Re: Vista restarts using the Toshiba USB DVB - T receiver.

Similar Questions

• Toshiba USB DVB - T TV Tuner Driver XP

  I have a problem with my laptop Qosmio Toshiba USB DVB - T TV Tuner and... I have install the Savvy TV as stated but when I insert the usb in the system tuner always respond with "unknown device" and won't let me assign the correct drivers.

  I tried to download the latest version of SavvyTV and follow the instructions in http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8164&tstart=15 (restart every time and install in a good way) but the problem is always the same: usb not recognized and cannot be manually set the correct driver for the device.
  I tried also to delete the Windows registry with a name like trendy clientele, o usbdtv.inf without result after the reinstallation of the program.
  Could you please help me or suggest something?

  Thank you very much.

  Hello

  Please visit this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Here, you choose:
  The USB Options TV Tuner DVB - T tuner Windows XP options

  You will find two versions of different tuner driver. The latest version of 1.0.14.1218 is from 01/02/06. Try to install it. Maybe it helps.

• Problem with Toshiba USB DVB - T TV tuner

  Hello

  My Toshiba USB DVB - T TV tuner worked perfectly for the last year when I was in Italy. Now, I'm in France and when I run the Auto search, I find not all channels. I uninstalled Savvy TV and downloaded the new version of the site Web of Toshiba and installed Savvy TV again. Then just after opening it, I see the names of all the Italian channels, I used to watch (although now I can't watch them, only I can see the name of the channels).

  But after you set the region in France and running Auto scan, I get all the channels. The list is empty. Can someone help me please this subject?

  Thank you
  Annie

  Hello Annie

  Are you sure signal, DVB - T is available. I have the same tuner and watch me works well but 100km, my friend does not work because in this area, there is certainly no DVB - T signal.

  Try to please pick up some info on this.

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• I need drivers for Toshiba USB DVB - T Tuner

  * Toshiba USB DVB - T Tuner *.

  * P/N PX12311E-1TVD *.

  Please if you can help me to answer me bye can e-mail address

  * thx *.

  I wonder why you didn t receive all the drivers and software package together this TV tuner device?  :|

  However, Toshiba drivers can be downloaded from this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  There you have to choose from;
  Options of-> office-> TV tuner accessories

  There, you can choose between the hybrid USB TV tuner and DVB - T tuner.

  Good bye

• How to use the "Toshiba controls" with other players?

  Heey

  I have a Satellite with Toshiba controls. How can I change so I can use the buttons for other media players and not only Windows Media Player?

  A dude sorry for the bad news, but I fear that it is not possible to use the Toshiba controls with another application as with WMP (CD) and WinDVD (DVD)
  I think that the utility was already programmed and designed to use only these two applications.

• How can I connect name BT IDS of devices in a log file by using the Toshiba BT stack

  Hello

  without Microsoft stack, I can't use a lot of freeware programs (BluetoothView.exe, BluetoothCL.exe, BTScanner for Windows), to 'catch up' bluetooth devices in a log file.

  How can I connect names bt ID/description of the devices in a logfile using the Toshiba Bluetooth stack?

  Thank you

  I don't know if there's a tool for that. However, it should be possible with some Bluetooth SDK controls.

• Read only the SPI using the box USB-8451

  I am using the NI USB-8451 box to read the SPI of a Honeywell digital pressure transducer data.  The difficulty comes from that part of Honeywell uses only the SPI in half-duplex mode, meaning that it only transmits data, but does not require anything beyond the appropriate chip select signal and SCLK to start transmitting its 32-bit sensor data.  To facilitate experimentation with the sensor, I bought a USB-8451 SPI Interface thinking I could easily configure the 8451 to read data from the sensor.

  However, if I understand the situation, there is a problem.  The 8451 considers full duplex data, i.e. a data word must first be sent to the SPI device in question before the unit will start to transmit back data of its own.  And since the MOSI data writing periods, since this particular device starts transmitting immediately once a clock is applied, synchronizing the unused address data will cause the unit will return its data before the 8451 begins listening for data in return.  The call used by the 8451 to write read action can be divided into the individual reading and actions of writing of any kind that I could discover.

  Can someone tell me if I missed something in this operation or if there is some quick tips, that I could use to be able to use the 8451 therefor?  Thank you!

  Doug G.

  Exactly correct. It's nice when things are easier than expected. Hope it works as easy as it sounds.

• Using the NI USB-6009 case to generate a 12VDC output and output current of 300mA

  Hello

  I use the OR-USB-6009 my power supply for a 12VDC with drive current of 300 solenoid my. Initially, I used a non reverse Op-amp circuit and Inverter circuit operational amplifier to get the + 12V and - 12V output but I could not get the current I required. Should I use a transistor?

  Please find attached photos. Any input would be appreciated.

