Receiving wireless audio/video from Sony does not connect to my iMac

Similar Questions

• Why is my Apple - Super Drive CD does not connect to my iMac?

  Why is my Apple - Super Drive CD does not connect to my iMac?  That was before I upgraded to el Capitan.  Now it will not allow CD insertion and the icon does not appear on my desktop.  However, the device is displayed in the Finder and seems to rest for more than 15 minutes, try to connect.  Any advise appreciated.

  try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• Wireless LAN card Intel 2200 does not connect

  Hello

  I just bought an Intel Pro/series 2200 b/g.

  I installed the driver, and it detects the wireless network, but does not connect.

  I used the Intel and Toshiba drivers, but to no avail. My old card, the 2100 works fine.

  Can anyone help?

  Best regards

  George

  Hello George

  You cannot use Toshiba or Atheros driver for the Intel wireless adapter. This is known issue and I found an interesting topic about it.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4451

  I put t know what model of phone you are using, but it's obviously Intel and a 2200 wireless card problem.

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• Webcam from Sony does not

  With Vista, it worked after renaming a folder relative to a control of the camera bluetooth. I remember not out and I can't find a recommendation for Windows 7. I guess it should work by doing the same thing that worked with Vista.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My new helmet from QY8 does not connect to my iPad. Help, please.

  MY new QY8 is not tapered to my iPad. Help, please.

  Note:

  1before using the headset, please use the USB charging cable to charge everything first.

  2.pairing, press the power button on the headphones, you will see the flashing light blue-red, it will automatically switch mode pairing.

  3. If still cannot contact, please pluging in the charger cable to the headset Bluetooth, then connect to the USB port on the computer. To the loaded state, press the power button on the headphones until the red and blue lights flashing, remove the name of Bluetooth pairing. Finally, please contact your headset with headphones.

  4. make sure you turned on the bluetooth on your phone, model of research on this helmet.

  5. Select the Bluetooth model and click on connect. Enter the password or code 0000 if necessary.

  http://www.coulax.com/product/COULAX_V4_1_Bluetooth_Headphone_E257-4.html

• My iPhone does not connect to my iMac

  Hi - my iPhone 6 s connected perfectly with my mac through iTunes and load. So I think I've hit the setting do not trust and now it won't connect.

  I tried

  * cable and iMac load ports work fine

  the iPhone through a Plug and my MacBook Air costs

  * In parameters (sync iTunes) it says the iMac is not available

  * I have fed at the same time and restarted with the connected phone or not plugged

  * I tried to reset all settings - nothing

  * I tried to reset the network settings - it asked me if I wanted to trust the computer, he briefly loaded and then stopped.

  What I can do.

  Thanks in advance

  Connect via USB? If this is not the case, do.

  Barry

• photosmart HP b210a more does not connect to the server.

  I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

  Technical specification:

  iMac running Lion

  Mac Book under Snow Leopard

  iPad

  iPhone 3 g

  AT & T Uverse router

  Thanks to anyone who can help!

  The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

• Download videos from Sony Handycam; error: do not import because you don't have access privileges for the file to import

  Original title: Downloadinf videos from Sony Handycam

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  It is probably a permissions problem.

  Appropriating a file or a folder
  Add 'Ownership' in the context Menu for files, folders, and drives

• . Video AVI import does not correctly. Imports audio only.

  System: windows vista 64-bit

  Type of project: whatever the new draft standard is to the start screen

  Problem: I import files video .avi and they import audio only. It does not allow me to slide into the slot of the video on the calendar, and it only shows the speaker symbol in the media management area. This is the kind of funny. Previously, I used these files in another session June-July 2009, and they worked fine then. I'm lost and need help! (PLEASE!)

  Perplexed, like a fool

  If you look at the CODEC, it's Xvid version open source DivX, just as I suspected. These almost never work forward. The best workflow is to go before the Xvid compression (these are strongly compressed, lose a ton of data and quality), or to convert them to DV - AVI Type II with 16-bit 48 kHz PCM/WAV Audio files. I use DigitalMedia converter, but it is a shareware. Many users singing the praises of the Prism free to do the conversions. I've never used, but many here have and give it a very high rating.

  Note: no conversion program cannot recover this loss of data and quality. He is lost and gone forever. That's why my first option was to return before this compression is applied. However, conversion will produce files that can be modified both video and Audio.

  Good luck

  Hunt

  [Edit] do know not why/how they worked before. Usually, with the Xvid or DivX CODEC, you will get an error cannot import, or will get Audio or video only. I was never able to change any Xvid or DivX files in pre or PrPro - never, even once. I simply convert, if the client is unable to obtain the original source files, and I have even a diagram of loss of quality to show them how the film will look - not very good, IMHO. I make them sign on this loss of quality, before you start.

