Re: Win7 save problem

Similar Questions

• Satellite M100 - 165 PSMA1E - XP Pro updated to Win7 Ultimate problem

  When installing Win7 Ultimate (Eng) with current XP Pro en shows system error (something like could not find a certain file) and the installation will stop.

  At the beginning of the installation, I delete all partitions and create new ones.

  At the same time Win7 creates, it's own partition with the size of 100 MB.

  Using the same disk I installed Win7 on Compaq Presario CQ60 no problem. Also instead of XP Pro.

  What could be a problem?
  I have to download and use a special software from Toshiba?

  Currently I just get XP Pro using from an external drive USB Acronis Universal Restore.

  I'd really appreciate for your help.

  Stand by?
  First I would like to know which version are you trying to install?
  I checked the Toshiba download page and saw that this old notebook is supported for Win7 32 bit only so I hope you are using the 32-bit version.

  Are you using the original installation disc for Microsoft?
  Usually clean Win7 installation should work without problems, especially if you make clean OS install. I ve tested on several old notebooks and didn't note any problem.

  Set the BIOS to the default settings and try again.

• NB205-N210 Power Saver problem

  Hello!

  Im having an error during the installation of the Power Saver software.
  I have Win XP SP3 (Hungarian) and when I try to install the software, it gives me this message:
  "1628: scenario based Setup fails.

  I read after that, and they say "Idriver.exe" commits the error, I tried to turn it off, but I can't
  Can someone help me know how to install this essential part of the software for my netbook, with her dough last only for about 3-4 hours (instead of 7-9)?
  Thank you very much in foreword!

  Invites you to the Microsoft Knowledge base:

  Method 10
  If you get the error message "Error 1628: impossible to install complete based on the script.
  And followed the instructions above and it didn t determine the problem and you just create fees
  installation package by using the InstallShield tool, please disable "Cache installation on the local computer.
  option during the installation package creates the process.
  Link http://support.microsoft.com/kb/555175

  So maybe it has something to do with temporary files.
  Go to c:\documents and settings\ [your name] Settings\Temp
  and delete all the files in there (close all other programs first, or do in Mode without failure).

  Also try disabling your Antivirus software. They can sometimes block facilities.

• Tecra A4 (PT40E): Power Saver problem

  When I close the lid, it prepares for sleep.
  Used to work properly. Now it closes all applications and crashes.
  The powersave icon does not appear in the sys tray.

  I have updated Bios 1.7 but which gave intermittent starting problems.
  Now back to bios 1.2
  All original drivers and utilities resettled.

  Thank you!

  After installing SP3, anything is possible. As much as I know Toshiba does not updates, tools and utilities for SP3. So in your case, you have two options: use all the stuff from Toshiba with SP2, because tools and utilities are tested with SP2, or remove the system energy saving.

  I'm sure that you can live without energy saver. Am I right about that?

• Loops and save problems

  Hey,.

  I'm having a problem backing up my data. I have a program that simulates a tap. Essentially a certain tension will trigger the data to collect. To present to all members of this forum, I just faked this effect. If the button is on then it pseudo randomly triggered the first inside the loop.

  Here begins the problem. When the first inside the loop is triggered, the charts show the resulting data and a box pop up asking if you want to save this data. Well this time I click Yes it will not save. Then the next time, the first inside the loop is triggered the record dialog box is displayed to save the current data. It's really weird. If you want to see what I'm talking about consolidated please run the program and click Yes, you want to save a couple of times and I think that you begin to understand my problem.

  Essentially, I want to be able to see the results of the data and decide whether I want to save. If I choose Yes, then I want to quote the path of the file.

  I looked at this for hours and can't come to a conclusion, why this is happening. Maybe a problem of flow or the loop?

  Please note that the outer loop must always be to keep the ongoing program.

  Thanks for any help on this

  Thank you very much! has worked like a charm. Don't know why I didn't sooner.

• Save problem

  I use Sage accounts and save it on an external hard drive. I can't open files while my PC trying to open them in Word. I gave the portable player to my accountant who could open the files Sage o his office, so the problem seems to be with my PC. Any ideas?

  Cliff

  What version of Sage accounts?

  Y at - it a working copy of the wise on the computer that contains the backup copy?  based on my experiece of line 50 accountant so I would use the restore feature in the wise to open a backup copy. You use the function go point wise to backup, everywhere where it is placed on the computer. However, to make a backup copy of the existing files being used by Sage before trying to restore.

• Win7 activation problem

  I activated Win7 Home premium on my machine, but after a few days my phone crashed.

  Now, I want to activate same OS on another machine & conclude an error why?
  Please turn it back on for my new machine.

  Try the activation of the phone;

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 screen saver problems

  My screen saver does not work correctly. After I got the settings, the saver will start and run for a few moments and close. A while later it will restart and stop again. It could be hours before it starts again. I have reset all settings several times screensaver, and again, I have problems with it working properly.

  Maybe things can stop a screen saver

  Just to name a few.

  Update of security suite / a keyboard or a mouse too sensitive wireless...

• Win7 restart problem

  During a recent update that requires a restart, the computer stopped to a white screen with power on but will not re-start. Problem persists I or a program needs to restart the computer. Using Win7

  Hello

  To help you better, please answer these questions.