  Thank you

  Adam

  Well, really depend on your piercing circuit.  But I used most systems use the transistor to set the voltage of the device to 0V.  So when your DIO is high, the output is actually 0V (low).  So using a converter chip, your release of the DIO will be sort of the output circuit.  If you get the right IC, then the inverter will give you also a few extra current to drive your transistor.

• What advantage is there in using the NI USB-232/4 on a standard USB Serial Hub?

  What advantage is there to use the NI USB-232/4 on a shift to USE of concentrator series?

  

  I have an application that requires LabVIEW control of 19 instruments that communicate via RS - 232.

  I have read the Datasheet for the NI USB-232/4, and I see no benefit of spending $528 for this unit (five times) on a standard USB to Serial hub for half the price.

  Can someone tell me if there is an advantage for the NI USB-232/4 or if they have had experince with one?

  Thanks in advance.

  Agile wrote:

  Thank you, NYC for the quick response.

  Why you prefer that your desktop with taken PCI card in charge of ports series? The space? COM stable #s?

  COM stable #s, harder to disconnect randomly, don't have to worry about the bus power, do not have to worry about Windows randomly powering buses as a feature, reliability, often less expensive energy saving...

• Cannot use the Micro-USB port on the coming Pro 11?

  Hello

  Can I use the micro-USB port to a mouse or other device (with Dell micro-USB to USB dongle for tablets)?

  Bought one as advertised and does not work...

  Thank you

  Hey guys, it seems that there is still much confusion over the functions of the port mictousb on the place of the 11 sessions pro.

  Anyone know if it is possible to use it for anything other than recharging? An OTG cable connected I have here doen't work on my 7130, but on ebay, some sellers here in Germany offer small hubs with OTG funcion specially for this model:

  http://www.eBay.de/ITM/kwmobile-3In1-micro-USB-hub-adapter-fur-Dell-venue-11-Pro-Schwarz-Verteiler-Kit-/361194175623

  Does anyone know for sure who is the truth?

  EDIT: also, as the microusb port has the logo of bolt on I guess this is the port used for the powershare function (if this feature is enabled in the BIOS). Does this mean I have to buy a microusb to microusb cable to recharge my mobile hollow 11 meeting places powershare function?

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• Use the adapter USB Bluetooth Toshiba with cell phones LG

  Hello

  I have the * Toshiba Bluetooth v2.0 + EDR USB Adapter * in my PC Windows XP Pro SP3.
  I want to use it with my * LG KC780 * mobile phone. I have installed all drivers and programs.

  PC and phone are in "coupling", but the settings Bluetooth from Toshiba utility cannot connect to the phone.

  I can't use "file transfer" or "webcam bluetooth" function of my phone. Nothing.

  How can I do?
  Thank you very much

  You can try changing the security mode of the PC:
  (Right click on the tray icon to System Bluetooth-> Options-> Security-> Custom Level-> Mode: level of link applied security)

  What happens if you click on a file in Explorer and then click on 'Bluetooth' in the menu contextual right click?

• 3 peripheral USB connected to the Macbook 4.1 computer tells me to restart using the power button / stop?

  I went to record a live concert, and I need to use a single interface to record the members of the group with microphones near directly to a computer and another interface running for my model of Macbook 4.1 end of 2007, to get signals from the map of the House.

  When I plug my converter USB 3.0 AD / DA in my Macbook 4,1 - the computer sends immediately a window indicating to me to "reboot" the computer using the power button / stop. Ideas or comments about why this happens?

  I read on this forum that USB ports should work with retroactive effect, or accept USB 3.0 devices, but just use a speed 2.0?

  Thank you.

  It could be that it is a requirement of your converter AD / DA she needs to be present at a properly accessible to the OS X when startup sequence it is plugged into a USB2 port.

  Its also interesting to note that, well that peripheral USB3 can be plugged into the USB2 ports... it could be that your device may not work properly unless it is used with a port USB3... for reasons of bandwidth or even certain types of power supply.

  But to be sure...

  Which converter AD / DA are you using?

• Need vista driver fot PX1211E - 1TVD USB DVB - T Tuner

  Hi all, I need driver for the USB DVB - T Tuner, model PX1211E-1TVD I bought time ago.

  Fully functionaly on XP, but I need to driver Vista, 32 and 64 bits.

  Please, could someone link me the ultimate driver and software for vista for this USB? I checked all the download section, without success! :(

  Thank you.

  Hello

  I don't know if this will help you, but on the Toshiba download page I found software for tuner TV USB for Vista 32 bit - check HERE.

  I didn't test it with my USB TV tuner (I have the same). What I did is to install it with WXP CD delivery. Vista later offered to me to find the Vista driver automatically.
  I just followed link offered and all goes well. You can try the same thing.