  Post edited by: Bill Hunt - added [change]

• My Mac Pro and HP Deskjet 3070 PowerBook does not connect via a wireless network from dorm

  Both my laptop and printer (an all-in-one) are connected to the same wireless network dorm, but they do not connect on it.  They connect only wire using a USB cable.

  I have for the MacBook Pro and the Deskjet printer IP addresses but no way to use to establish a connection.  I don't have access to the network router.  When I test the connectivity, the software tells me, "too many networks."  He can't make a choice!

  Interestingly, I have my MacBook Air along this journey, too, and the two MacBook have no problem of communication on the same network of dorm.

  Is it possible to plug these devices such as computers connect or should I remain attached to the USB cable to use my new printer?  I guess you know how I feel about this.  Thanks for your advice.

  You are right.  There is no way to bypass security protected by password and thus to connect a Mac to a Deskjet 3070 via a secure network without access to a router, and a password.  However, even without access to a network or a router, there is a workaround solution.  In my case, where the technical ability to correctly configure the router and the printer is beyond the understanding of the management of the dormitory, qualified through the difference to happen anytime soon, it is the answer I need.

  The solution is to build your own Mac + network printer and make it private, protect it against unwanted entry.  This offer you little mobility in the area of the printer, which is much better than nothing.  A sofa can be more conducive to creative thinking as an Office Chair.  The unconventional twist that Johnny introduced the user, the printer that generates the sender-recipient, not the Mac network.  Very smart.

  I refer you to the thread,

  "Deskjet 3070 cannot connect to the ad - hoc network (Mac)"

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/DeskJet-3070A-cant-connect-to-ad-hoc-network/m-p/1446819#M38598

  Then the only question is to know how to connect your Mac on the Deskjet 3070 printer via the generic (as he calls it, "ad hoc") network created by the Deskjet printer.  The Mac has abundant features for this purpose.

  Thanks for the categorical assertion, however.  No sense to break down the walls looking for a nonexistent hidden tunnel...!

• application of wireless network equipment, does not connect to internet

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with - does not connect to the internet, programs
  • Network hardware wireless of demand of error messages
  • Recent changes made to your computer - reinstalled windows
  • What you have already tried to solve the problem

  Hi Kavibala,

  Before you help out us, we need of more information about the issue.

  • Who is the manufacturer of the computer?
  • What is the brand and model of the computer number?
  • Have you installed the correct drivers for the wireless card?
  • You use wireless to connect to Internet or is it connected via Ethernet?
  • What is you receive the exact error message?

  However, you can access the links below and follow the steps to solve the Internet connectivity problem. http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Also, make sure that you have installed the correct drivers from the Web site of the manufacturer of the network on the computer device.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot import video from Sony handycam HD. start the button market orders / stop playback of the camera but no pictures or sound appear on the Editor screen.

  I can't import video from Sony Handycam HD 1080. Start button on the editor controls playback of the camera, but no image appears on the screen of the editor. Thnx

  andypfaris

  What version of Premiere Elements you are using and on what computer operating system is running?

  You doing DV or HDV firewire capture of data in a Capture of the first Hare elements window? What is your

  What is your predefined project?

  Is it a "it worked before but not now" show or "it never worked before"?

  Thank you.

  RTA

• Sony bravia 50 kdl50r450a does not connect with WiFi

  Hello

  I have my Hitron modem in the basement and a flight upward is my new sony bravia 50 kdl50r450a. I am able to connect via WiFi with my smart phone & top of the Tower in the same room but without any problem.

  I have this TV for a month and that once I was able to connect to the net via WiFi.

  I'm on Extreme and tested my speed and got 4 bars. It recognizes my name, modem etc. but sometimes the apps not loading even on the TV. Often, the PVR box updates and transforms itself that I have to activate manually again. This usually up the wide PIN too, I can see.

  I contacted my internet provider to test the speed which seems to be very well.  I put manually the PIN via a laptop computer to make sure that the two PINS of the TV and modem are put in correspondence. I unplugged the TV for 30 seconds.  I unplugged my modem too.  I can't get the net with the exception of a spinning ball.

  I tried internet apps... Sony browser... loading the Google page, but no keyboard can't. Each app gets a spinning ball or Try Again message?

  This set also does not recognize my .jpgs and my videos on my USB it recognizes all the smart features are completely unnecessary at this stage?

  Any suggestion would be appreciated.

  Thanks in advance!

  I have Sony KDL-50R550A and I have the same thing as SonyGal. I have only had the TV for a month and I've been able to access the Internet once and it was the first day I put in place. What SonyGal said was my same experience. I even had my cable company come out today (24/09/14) and reset on the router and updated for speed. It does not recognize the WPS, the signal is very strong, but does not connect. Only says:
  Device to wireless TV: found
  Local access: failure
  Internet access: failure
  I tried everything in the troubleshooting, disconnect, reset, prayer, etc. nothing worked. Someone please help...

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.