Re: Satellite Pro L450 - FN + F8 key combination does not

Similar Questions

• Satellite Pro L450: Wireless card missing or did not exist

  Hello, pls I need help

  my lap is toshiba satellite pro L450 suddenly I don't see the wireless card I check the bios and find this option is turned on also update the bios and the problem still exists and there is no card in Device Manager
  the light wireless always off I do not know what happened? and the function keys Fn + F8 doesnot work I install add package and this doesnot solve the problem

  My guess is that just failed your wireless hardware.

  Windows does not display the device driver if it does not find the hardware.

  See this thread where I make various suggestions and tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65938&TSTART=0

  Probably the best thing to do is to buy a USB Wireless Lan.

  Post edited by: badhat

• Satellite L650: With the FN key combinations do not work in W7x64

  Hello

  System
  

  Satellite L650-1KU

  Part number
  

  PSK1LE-01700MRU

  
  I have install Windows by myself - this laptop don't have any operating system from the factory.
  Installed Windows 7 x 64, all drivers and utilities site driver Toshiba for windows 7 x 64 available for my laptop model.

  I have no any unknown device in the Windows Device Manager, all the installed drivers and all hardware components woks fine i.e. camera wifi or bluetooth or web.
  But I still can't use some combinations of keyboard with the key Fn. not all, only five combinations do not work: modes of energy Fn + F2 Fn + F4 hibernation, Fn + 1, 2 zoom and devices wirelles Fn + F8.
  Search, I found only mentions on Fn + 1, zoom 2 - this funtion providing some util named Toshiba Zoom but no any Toshiba download page don't Zoom for my model of laptop and W7.

  Looks like it must have installed some additional tools provider for the manipulation of this combination, but I can't find any soft or extra info on the driver download page.
  Maybe there are a few utils which must be placed in lists of drivers/software for 32-bit windows and it will be very good for 64 bits one?

  All the combinations that works great as volume + Fn + Fn + 4 3 or mute Fn + ESC does not show any popus time of pressing, just functions without any indication.

  Dear users and support, can you help me what should I install utils extra to support the Fn + F2 modes of energy combinations, Fn + F4 Fn + 1, 2 zoom hibernate and Fn + F8 wirelles devices?

  Post edited by: Gimli_r

  Akuma is right. For the feature keys FN, you install Toshiba Value added Package. This package contains several different applications.

• Satellite A40 - 231 - Fn + F6 and Fn + F7 key combination does not work

  I have toke my cell phone to a technician for formatting.
  However, when I tried to adjust the brightness of the display by pressing Fn + F6 or F7, it does not work.

  This function does not work on my laptop.

  Advice please?

  Thank you
  JAMA

  Hello

  Go to the page of European driver of Toshiba.
  He chooses;
  Archives of the series Satellite Satellite has Satellite A40 Win XP

  Now, you will get all the Win XP drivers for this laptop.
  You must install the common Module in first, then the energy saver.

  Check it!

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite Pro U200: WLan Hotkey Fn + F8 does not

  I can't the keyboard shortcut (Fn + F8) working on the Satellite Pro U200 wireless. It worked before, but after that I reinstalled the system and drivers, it no longer works. Any other combination Fn + FX work very well.

  If the wirelles (on the right side of the laptop) switch is off and you press Fn + F8, the system displays the following message: "wireless communication is disabled. Please activate the wireless communication switch. "If the wireless switch is enabled and you press Fn + F8, nothing happens (whereas before I was able to activate bluetooth and WiFi card and turn off).

  I don't know, but I suspect that the keyboard shortcut no longer works after update BIOS version 1.2 to version 1.3, but I can't confirm this, because I can't downgrade the BIOS and I reinstalled the system, shortly after the update of the BIOS. Do you have any ideas please?

