to simplify my question.  I hope someone can enlighten me as to the best way to combine the binary constant w modification of decimals (or hex).  And if anyone has thoughts about a good way to organize my vi together, I understand that too!  Right now I'll just use the structures of sequence... I post my code but at the moment, there is not much to look at

  Thank you very much!!

  No, you do not confuse everyone, but I think you might have confused yourself.

  You basically need to do is to create the array of bytes that will be sent, and then use the array of bytes to a string, so you can send it to the serial port. The creation of the byte array can be done in several ways. You deal with 6 16-bit numbers, of which the lower 10 bits are the values of the position of the servo. I don't know what you want on the front panel to look like, but if you have 6 separate (one for each servo) controls with each set having a range of 0 to 1023 (for 10-bit), then you just have to OR each value based on the number of servo. Put all this in a table, add the bytes of the header and the array of bytes to a string allows to get a string that you can send via the serial port. You can also do this in a loop. Joined a VI to show the two concepts. You have not indicated what version of LabVIEW, is 8.2 you use.

• Restart suddenly during the recovery of the video: how taking this action?

  I downloaded a movie from Hollywood on the Web and when I saw it on the media player - whenever it came to part - my computer suddenly restarted! I tried this three times and got the same result - a reboot suddenly exactly at the same place - as if there was a short cut. It played fine on my editing program - no error reported - and I fixed the problem by changing the scope of the problem, but I want to make at least an idea of how just watch that video could cause such a weird Marvel. Maybe something that has to do with WMP as an integral part of Windows?

  Thanks for any comments that you want to give me,
  Rob

  Hi Dr. - shi.
  in fact, the video card (more directly the pilot) is the most likely cause. Remember, a cause just the video driver is not a problem with a file does not mean that he will not be with each other. Without speculating too much, it's probably a dll file that needs updating through the video card drivers. I would suggest making sure your video drivers are up to date and your codecs. Do a clean boot, and rerun the film without any applications running in the background.
  Here are some links that should help you:
  http://support.Microsoft.com/kb/316992
  http://support.Microsoft.com/kb/331796
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=507
  hope this helps,
  Eddie B.

• On my dell Inspiron 6200, the hard disk had to be annihilated and XP Pro has been reloaded. Now the laptop is not wireless networks. How can I fix it?

  When wiped the hard drive and windows XP Pro THAT was recharged the cell seems no longer to see wireless networks. I have a netgear router and 2 other laptops accessing it. It acts as the laptop has the switch WiFi off, but it is not a. I need help!

  Hi WilliamBowman,
   
  -What version of service pack of Windows XP you are using?
   
  Method 1: Install the latest driver available for the wireless network adapter and check if it helps fix the problem.
   
  For more information on the update driver, see:

  How to manage devices in Windows XP

  Method 2: Follow the steps listed in the article given below to resolve this issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Note: The steps that are listed in the article are applicable to the other service pack versions of Windows XP as well.

• Extreme pro sandisk ssd on SCSI: how to check the status?

  Hello

  I have a SSD Pro Extreme Sandisk 240 GB on my system.

  I've seen it can be detected and status verified by the dashboard of sandisk.

  A big company like Sandisk, which looks very bad for me, because it's a very long time (YEARS) the dashboard does not support scsi controller detection and management.

  So, please let me know how to check and manage my SSD Sansidk in absence of decision-making in charge of your dashboard.

  I don't want to find problems after the harshness.

  Thank you

  ALberto

  Hi albedo.

  Unfortunately, these drives are designed for the SATA interface and some orders may not go through interaction SCSI-SATA, dashboard controls may be among them.

  In this case, you can check your statues in car with software or third-party tools and share the result with us if you have any concerns. Dashboard is an add-on software that comes with the player, but not mandatory to use, and it won't affect your use if you do not dash

• Card wireless Stick as a network drive?

  I apologize if this has been asked before.

  I tried to configure my 16 GB Stick wireless as a network Player Windows 10.

  The only problem is that he isn't report to the correct size, and I also get a weird error trying to move on all documents.

  I just wanted to do this for the sake of convenience, but I begin to think I still have to go through the web interface.

  Is there something I'm missing?

  

  Thanks in advance.

  This product does not support as a mapped network drive. WiFi access on a computer is limited to the web interface.

• I lost my music and videos how to make their return on my computer and my zune?

  our computer has a virus and when the computer man restore the computer, music and videos have disappeared how do their back, I can see them but they say I have to buy them back

  Hello

  What do you mean by you can see them, but you can buy them?

  and what do you by what they have restored the computer?

  If they have reinstalled vista read this

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive