Re: Satellite A300D: winload.exe missing or damaged

Hello

I tried to make my system recovery using F8 and his works, but all of a sudden the battry during the operation failure.
So I repated steps again after I connect the charger but I couldn't, and I got the message...

+ Windows cannot start. A recent hardware or software change might be the +.
+ talk +.
+ File: \Windows\system32\winload.exe+
Status: 0xc000000f +.
+ Info: The selected entry could not be loaded because the application is +.
+ missing or damaged. +

And I have no recovery DVDs to ther restore dvd,
I need help to solve this problem, if there is an idea?

My computer laptop satellite toshiba A300D

Hello

You mean that you are not able to recover the laptop using the HDD recovery procedure?
You can begin the HARD drive by pressing F8, choose fix my computer.
Then a new window should appear and you could choose a new option called Toshiba HDD recovery.

If this is not possible then I think that you don't have a choice but to reinstall the OS using a Setup (Microsoft or Toshiba) disk.
If you don t have this disc then you order on this website:
https://backupmedia.Toshiba.EU/landing.aspx

See you soon

Tags: Toshiba

Similar Questions

  • Winload.exe missing or damaged

    Hello. I was working to clone my disk to a USB HDD (included). I think I can inadvertently done the USB HDD (empty; no OS) a boot disk. Now, I get the "there has been a change in software/hardware to the system; Winload is missing or corrupted"error and does not start for Vista Business. I can get to quick system via the Recovery Console, but it does show X: and doesn't let me change to C:. It does not show me the C: drive for repair. He asked drivers and try to give him the HARD disk driver, but he doesn't. Any chance to recover from this mess? All orders to make him watch C:? Thanks for your suggestions in advance.

    Resourceful salvation,

    This error occurs when one of the following conditions is true:

    (a) entry Windows Boot Manager (Bootmgr) is not present in the Boot Configuration data (BCD) store.

    (b) the Boot\BCD file on the active partition is damaged or missing.

    You can rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    (a) put the Windows Vista installation disc or Windows 7 in the disk drive, and then start the computer.

    (b) press a key when you are prompted.

    (c) select a language, a time, a currency, a keyboard or an input method, and then click Next.

    (d) click on repair your computer.

    (e) click the operating system you want to repair, and then click Next.

    (f) in the System Recovery Options dialog box, click command prompt.

    (g) type BOOTREC /REBUILDBCD , and then press ENTER.

    If the command success, please close the command prompt window and restart the computer

    The article below about how to rebuild the Winload.exe. It applies to Windows 7:

    http://support.Microsoft.com/kb/927392

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Winload.exe missing or damaged application

    Windows opens with the boot manager asks me to insert the windows installation disc reads the Message on the page windows file: \windows\system32\winload.exe status: 0xc000000e Info: the selected entry could not be loaded because the application is missing or corrupt

    PS: do not have a Setup disk

    > Ps: don't have a Setup disk

    That's not good.
    I think that the system or recovery disk is your last resort.
    If your laptop belongs to the European series of Toshiba you can order this disc here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Satellite A75 - config\system missing or damaged

    A month ago I successfully restored all the settings from the factory with the recovery cd for my satellite A75.
    Everything was working well until yesterday, I have received the \windows\system32\config\system missing or damaged.

    My laptop can not read the cd factory restore.
    What I do next. ?

    Another laptop home bed recovery cd I am comfortable that the CD is fine.

    Should my hard drive be replaced?

    Hello

    > Another laptop home bed recovery cd I am comfortable that the CD is fine.
    Seems the CD/DVD drive cannot handle the recovery disk I m not very well why, but you can try to copy this disc (burn on another drive) and then try to use the copied disc in order to restore the operating system.

    In many cases, this could help.

  • Windows 7 - > 8 - > 8.1 Upgrade winload.exe missing 0xc0000098 error after upgrade

    Hi all

    I have a Windows 7 Enterprise system that I've successfully upgraded to Windows 8 business. Next step must now go to Enterprise 8.1. The whole idea was to avoid the re-setup and well with Windows 8.
    The problem is that when I switch to Windows 8.1 it installs then boots. During the startup, it stops with an error winload.exe is missing for corruption. Code 0xc0000098. All of the keys in the same message results accept the option to boot another OS (F9 I think). It starts in Windows 8 and said he couldn't install 8.1 and that 8 has been restored. Of course, everything is back like nothing happened.
    If this can help:
    The system is a Dell XPS 15 with the eSATA Intel and an SSD.
    Thank you!

    Hello Vijay,

    Thanks for the reply. I do not end up understanding.

    For the benefit of third parties:

    Curiously, the ISO was corrupted. I say strangely because the ISO could be unpacked and burned on a DVD without errors. On a hunch, that I downloaded the ISO again, extract and it worked very well.