  Thank you for your help,

  Jiri

  Hello

  It has worked before, because you used the preinstalled recovery image that contains all the necessary tools and utilities. If you install own OS please consult document instructions facilities and check if software list is missing. You can also use the Tools & Utilities CD and install all stuff on the left. This way you will have perfect configured unit.

  Anyway, check it please if you forgot to install Wireless Hotkey V2.0.0.6.

  Good bye

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Satellite Pro 6050 - out port (RCA) TV does not work XP

  I received a Satellite pro 6050 which had Vista installed on it, I downgraded it to XP, but the port RCA no longer works (worked on vista).

  Can anyone suggest a solution?

  Thank you

  Hello

  > I have the display mode to extend the desktop on the second monitor, and I think it sends the output SVGA mailed rather than the TV output
  This could be the key; try to use the FN + F5 keys until you have to spend on TV and not on the external monitor.

  Good bye

• Key combination does not respond before the start

  Hello. I have a macbook pro 13 "2015 retina.

  The problem I have is the same as the title, but it's not regular "choose the appropriate settings startup disk' because I tried already several times.

  Mind you, none of these problems remain once Mac OS startup has finished, it is just the period prior to initialization.

  Here is the list of problems.

  1. There is a very long period of black screen (backlight on) between the startup sound and the apple logo appears on the screen.

  2. start after key combinations take a long time to register. For example, 'boot disk selection window' takes more than 2 minutes of waiting. I have to wait while pressing the option key. It also applies to enter recovery, reset pram, entering the diagnosis, enter safe mode, etc..

  3. once I finally get a function running, there is a delay of keyboard/trackpad. Interactions appear unusably slow on Boot Disk selector and Internet Recovery(wifi selection). Trackpad responds a minute after I hit, it is the keyboard.

  4. There is no wifi signal on Internet recovery for about three minutes (my hotspot is 5 cm behind my mac).

  To sum up, it feels like the processor is clocked at 5 Mhz or something.

  Here is a list of what I tried.

  1 reset the smc, pram

  2 reinstalling Mac OS

  3 internal SSD flash disk formatting and installing Mac OS

  4. remove the boot camp

  5. remove the magsafe

  6 safe mode (no matter, because I do not think it is related to Mac OS anyway)

  I have no external devices or readers, all that is present is the magsafe.

  I always have Apple Care has left, so feel free to tell me if you think it's a hardware problem. Thank you for reading, and I appreciate your help.

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Satellite Pro A300 - 1 H 2 - Windows does not recognize the HARD drive

  Hello

  I'm a newbie, which has probably asked bin before so if You ' l excuse me, I have a satellite pro A300 - 1 h 2.

  I got the volume of unmountable boot blue screen, then tried to adapt to a new samsung drive. I put in my windows disc it will load all the drivers, then says that there is no hard drive?
  In the bios, it recognizes it?

  Thanks if anyone can help

  Hello

  The problem is that your laptop supports the SATA HDD controller but the system OS does not contain the SATA drivers
  You can assign in the compatible SATA mode BIOS.
  This allows you to install the operating system without installation of the SATA drivers.

  Welcome them

• Satellite Pro P100-465 CD/DVD drive does not.

  My Satellite Pro is new and I was very happy with it until I started one day find my CD/DVD drive not recognized.
  Initially that the drawer does not open yet, it does now but only after a few presses the eject button. When I put a disk in it spins and the drawer light flashes briefly, but then nothing?
  The CD/DVD drive is not displayed in Device Manager is?

  Can anyone help please?

  Hello

  I'm not an expert so take what I say with a large pinch of salt and check again! I have a similar problem with my A100 except the works of CD tray very well but the machine will not play some DVD and won't play any CD several people have suggested that download ITunes affects your registry files and shortly after that the machine does not recognize the CD/DVD driver.

  The error message that said something like: "i/o device error".

  Have you tried to download a new driver? I have that have not yet done and came here to seek to verify this info myself.

  Anyone else heard about Itunes affecting your laptop in anyway?

