Re: update driver Marvell Yukon ethernet on an Equium A300D

Similar Questions

• Re: Dvd drive no longer works on my Equium A300D - 16 c

  Hi, I need help!

  My Equium A300D - 16 c ceased to recognize any kind of disc, I ve tried to double click on the drive but they hunted gey and the message "Please insert a disk into the drive" appears.

  After reading the posts previous back to a little not to seem too much like a dumb blonde and have checked so far the values of registry - which are not defined, uninstalled the drive via the device of system - nothing works. He was only about 2 months and cannot really be without it.

  Any help would be much appreciated

  Try to remove the drive from Device Manager, restart the computer and test it again.
  Have you tested with original DVD and music CD?

• Problem Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller 32-bit driver

  Question: some time in large files (about 500 MB or more) copy through network doesn´t work well, sometimes when downloading large files.

  Hello, I have contact to report a network adapter driver that already comes with Windows 8, issue in general the NIC works fine, but when I do a simple copy, paste to a file through my network, I noticed that sometimes the file is not copied correctly, completely, it copies the entire without any error file but when I try to check or to open the file It gives me an error of invalid file, I know that everything else is fine because I can do same copies via other systems of exploitation without any errors on the files.

  Windows: Windows 8 32-bit Enterprise

  Nework Driver: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller

  Driver provider: Microsoft
  Driver date: 23/02/2012
  Driver version: 12.0.9.4
  Digital signer: Microsoft Windows

  Hardware ID:

  PCI\VEN_11AB & DEV_4351 & SUBSYS_81E6104D & REV_15
  PCI\VEN_11AB & DEV_4351 & SUBSYS_81E6104D
  PCI\VEN_11AB & DEV_4351 & CC_020000
  PCI\VEN_11AB & DEV_4351 & CC_0200

  Thank you for your attention.

  Solved!
  I managed a way to force the network adapter maker (Marvell) installation (Windows 7 and Server 2008 R2 32 - BIT driver) and apparently it s works very well. ;-)
  http://www.Marvell.com/support/downloads/driverDownload.do?driverId=206&action=1
  However, I believe that it is in fact a kind of a problem with the drivers that came with windows 8.
  All medium tank much Palcouk. :-)

• Installation of Marvel Yukon 88E8040T Ethernet on Satellite U405 using Linux

  Sorry for my English. I am writing from Brazil, and the only reason I'm not posting in Portuguese is because I want to let this information available for a larger number of users.

  I had a few problems although the Marvel Yukon Ethernet PCI on my Debian installation. I bought this laptop because it seems feet all my needs, with a good size RAM, processor and HD (the only problem is the computer keyboard, which are starting to make noises of ugly typing after a while).

  This post is dedicated to helping other users who want to use almost any flavor of Linux to their specifications U405 series.

  In the first place, in order to have a work of U405-S2854 laptop with good resolution of 1280 x 800, I had to abandon my old friend Debian Etch (stable - 2.6.18 kernel) and installation of Debian Lenny (testing - 2.6.24 kernel) because the package 'xserver-xorg' in Debian Etch problems to recognize the Intel VGA controller. I spent hours looking for a good solution to [www.intellinuxgraphics.org | www.intellinuxgraphics.] org Web site] without success.

  Well well... a little conversation and a LOT more action:

  If you have installed a 2.6.18 kernel or the oldest one, the X server will probably be able to recognise your VGA controller and configure it as a VESA adapter, using resolution 1024 x 768, if you are satisfied with this (poor) resolution just go on the site [http://www.marvell.com/drivers | http://www.marvell.com/drivers] download, install your new Ethernet controller and live happily ever after.

  But if you use a 2.6.24 kernel from, then the X server can really identify your "+ VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +" you can face some problems to install your Ethernet card. The good news is that I found someone who has solved the problem!

  All you need to do is open a terminal and copy - paste the following commands.

