Problem Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller 32-bit driver

Similar Questions

• Hello world!!! I have a problem on my Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller.

  Hello world!!! I have a problem on my Marvell Yukon 88E8042 PCI-E Fast Ethernet Controller. He refuses to detect the RJ-45 cable, I plugged, the problem starts today.

  I have HP 6735 s with Win 7 holiday.

  I need your help.

  Thank you!!!

  Have you uninstalled the device in the age DManager and then reinstalled the driver yet?

• Marvell yukon 88e8040 pci - e fast ethernet controller does not

  Hi I have a dell inspiron 1750 that I love to bits and recently put a new drive hard and files recovered, but the above problem keeps arising and does not allow me to connect by ethernet or wireless. Please help guys

  If you have installed a new hard drive and reinstall vista, you need to reinstall your drivers. Many drivers may be missing. Go to Device Manager and see what drivers you need:

  Access the Dell Support and enter your Service tag (drivers)
  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Marvell Driver Downloads
  http://www.Dell.com/support/home/us/en/19?c=us&l=en&s=DHS

  Choose your platform and enter the partnumber.

• Windows 8: problem with NIC (marvell yukon 88e8042 pci - e fast ethernet)

  Product name: HP6730s

  OS: Windows8

  Error: Unidentified network

  When I connect to the internet via an adsl modem, occurs an error and can not network identified, when I disable and enable the wired ethernet card once again, it works well

  Hello

  My problem is solved, I just set up my modem in PPPoE adsl.

  now I have Windows 8 poster

  but unfortunately when I want to connect internet via connection (bridge), I faced with an error

  Best regards

  Saeed Mo.Aghdam

• After increasing my speed with my ISP, I get the message by default Outlook Express Mail POP3 / PPP DID not, does not [00000008] ULi PCI Fast Ethernet Controller

  Network adapters [00000008] ULi PCI Fast Ethernet Controller failure

  I had a slow Internet connection.  Recently, I changed to 1 Mbps. After this change, I get the following messages:

  1. default Outlook Express Mail

  POP3 / PPP

  FAILED

  2 network cards

  [00000008] ULi PCI Fast Ethernet Controller has failed

  Kindly help

  S C DIOP

  After setting the network card to make IE work, then check OE.  If the OE still has problems, check under Tools | Options | Connections and tools | Accounts | Mail | Properties | Connection to be sure, the settings are correct.  You may also need to remove your e-mail account, close OE and then add it back again.

  Steve

• Realtek Fast Ethernet Controller RTL8139 works do not under Windows 7.

  I have a problem getting my Realtek Fast Ethernet RTL8139 controller working under Windows 7. During my first installation of windows, in which the controller was visible device manager, I think to remember, but after the first reboot, it disappeared.
  I have two controllers active ethernet in my system, the first one mentioned above and the second: Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [on board].
  Certainly, the controller who is not found is working because LEDS are light when I connect the card to a cable. The other computer that is connected to my PC even shows that a 100 Mbit connection has been created (with problems though). However, it is not possible to communicate.
  I already tried to install the latest drivers from Realtek for Win7 page (dated on the 22.09.2009) but it did not help.

  System Specs:

  Processor: Pentium Dual-Core CPU E5300 @ 2.60 GHz
  (Vivid RAM) memory: 4.00 GB
  Graphics: NVIDIA GeForce 9500 GT

  System

  Manufacturer: Gigabyte Technology Co., Ltd..
  Model: G31M-ES2L
  SystemType: 64 Bit - OS
  Number of cores: 2

  Network card:

  Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [work]!
  Realtek RTL8139 Fast Ethernet Controller (NDIS 5.1) [DOES not work!]
   
  OS: Windows 7 Professional (Version 6.1.7600)

  Hello

  Uninstall the audio player of the program and features.

  Then install the Realtek driver by downloading it from the link below:
  http://America.Giga-Byte.com/filelist/Driver/motherboard_driver_audio_realtek_azalia.exe

  Cheers and enjoy... :))

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• Satellite M55 - PCI modem and Ethernet controller continue missing

  Hi all

  I got this Satellite M55 quite a few years and until now it works really not too bad for me apart from a few minor errors here and there...
  Just recently, I sometimes have some hard to connect to wireless internet.
  It could always be connected only after hitting plugged in at least 2 or 3 times, and the connection is not persistent in time.
  When I look on the computer management, it seems the Ethernet controller and PCI Modem are missing. I tried to search and re - install drivers associated with wireless local area network and so forth, but stops the error.
  This advice would be really appreciated!
  Thank you in advance.

  Configuration:
  Satellite M55 S325
  Window XP Pro
  Intel PROSet / Wireless

  Hello!

  Where is - it has you fact check for drivers? Normally, you will get all the drivers on the Toshiba site:

  http://www.CSD.Toshiba.com-online download-online portable => Satellite-online M55-S325

  I searched this site and I founded all the drivers.