    Thank you

  • I'm unable to complete the installation of Windows Vista. At the end of the installation it says "winload.exe is missing or damaged.

    Hi my name is Corey and I have a huge problem. I have windows xp media center edition and I cant' install windows vista. When I turn on my computer with vista DVD inserted, it starts very well. When he arrives at the end of the section "Windows loading files", I get an error saying winload.exe is missing or damaged. OMG! what I'm doing. Help, please!

    PS: I meet well above the requirements for vista.

    original title: PROBLEM of INSTALLATION of VISTA! WINLOAD. EXE, MISSING OR DAMAGED

    Hi xXCAS93Xx,

    Thank you for using Microsoft Vista answers Forums.

    ATTENTION: make sure that u save your file before the following steps.

    Here are a few rare to get this problem is resolved.

    1. put the Windows Vista installation disc in the disc drive, and then start the computer.

    2. press a key when you are prompted.

    3. Select a language, a time, a currency and a keyboard or another input method, and then click Next.

    4. click on repair your computer.

    5. click on the operating system that you want to repair, and then click Next.

    6. in the System Recovery Options dialog box, click Startup Repair.

    7 restart the computer.

    For a complete statement on another option on how to resolve this problem, see this link

    http://support.Microsoft.com/default.aspx/KB/927391

    Please let us know if there is need help or if this solves your problem.

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • Cannot start Windows Vista - ntoskrnl.exe is missing or damaged

    Hello, I am running Windows Vista. When I tried to start today I got an error message saying the ntoskrnl.exe is missing or damaged and should be replaced. How can I do that I can't use my netbook? Im not a geek, any advice would be apreciated, thanks

    Hello

    1. don't you make changes to the computer before the show?
    2. are you able to boot to the desktop?

    I suggest you try the steps from the following link:

    Windows cannot start with the error of the ntoskrnl.exe missing or damaged when the keys are pressed at the start
    http://support.Microsoft.com/kb/2022960

  • help \Windows\system32\winload.exe file is missing or damaged

    Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM

    \Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.

    Hello

    1. what operating system do you use?

    2 did you change on your computer?

    Method 1:

    I suggest you to follow the links and check out them.

    Startup Repair

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

    Startup Repair: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    Method 2:

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

    http://support.Microsoft.com/kb/927392

  • Winload.exe damaged or missing (0xc0000221)

    Have been running Vista on a T61 Lenovo Think Pad for more than a year and just today (just a week after the expiration of the warranty), windows vista does not completely start.  I get the black screen with the following error:

    Windows could not start. a recent change in hardware or software may be the cause. to resolve this problem:
    (boot from the cd and repair windows) (actually doesn't say that, but that's what he tells you to do)
    File: /windows/system32/winload.exe
    Status: 0xc0000221
    Info: the file is corupt possibaly. the header checksum does not match the checksum calculated.

    I created a boot disk (since the manufacturer did not provide with the laptop) and was able to perform the repair (with no luck) and system restore (with no luck).  I can get in the quick c: through the startup disk and I ran the BIOS screen HARD drive diagnosis and it happened (so far... still underway).

    The manufacturer support told me that I needed to remove or replace my HDD and reinstall Windows which I can't believe would be the solution to this...

    Help, please!

    Thank you.

    Hello bayareapianoman,

    Thank you for visiting the website of Microsoft Windows Vista Community.    You can try one of the options are using the System File Checker tool.  From the command prompt type the following command and press ENTER: sfc/scannow

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite A210 - 4 1: Winload.exe problem after having used the product recovery disc

    Hello

    I could really do with some help here. I have a PC laptop Toshiba Satellite A210 - 1 4. Disk partitioned with Vista home premium service pack 4.0.

    Last night, I used the product recovery disc supllied with the laptop in an attempt to restore its initial configuration.

    and the end of the procedure, I find myself with a prompt cmd with X:\windows\system32\cmd.exe in the high bit blue box indicating:

    Error: imageX could not apply vista F:\05993xsp.swm Index 2 of ODD to C:\!

    Press a key to continue. Box disappears then an administrator: X:\windows\system32\cmd.exe in the top blue bit indicating:

    waiting for ODD vacancies...
    STRANGE drive f: loan.
    Look for support in the F: drive...
    Failed to initialize the raid class.
    No RAID - continue normally...

    X:\Windows\System32 >

    Now every time the laptop trying to restart it just comes up with the error message:

    CANNOT START WINDOWS. A RECENT HARDWARE CHANGE OR SOFTWARE MAY BE THE
    CAUSE
    FILE: \WINDOWS\SYSTEM32\WINLOAD. EXE
    STATUS: 0XC000000E
    INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
    IS MISSING OR DAMAGED

    Below I have then have the possibility of esc or continue with the same result of the system attempts to restart.