  . $ sudo knew.
  (enter your password)
  . # rmmod sky2
  . # cd/lib/modules / 'uname - r' / kernel/drivers/net
  . # cp Pei sky2.ko {, .orig}
  . # perl - pe s/\0\0\x6c\x43/\0\0\x55\x43/g ' sky2.ko.orig > sky2.ko
  . # echo sky2 > / etc/modules
  . # modprobe sky2

  Here's the URL that has made my life easier [http://ubuntuforums.org/showthread.php?p=5285654#post5285654 | http://ubuntuforums.org/showthread.php?p=5285654#post5285654]

  I hope this tip is helpful to you as it was for me!

  Kind regards.

  Wow, your teaching is very good and very clear. I appreciate it because I tried to install Ubuntu on my Sat A200 and this machine has also a Marvell chip.

  Thanks for the great info. :)))

  Welcome them

• Hello world!!! I have a problem on my Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller.

  Hello world!!! I have a problem on my Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller. He refuses to detect the RJ-45 cable, I plugged, the problem starts today.

  I have HP 6735 s with Win 7 holiday.

  I need your help.

  Thank you!!!

  Have you uninstalled the device in the age DManager and then reinstalled the driver yet?

• Slow internet speed because of the Marvell Yukon LAN driver

  Hi all!

  I'm a newbie here so don't know if I'm supposed to ask this question here but anyway, hope, my problem is solved somehow.

  I'm on a Toshiba Satellite A200 laptop computer, I received last week and everything works well except my internet speed, its too slow. I'm on a 10 Mbps plan but my speed is no where near that. I get speeds close to 200 kb/s at 300 KB/s max. After some googleing I got to know that the Marvell Yukon LAN driver is the problem here.

  According to some Internet sites, we are supposed to roll back the driver to a previous version, I did it, but speed still does not pass. I have tried almost all the things I can do, but nowhere so far. I called my ISP, they say that everything is rosy on the other hand, ran the scan of Norton Antivruis on this computer, the firewall disabled, and the list is long but nothing.

  It would be great if someone could help me out here.

  Thanks in advance...

  Hello

  checked your connection with another computer, if the problem persists try with another machine?

  Would be really interesting... If not I suggest you to reclaim your machine to 'default '. Maybe it's solved something.
  Another idea would be to remove the service from the "Qos" (quality of service) of your network connection, which hardly slows down the connection for software reasons.

  Please give some feedback and please tell me what system you´re using (Vista, XP)

  THX

  Good bye

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• HP Pavilion Elite HPE - 580t: could not find driver for integrated Ethernet card for desktop HPE 580t

  This desktop computer has been through a number of operating systems and should now have 10 32-bit Windows (for other software support needs).  All right, except that it lacks drivers for connection to Ethernet (built-in) on board.

  I tried the approach of Windows Update, the "update driver" and search HP, Intel, QLogic and other places of Ethernet NIC and Chipset drivers... nothing fits or works.  The hard drive has long been wiped, so there is no recovery partition, nor do I still support discs. :-(

  Is the reported by Device Manager hardware ID: PCI\VEN_14E4 & DEV_164A & SUBSYS_3070103C & REV_02.  164 a same device does not appear on the pci database. :-(

  Yet once again, I need to Win10 - 32-bit (no 64 - bit).  Thanks in advance for any help that can be given.

  Hello:

  There are no W10 driver for this chip ethernet I can find.

  In fact, everything that I could find were drivers for Windows Server 2003 and 2008.

  HP doesn't even have driver Broadcom ethernet on your PC support page, and I couldn't find the site of Broadcom or the other.

  I explored the Broadcom file and there is no support drivers for the hardware ID you have posted in the file.

  So, the only suggestion I can offer would be to try the driver I compressed upwards and attached below.

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the driver will install.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• HP Pavilion a1118x/PX757AA-ABA: I have upgraded to Win 7 64 but lost the driver for the Ethernet connection and unable to connect to the internet

  I can't connect to the Internet, because none of the network drivers are showing. I'll use this for Microsoft Flight Simulator so what card Ethernet buy to install or usb wireless driver do I need to buy to install. The current Ethernet is built-in to the motherboard. The number on the Ethernet Jack real housing is p53-153-11z9, and it's a salmon motherboard.

