Satellite Pro U200: WLan Hotkey Fn + F8 does not

Similar Questions

• New on Satellite Pro 6100 WLAN card installed, but can not be activated

  Hi, just replaced the internal Wireless LAN card on my laptop Satellite Pro 6100. Map of yesterday and today have the same problem: I can't turn them on. They are installed properly and supposed to run in what concerns the XP drivers, but does not detect wireless network andy saying it is "disabled".

  I tried upgrading to the latest version of BIOS
  I reinstalled the latest drivers
  Toshiba network device switch sees only the Intel Pro/100 VE wired, network card, but not the card the Intel Pro/Wireless 2200BG.
  Direct activation of the Wireles does not produce a said connection disable, enable, trying to connect, but it fails, as if he did not see the network.

  Past and present, wireless card fail to see any network.

  Martin

  Hello Martin

  This model of laptop is quite old and at that time 2200 card was not on the market. I can imagine that there is a compatibility issue.

  I think for older models of laptops, the best solution is the use of a faster but external solution in the form of PCMCIA or USB WLAN card. With the help of these cards you will not have compatibility issues.
  What do you think of this?

• Satellite Pro S500-139 - FN + F9 key does not have to turn off the touchpad

  Hello

  I use a Satellite Pro S500-139 and am having problems with my F9 key. When I tap my palm touches the mouse and send the cursor somewhere else on the page. I reinstalled the ALPS pointing device and now have access to the Advanced setting that I was not able to get.

  Although I can set the sensitivity etc. I would really be able to use the shortcut to disable the mouse momentarily while typing. My keyboard shows that, if I press fn and F9 the i should be able to disable the mouse but the function does not work. F9 all other functions seem to work.

  Do you know if there is a solution to this?

  I am running windows 7 pro 32-bit service pack 1.

  What you can try is to reinstall extra package from Toshiba.

• Satellite Pro A300 - 1 H 2 - Windows does not recognize the HARD drive

  Hello

  I'm a newbie, which has probably asked bin before so if You ' l excuse me, I have a satellite pro A300 - 1 h 2.

  I got the volume of unmountable boot blue screen, then tried to adapt to a new samsung drive. I put in my windows disc it will load all the drivers, then says that there is no hard drive?
  In the bios, it recognizes it?

  Thanks if anyone can help

  Hello

  The problem is that your laptop supports the SATA HDD controller but the system OS does not contain the SATA drivers
  You can assign in the compatible SATA mode BIOS.
  This allows you to install the operating system without installation of the SATA drivers.

  Welcome them

• Satellite Pro P100-465 CD/DVD drive does not.

  My Satellite Pro is new and I was very happy with it until I started one day find my CD/DVD drive not recognized.
  Initially that the drawer does not open yet, it does now but only after a few presses the eject button. When I put a disk in it spins and the drawer light flashes briefly, but then nothing?
  The CD/DVD drive is not displayed in Device Manager is?

  Can anyone help please?

  Hello

  I'm not an expert so take what I say with a large pinch of salt and check again! I have a similar problem with my A100 except the works of CD tray very well but the machine will not play some DVD and won't play any CD several people have suggested that download ITunes affects your registry files and shortly after that the machine does not recognize the CD/DVD driver.

  The error message that said something like: "i/o device error".

  Have you tried to download a new driver? I have that have not yet done and came here to seek to verify this info myself.

  Anyone else heard about Itunes affecting your laptop in anyway?

• Satellite Pro U400 - sound of the wheel does not work anymore

  The wheel of sound control in my Satellite Pro U400 works not properly since last month.

  Now, I have to use the volume bar in Vista to adjust properly. When I try to lower the volume by turning the wheel, as I did before, he constantly increases the volume after reducing to a few percent. If I flip it is very very slow, sometimes it decreases the volume a little, but other times it increases. Also when I'm in a word processor, turn the wheel to the right input 'c' character ' on the screen.
  There is no problem when I try to increase the volume, it does its job.

  Do you think it is related to hardware or can it be a problem of driver or something. Is there a solution?

  Thank you

  Hello!

  In your case, I would setup a pilot of his most recent. Search on the Toshiba site and check:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had this problem on another laptop Toshiba also and after reinstalling with the recovery disk the problem has been resolved. I also tried updating the drivers and so far, but without success.

  Good bye

• Satellite Pro A300D - reinstalled XP - now its does not work

  Recently, I had a virus on my laptop Toshiba Satellite Pro A300D-14O, which meant that I had to take it to get reinstalled Windows.
  This tech guy who I gave it to a do.

  However, now, the sound does not seem to work properly.
  The volume on the laptop wheel itself does nothing.
  I tried to open Control Panel to check the sounds and audio devices, but I could not change anything in the boxes.

  I tried to download a driver from toshiba Web site was updated, but I thought that it could not find the device driver support.

  Can anyone help?

  Hello

  You must install the Win XP SP3!
  This package must be installed BEFORE installing the audio driver.

  Install SP3
  Then remove the audio driver (already installed) system
  Go to Device Manager and remove the sound chip of the list of devices
  Restart the device
  Now reinstall the sound card driver.

  Should work as it worked in my case as well

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• Satellite Pro L - Assistant 'connect to computer' does not

  Hello

  I have a new laptop 'Satellite Pro L Series' and'm having problems connecting to my workplace using the Internet and a VPN connection I've implemented in Windows.

  I was advised I need to connect my new computer on our LAN Server via the function "http://Server/connectcomputer" However, I can't do this work, as whenever I try, I get a message saying that I have a connection or an open window. The problem is, that there is no (other than my LAN) connection open, and no other windows are open. I disabled my Bluetooth and Wireless connections in Device Manager and remove my VPN. After that I restarted the computer laptop, but to no avail.

  I get the error message is in a "Small Business Server Network Configuration Wizard" window and says "the Network Setup Wizard cannot complete because you have an open connection (for example, a network connection or Windows Explorer window) with the Small Business Server computer." Close all connections and windows and re-run the Network Setup Wizard,"the only option then is to select the OK button.

  I rang my Toshiba and IT consultant, but they are at a loss, as I am. Can someone point me in the direction I should go?

  Thank you.

  >... connection at my place of work using a VPN and Internet
  Please don t get me wrong, but it should be clarified with your company and your network administrator. I use VPN connectivity too and it has been configured and tested by the network administrator.

  In society, we test network and before I've had my laptop for use at home, it has been tested and confirmed that he has no problem with the VPN connection.
  Maybe I'm wrong, but I put t think that Toshiba can help you with this. If you have a problem with the operation of the equipment Ok but I don t think they can help you with some internal stuff from the company.

  You have a few general problems with network functionality on your laptop?

• Re: Satellite Pro C850-15 t - device pointer does not work

  Hi all

  A few weeks before it has the feature of pointer (touchpad) on my TOSHIBA laptop suddenly stopped working for me. Ever since the error, I have connect a mouse to the laptop via a USB port, which can and has become rather a nuisance. Unfortunately, I have not the slightest idea when technology is wrong, but is there a way that the error can be corrected?

  Laptop model: SATELLITE PRO C850-15 t

  Thank you very much!

  -rcotterill

  What kind of error is displayed exactly?
  I do not know what operating system you use, but have you tried to reinstall the driver for the touchpad?