• Satellite Pro U400 - sound of the wheel does not work anymore

  The wheel of sound control in my Satellite Pro U400 works not properly since last month.

  Now, I have to use the volume bar in Vista to adjust properly. When I try to lower the volume by turning the wheel, as I did before, he constantly increases the volume after reducing to a few percent. If I flip it is very very slow, sometimes it decreases the volume a little, but other times it increases. Also when I'm in a word processor, turn the wheel to the right input 'c' character ' on the screen.
  There is no problem when I try to increase the volume, it does its job.

  Do you think it is related to hardware or can it be a problem of driver or something. Is there a solution?

  Thank you

  Hello!

  In your case, I would setup a pilot of his most recent. Search on the Toshiba site and check:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had this problem on another laptop Toshiba also and after reinstalling with the recovery disk the problem has been resolved. I also tried updating the drivers and so far, but without success.

  Good bye

• Satellite Pro L - Assistant 'connect to computer' does not

  Hello

  I have a new laptop 'Satellite Pro L Series' and'm having problems connecting to my workplace using the Internet and a VPN connection I've implemented in Windows.

  I was advised I need to connect my new computer on our LAN Server via the function "http://Server/connectcomputer" However, I can't do this work, as whenever I try, I get a message saying that I have a connection or an open window. The problem is, that there is no (other than my LAN) connection open, and no other windows are open. I disabled my Bluetooth and Wireless connections in Device Manager and remove my VPN. After that I restarted the computer laptop, but to no avail.

  I get the error message is in a "Small Business Server Network Configuration Wizard" window and says "the Network Setup Wizard cannot complete because you have an open connection (for example, a network connection or Windows Explorer window) with the Small Business Server computer." Close all connections and windows and re-run the Network Setup Wizard,"the only option then is to select the OK button.

  I rang my Toshiba and IT consultant, but they are at a loss, as I am. Can someone point me in the direction I should go?

  Thank you.

  >... connection at my place of work using a VPN and Internet
  Please don t get me wrong, but it should be clarified with your company and your network administrator. I use VPN connectivity too and it has been configured and tested by the network administrator.

  In society, we test network and before I've had my laptop for use at home, it has been tested and confirmed that he has no problem with the VPN connection.
  Maybe I'm wrong, but I put t think that Toshiba can help you with this. If you have a problem with the operation of the equipment Ok but I don t think they can help you with some internal stuff from the company.

  You have a few general problems with network functionality on your laptop?

• Re: Satellite Pro C850-15 t - device pointer does not work

  Hi all

  A few weeks before it has the feature of pointer (touchpad) on my TOSHIBA laptop suddenly stopped working for me. Ever since the error, I have connect a mouse to the laptop via a USB port, which can and has become rather a nuisance. Unfortunately, I have not the slightest idea when technology is wrong, but is there a way that the error can be corrected?

  Laptop model: SATELLITE PRO C850-15 t

  Thank you very much!

  -rcotterill

  What kind of error is displayed exactly?
  I do not know what operating system you use, but have you tried to reinstall the driver for the touchpad?

• Satellite Pro A300D - reinstalled XP - now its does not work

  Recently, I had a virus on my laptop Toshiba Satellite Pro A300D-14O, which meant that I had to take it to get reinstalled Windows.
  This tech guy who I gave it to a do.

  However, now, the sound does not seem to work properly.
  The volume on the laptop wheel itself does nothing.
  I tried to open Control Panel to check the sounds and audio devices, but I could not change anything in the boxes.

  I tried to download a driver from toshiba Web site was updated, but I thought that it could not find the device driver support.

  Can anyone help?

  Hello

  You must install the Win XP SP3!
  This package must be installed BEFORE installing the audio driver.

  Install SP3
  Then remove the audio driver (already installed) system
  Go to Device Manager and remove the sound chip of the list of devices
  Restart the device
  Now reinstall the sound card driver.

  Should work as it worked in my case as well