Re: Svideo cover will not come off.

I can't remove my s-video connector cover. Toshiba satellite P300.

The manual says nothing and the internet has no dealing with this topic. I used a PIN, screwdriver, knife, all the plastic without success of chiseling.

Please help me.



Please take a look in this thread:

Here you will find the news that P300 supports the different graphics chips.

The notebooks of Satellite P300 with ATI Mobility Radeon HD 3470 (ATI M82XT) and HD 3650 (ATI M86) supports the s-video port!

Satellite P300 laptop computers that were equipped with the ATI Mobility Radeon HD 4650 (ATI M96) and the graphics chip HD 4570 (ATI M92XT) * DON T * support the s-video output port.

See you soon

Tags: Toshiba

Similar Questions

  • Help! cover of magic mouse does not come off?

    The cover of my Magic Mouse does not come off when the trigger is pressed in and down.

    See the answer to your second post.

  • K010 ENVY: my laptop will not turn off


    When I shutdown/hibernate/standby/resume my laptop, it will die completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If start/stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you


    You are welcome

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    Kind regards

    DP - K

  • My laptop will not turn off...

    My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?


    ·         This happens even when the power chord is connected?

    ·         What is the brand and model of the laptop?

    Method 1:

    I suggest you to check the power settings on your laptop in safe mode.


    Method 2:

    I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.


    Method 3:

    I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

    Check out these links for help:

    I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

    Kind regards

  • My Dell is power saving mode and will not come out

    My Dell is power saving mode and will not come out? Any suggestions? I can't get anything else than a screen that says it is in power save mode and press a key or move the mouse. No one who does nothing. Don't disconnect.

    Hi Ma32206,

    Monitors Dell will automatically mode energy saving after a predetermined time amount when the computer is idle. The Dell monitor will go completely black, rather than display a screen saver. This allows your monitor to essentially turn off until it takes again.

    A. Press any key on the keyboard or move the mouse. Either will automatically turn off the power saving mode. Alternatively, you can press the power button on your Dell computer tower or laptop.

    B. press one button a second time if the monitor goes power saving in standby mode. Standby mode allows the screen saver appears.

    Bindu R - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My IPad will not come


    If you are sure that the appliance is loaded, then press and hold the home and sleep/wake buttons until you see the Apple logo and then release. It could take up to 30 seconds of operation.

  • IE8 will not come to the top. I get diagnose problems when router connection bed Excellent 54 Mbps

    Internet Explorer will not come to the top.  My router says I 54mpbs Exellent, but I can't go on the internet.  Diagnose the problem button appears.  When I run it, it says that my router is not working.  I have wifi and my friend has the router and its connection is good.  I also have a propellant that works great too.

    Can you get far enough in IE to access the Tools Menu?  If so try clicking Tools | Internet Options | Advanced and clicking the reset button.

    -B- |
    Author: Guide to counsel for Microsoft Outlook

  • I updated adobe and now windows vista will not come to the top!

    I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all.  I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.

    Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X.  Then try to restart normally.

  • Color Laserjet CP5525 will not come on loan

    Printer will not loan and the error log has 49.2F. E3. From what I could find, this is a firmware error. But how I've updated the firmware if the printer will not come on loan?

    Ended up be the firmware. I had to replace the format because that I couldn't get a ready status to update the firmware. Printer works fine. Thank you

  • Security Windows will not come to the top

    lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to

    lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to

    It seems that your system has been infected:

    Preform Malwarebyte s scanning: recommended

    then the use of scan of preform

    a-squared Emergency USB Stick files

    After that, make sure that your system is free of viruses:

    If you can not install anti virus Software, then try to scan online

    and spyware: recommended

  • my printer will not turn off

    Office Jet 6500, wireless, printer will not turn off.

    Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  • HP Photosmart C310a will not power off no response on the screen is

    I have the HP Photosmart C310a months which will not power off or answer unless I have remove the power cable of the whole or to the back of the printer.  Using the Wi - Fi connection, so there is no usb to printer cables.

    This widget could not be displayed.
  • Interface 1130ag WLAN AP will not come to the top?

    Hi all

    For the first time, I installed a 1130ag and I can't bring up the interface without wire/radio?

    I have connected it via http at the moment and have tried to activate the radio via the GUI, but it does not come to the top? (This is normally upward in this way with the year 1200)

    Can anyone suggest anything?

    Thank you very much



    Have you defined a SSID? If you have not the radio will not come to the top.

  • Windows Media Player will not come

    Windows Media Player will not come

    Windows Media Player will not come

    In the Find box type copy paste the following command and press the Enter key.

    "%programfiles%\Windows media player\wmplayer.exe".

    If the above doesn't help, try a system restore - select any restore point when it did not have this problem.

  • Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

    Dell 1230c do not - print jobs go to the queue printing but will not come to buffer

    Hey Joe,

    Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.

    Also refer to:

    Cancel printing

    Maybe you have that impression break.

    View, pause, or cancel printing

    You can also see the troubleshooting steps in Dell for Dell printers.

    Please post back with the State of the question.

Maybe you are looking for

  • my MacBook Air has been hacked?

    Suddenly a small 'i' (not sure) instead of in front of URL lock symbol - means I was hacked?

  • Stream HP 11: Windows 10 11 HP flow broken screen.

    I have a hp 11 with 10, probably of 64-bit windows and flows when I hold it, tap, use keys, regardless of the power button that turns on the light, not the screen. I think that the keys are fine, but the screen is black and white. the battery is immo

  • table model

    Hi all I tried manipulate a table but failed. At the present time, I have an array Ref: 1 2 3 4 5 6 7 8 9 10 and a measurement range: 4.2, 5.2, 8.2, 9.2. The measured table will be compared with the ref and table if the table falls in the Ref, the va

  • omini HP 10 does not start

    I brought the new tab omini. After the update and insert memory card tab showed ocons inadmissible start button. Now after trying several times it don't be startedany more.

  • error code 802000001

    I can't upgrade to windows 10 because of this error.  Help, please