  Good bye

• 3Com 3C920B-EMB Fast Ethernet Controller

  I recently installed an upgrade to Windows 7 on my HP d325 ut and has difficulties to find a driver for the ethernet controller. Can you help me find the driver for the controller that I can download for free on a cd of w/r that I can then use to install the driver on my HP?

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for the latest Windows 7 drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• ETHERNET controller LAN missing driver.

  Before a week ago, I bought a laptop (HP pavilion dv - 4 3006TX). I installed all the drivers from the HP website. When I go into the Device Manager, it shows two drivers (device ethernet controller and unknown) are not installed. But I tried all the drivers listed in the site. Please help me... and it should be mentioned that I don't have a good knowledge of hardware pc or laptops... so please help...

  Hello

  There is no need to uninstall the driver from Chipset and most likely you do not have to restart it is because the downloaded version was already installed.

  Try download and install alternative Realtek driver on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50676.exe

  I would like to know if it installs Ok or if you still get the same error.

  Kind regards

  DP - K

• problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

  Hello guys,.

  I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

  The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

  I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

  I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

  Any suggestions?

  The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

  C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

  You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

• Re: update driver Marvell Yukon ethernet on an Equium A300D

  A month ago, I think it was I got an alert on the Toshiba Tempro tool for updating a driver for Marvell Yukon ethernet on my laptop driver. I downloaded the zip file by following the instructions on the site of Marvell (an updated driver was published on 18-08-08) and tried to install it, but that's when I hit a problem. When I try to install it tells me that a previous version is already installed and uninstall the previous version first.

  The problem is when I go to Device Manager and try and find the driver, the only entry is for a 'Marvell Yukon 88E8040T PCI-E Fast Ethernet controller', but the driver I was prompted to install was one of Marvell Miniport driver.

  At the time I just ignored him, thinking that the update was not relevant for me, but since then, I had a number of BSOD - the last afternoon - and in all cases when Windows has finished it's error report, it returns with advice that I need to update of the Marvell Yukon Semiconductor driver... and directing me to the download as I was originally directed worms by the Tempro alert. Of course again, it says I have uninstall the previous version before installing it, but as I can't find an earlier version of the Miniport driver to uninstall there is nothing I can do about it, even once I ignore it. Everything seems to work fine (apart from my current ignored problems of internet with my wireless connection and the fact that I can't seem to set up a connection wired (perhaps because this driver issue?), but sooner or later I get a BSOD even once, he accuses the Marvell Yukon driver so I'm back to square one.) I had the time BSOD now 4 or 5 in the last month.

  All advice appreciated.

  Hello

  Have you tried to restore the operating system to an earlier time using System Restore tool?
  Try it and let us know if everything works well again. If you leave and be happy without updates.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• HP mini 110 ethernet controller problem

  Hello I have a HP mini 110, the problem is that my ethernet driver is not install! I'm on windows XP service pack 3, 32-bit. I TRIED INSTALLING THE DRIVERS LISTED ON YOUR SITE BUT IT SAYS AFTER INSTALLATION "CONTROLLER REALTEK M\THE IS NOT FOUND."

  my device remote ID is "PCI/VEN_1969 & DEV_1062 & SUBSYS_308F103C & RV_C0\4 & 23C6FC68 & 0 & 00E1"

  Here is the driver for your network card.

  The device is an Atheros AR8132 PCI - E Fast Ethernet Controller

• Update the driver Via Rhine II Fast Ethernet Adapter

  Help, please!

  I can update my Via Rhine II Fast Ethernet Adapter driver with the 3.84.0.1 64 bit version of Windows XP same dough I'm running a 32-bit Windows XP?

  I could not find a version to 32 bit Win XP.

  My current driver version is 3.32.0.417, and a few programs scan driver free, that I found on the Internet it were classified as 'old '. My Internet connection isn't going very well.

  My system information:

  Widows XP, home edition, service pack 3, version 2002, intel celeron 420 CPU @ 1.60 Ghz, 160 Ghz, 384 MB RAM

  Thank you very much and God bless you!

  Tiberiu, Romania

  # No, if it's only for XP - 64.

  A driver is 'old' does not mean that you need to replace.  The general rule for Windows drivers is, "if it ain't broke, don't fix it."  You should only update a driver if the device does not work correctly and you have reason to believe that the driver is at fault, or (b) the new pilot adds features that you want or need.

  OTOH, if you go to the real Web SITE (instead of random file download sites), you can find a driver for XP 64 and XP (i.e., XP-32) who seems to be newer than yours - version 3.87.  This driver is for the following models, which can be yours (you have failed to identify the specific model you have).

  Integrated VT8251, VT8231, VT8233, VT8235 & VT8237 integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)