    The recovery disc has no option of repair on this subject.

    need help please, I have no idea.

    Thank you

    Hello

    Looks like something was wrong during the recovery procedure.
    Have you tried to recover the laptop once more?
    If this isn't the case, you should definitely try this!

    You are right; hasn t drive recovery option for the repair because the recovery disk is not the same as a MS Vista drive. The recovery disk contains image files (it s a package) and the files contains Vista, Toshiba drivers, tools and additional software.

    So if something was happening well wrung out during the recovery procedure, you will not be able to repair the installation of the OS, but you need to run it again.

  • Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

    I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

    The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

    Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

    You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836

  • Satellite L300-11V - system registry file is missing or damaged

    Need help, I have a laptop Toshiba Satellite L300D-11V, which, when turned on gives the message that the system registry file is missing or damaged.

    My problem is that when the first installation program, I did not back up files of recovery on DVD in the event of such problems like this, my questions are, is there any way around this without the recovery disk to reinstall Vista from hardrive?

    I can't find a way to do this or Toshiba will provide a recovery disk or a software download (for free or to buy) and it is the only option that is available to solve my problem?

    The laptop is still under warranty for another 11 months am I covered for the hardware/software in this situation he has taken over the shop I bought that they said they couldn't do anything without the recovery disk.

    Help, thanks in advance.

    Hello!

    You can reinstall Vista without the recovery disks. If want to repair your computer by restoring it to the original factory State, you can do so directly from the hard disk (press F8 when you start your computer, choose "Repair your computer"
    "and follow the instructions in the menu).

    Normally you had recommended to burn the recovery disk when you first start. There is a reminder that pop ups from time to time to burn the disc.
    Toshiba does not provide a software download, it is all preinstalled on your laptop.

    After the reinstallation, please create the recovery disk. If you need it and didn't burn this, you have to pay.

    Good bye

  • Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

    Hello

    I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

    After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

    I tried to uninstall the manually, but I got the same message.

    These programs are;
    Setup driver Atheros
    Toshiba hardware configuration
    Toshiba supervisor password
    Realtek High Definition Audio Driver

    So I can't go ahead with the upgrade.

    Anyone know what could be the problem?

    Thanks in advance,

    Pouvez - TR
    .

    Hello

    Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

    Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

    If you did a recovery facility before the upgrade?

    Welcome them

  • Satellite A60 crashes and restart the cycle - missing or damaged system32\DRIVERS\Ntfs

    I have a Toshiba Satellite A60, who has recently developed a serious problem and is currently blocked in a crash restart cycle. He started with the message "missing or damaged system32\DRIVERS\Ntfs", I've read about this problem on discussion forums, but am still unable to find a solution.

    Currently on start error messages appear indicating a driver is missing or damaged, the Toshiba start page has vertical lines of missing data and on a few occasions it will fully start after a short period of time vertical lines appear on the screen and it crashes.

    I tried a number of bugs:
    * Re installed windows XP pro (formatting the hard drive and renew the partitions)
    * Update the bios on the site of toshiba in version 1.90 (I think that the update also flashes the bios, but would need this confirmation?)
    Swapping the hard drive with a portable, yet no longer starts and HD works fine in another laptop, dismissing the possibility of missing or corrupt files.

    I realize that this could be a problem with the RAM and think that the laptop has 512 fixed to the motherboard, accessable without stripping down, but do not know how to determine if the RAM is the problem. While trying these fixes, I get problems with the start of the player and can only get the disk to launch and recognize the CD about 1 to 10 times.

    Could someone suggest a remedy or a fix I can try? or suggest how they fixed a similar problem. Thank you very much

    You ssounds not very good ;(description
    The hardware malfunction appears to be responsible for the vertical lines on the screen
    If vertical lines appear also an external display, the jury may be wrong.

    You re right, I Googled, and it seems that Sat A60 supports an internal memory.
    As far as I know, this memory cannot be removed and only an electronics could solve this internal memory.
    But are you sure that the internal memory is impaired. The device supports only 256 MB internal memory and other modules are removable
    If you can try to replace

  • Windows didn't start because the following file is missing or damaged: _ < root Windows > \system32\ntoskrnl.exe.__Please reinstall a copy of the above file.

    Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:

    \System32 \ntoskrnl.exe.
    Please reinstall a copy of the above file.

    I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information.

    can any1 give me a simple cut down on what to do (step by step).

    Thanks in advance.

    Hello Jamdutch,

    Thank you for your message.  Click HERE for instructions to perform a repair of the system installation.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for