  Hello:

  I compressed upwards and tied the ethernet driver that shows support for the hardware ID you have validated, below.

  You will need to manually install the driver as follows...

  Download and uncompress the file that I attached to his record.  Do nothing with the files in the folder.

  Go to Device Manager and click on the ethernet controller requiring driver.

  Click on the driver tab, click on set to update driver.

  Select her browse my computer for driver software option and navigate to the folder you unzipped.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Then restart the PC and see if you have network connectivity.

• Recommended update driver wireless router

  After we connected a new router, the Assistant HP invited to "update driver broadcom 802.11n wireless LAN".  I clicked download and to during the installation process has received the message, like him best as I can remember, "wireless would be disconnected... '. "Does this mean that temporarily?  .. .or what?  My router works well and I don't want to rock the boat.  What this warning?

  We have desktop HP, P7-1210. with Windows 7 SP1.  Our router is Linksys E1200 NP, V.2.

  Can someone give me insurance it's ok for the driver installation (update).

  Here are the specifications of your desktop HP Pavilion p7-1210. Here are the drivers of HP Pavilion Desktop PC p7-1210 & download page if you need to download a driver of origin.

  Yes, the messsage means a temporary cut of the wireless adapter. After the new driver is installed and Windows is restarted (if necessary), you should get your return wireless connection.

  Please click the White Star of KUDOS to show your appreciation

• Impossible to update driver nvidia on Satellite P25-S507

  I followed the instructions:
  1 uninstalled the original nvidia driver
  2. install the updated driver downloaded from www nvidia page.
  3. it has been WITHOUT RESULT. The new driver is not installed, so I had to reinstall the older driver
  4. as a result, I can't use OpenGL 1.5 and my generated interpretations are of poor quality.

  So: Why can't update the driver nvidia?

  Hi, any idea on a Machine we, sorry

  Good bye

• Pavilion s5120f: updates driver Windows 7 for Pavilion s5120f

  I need to find a updated driver of LAN for the mentioned above, desktop PC so that I can upgrade to Windows 7 64 bit of Vista 64-bit. I understand that this driver is not provided alone, but as part of an overall package of driver update. Might not seem just to find the right page.

  Charlie

  Hi, Charlie:

  Download and install this driver and restart.

  http://www.nvidia.com/download/driverResults.aspx/14875/en-us

• Satellite R630 - Message about the update driver WLAN

  I get the message driver LAN Wireless update. Have tried several times but still get the same result, messgae I need to update my driver wireless lan.

  Appreciate any help

  Hey Buddy,

  What program tells you that you need to update the driver WLAN?

  In General if everything works properly, there is no reason for an update driver.
  Never touch a running system! ;)

• Satellite Pro L300: x 3100 and updated updated driver chipset Intel 965 graphics

  Has anyone installed the Intel 7.15.10.1666 driver, dated 02/26/2009 for the Mobile 965 chipset? Here is their web page to download:

  http://www.Intel.com/support/graphics/intelgm965/

  Toshiba Satellite Pro L300 doesn't work for some reason unknown to me, with the automatic update driver Intel (download containing the executable file). Therefore, I followed the instructions for manual installation (the download with the zip file).

  My laptop works fine with this new driver, and there is a clear improvement in the transitions between images when you use the option to Windows presentation (slideshow).

  This new driver installs also 3 Intel graphics programs:
  For the management of the display function keys
  Access to the system tray
  Wizard TV

  I used Windows Defender to remove these 3 programs that load automatically at startup of the system to maintain a fast startup time and not loading unnecessary programs in memory. There is no me no problem.

  Why Toshiba has added that this to the driver download page?

  Hello

  Thanks for this second info...

  > Why Toshiba has added that this to the driver download page?
  Who knows maybe it has not been verified, approved and tested by Toshiba?

  As far as I know every phone manufacturers test and approve drivers before they will be released in the pages of pilot
  Perhaps, it has not been approved...

  However, it s good new that this driver works correctly.
  I'll check it too on my laptop.

  See you soon