  1. the updates Windows do you have installed?

  2. are you able to boot to the desktop?

  3. have you made further changes on the computer before the show?

  You can follow the provided methods to solve the problem.

  Method 1: Why is my screen black when I start Windows 7?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Windows 7: back up the registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to back up and restore the registry in Windows

  Method 2: How to resolve auto restart problem when Windows 7 is a mistake (simple difficulty Article - written by MVP)

  http://support.Microsoft.com/kb/2621246

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Service pack for difficulty Win7 install problems? ___

  Was NOT ALLOWED to read a post regarding win7 & service pack for win7!

  Now, I read that a service pack win7 will be released sometime in July.

  Will be service pack "fix" Setup encountered problems where one of the practical suggestions for some was to remove the CD when the clean install restarts.

  If it is possible to "slip stream" win7 service pack, then I'll try again to install my win7 student (x 64) on my winxp (32).  The installation worked (removed the CD) but win7 worked for 1 week, & then _ broke loose. was never able to install win7 yet as he entered in a constant loop even with a "clean" install every time.

  A beta version, is not ready for public consumption pre-release Service Pack 1 in July. Service Pack 1 will be a minor update which will contain essentially all the updates since July 22, 2009.

  http://windowsteamblog.com/blogs/Windows7/archive/2010/03/18/talking-about-Service-Pack-1-for-Windows-7-and-Windows-Server-2008-R2.aspx

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Win7 security problem

  Hi I have a laptop with win7 home premium, I tried to get an excess of all my files and directories and I think that by mistake one have limited at all, now I can't even to the local drive every time I have try tell me what excess refused, I tried and followed the instruction that was given at the beginning of this help forum , but he won't let note change, some can please help me with the problem I have some personal files on the local disk and I can't seem to them. Thanks in advance

  Similarly, the same command worked before...

  Here's how you can know what is happening:

  Set Log="%UserProfile%\Desktop\Log.txt".
  echo Path = % Log
  You should now see this line of text:
  Path="c:\Users\matty\Desktop\Log.txt".

  If you still have problems with spelling then here is another approach:
  CD "% UserProfile%\Desktop".
  cacls c:\    1 > log.txt 2 > & 1
  cacls c:\Users 1 > Log.txt 2 > & 1
  NET user "user %%nom" 1 > Log.txt 2 > & 1
  Log.txt

• Character animation save problem

  I am doing a project to host character and save it to the desktop. When I reopen it the project, that it's all confused and my work cannot be reproduced. I'm running on a MAc Book Pro Power. Any ideas what the problem might be?

  [Moved from After Effects to Character Animator - Mod]

  I think choose media gather before closing will help keep all links from local media and works on any system you open on (I had this problem when file sharing with someone else and the fixed gathering).

• Auto save problem

  First 5.5

  I got my self entity to 50 versions of backup at 5 min intervals and I find when the auto record number reached 50 more early for those who are not replaced. The program always comes up with 'save project' every 5 minutes, but I can't find where it is they save (or even at all). I just noticed this problem (after a premature crash). A couple of months a go, I did a reinstall of Win 7 and 5.5 production premimum, I don't have this problem when I had only 5.5 installed first. Any thoughts...

  RMK

  Look at the Date of modification.  This will give you the most common auto save.

• Word 2007 to save problem

  When I go to save a Word Document in Word 2007, navigate to where I want to save the document via the check-in box and the only thing that appear in this place are the folders, even though I know that there are already other Word documents at this location. I do not use the generic location of My Documents XP, but when I did it with Word 2003 Word documents, but also records would be present. I really need to see these documents pre-existingWord I save everything new, because these are numbered files and I need to know what number to save this last Word doc as... I hope that this explanation makes sense, thank you for your time of Pedro.

  As you know, Microsoft has changed the format of the Office between Office 2003 and Office 2007 files.  These formats are not compatible with each other - but new versions of Office programs can read, edit and save files in the old version if you wish.  Older versions of Office programs need the installation of free "Office Compatibility Pack" to treat the files saved in the new format.

  Most recent format files have an x at the end of the file name extension, as in document.docx or spreadsheet.xlsx

  See http://office.microsoft.com/en-us/help/introduction-to-new-file-name-extensions-HA010006935.aspx

  If you look carefully at the dialog box "save under", you will notice that located under the box 'File name' is a box of "Save as type".  By default, the new versions of Word and Excel defined the 'Save as type' to the new format, that is, "(*.docx) Word document" or "Excel workbook (*.xlsx).  The files listed in the dialog box are files that are the same as the "Save as type".

  Thus, if you want to see your old Word documents in the dialog box, change the "Save as type" to "Word 97-2003 document (* .doc).

  But beware: Word 2007 (or Excel 2007) saves the file in the format that you specify, so be sure that you specify a format you want.

• Screen saver problems

  Any suggestions on why the screen saver does not work?  I've set up and he will be seen, but it does not start.

  This article could be applied.

  The screen saver does not work when you use a pointing device Microsoft Wireless on a Windows Vista-based computer:
  http://support.Microsoft.com/kb/911895
  Ramesh Srinivasan, Microsoft MVP