Read e-mail id configured in the product in the application

Similar Questions

• I have worked for an hour on a treadmill and the ring of read activity 7 min. In the application of the workout, I chose the domestic market. Do I have to have my phone in my pocket for it from the activity of the hour on the ring

  I have worked for an hour on a treadmill and the ring of read activity 7 min. In the application of the workout, I chose the domestic market. Do I have to have my phone in my pocket for it from the activity of the hour on the ring?

  If you wore the watch - (as your signature "Look" inside) then no - the phone should not be in your Pocket

  Otherwise Yes - it's the only way the phone detects your movements

• Unable to open the pdf. files.__Message: the configuration of the application is incorrect__reinstall the application.__Question: How do I reinstall?

  can not solve my problem. I have adobereader 9.3

  It's a fairly generic message, but basically it means that you must remove and reinstall Adobe Reader. I suggest remove you, but replace it with this drive and you will probably have a lot less headaches. It is a more compact program as well.

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Print file .rep directly on the printer, configure the application server

  Hello

  I spent several hours on this forum and unfortunately not found a solution yet so hoping someone has an idea that can help me solve this problem.

  Using forms/States of oracle 11g with a linux application server, we develop on windows machines. Printing reports using compiled .rep files.

  We have a network printer sharing (HP) that is configured on the application server, and we can print on the correct printer directly on the application server.

  Problem is when I try to print a report when executing the forms of oracle on my machine of development directly to the printer.

  I tried:

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_destype, printer);

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_desname, 'APPSERVER_PRINTER_NAME');

  When I put the report_desformat in 'pdf' format I can see the reports to enter the print queue, but they do not reach a 'State' order ' print file empty. "

  When I remove report_desformat, he sends in eps and as I understand it, it prints, but with bad formatting (I work remotely and run by what their colleagues say.)

  CUPS 1.4.2 reference printer queue tab.
  

  The report generates in the browser if I change the destype to produce and use web_show_document to display it as we usually do.
  

  
  

  I understand there are solutions using a java bean or involving the installation of the software on the client computer, but my employer is unwilling to go to that direction. We have only a handful of reports that require the ability to print directly to the printer.

  
  

  That someone has an idea of what the problem might be or help provide additional steps, I can take to solve problems? I have no idea how to do to configure printers, our IT Department managed this and they say, it's good so I don't know if there is a problem with what I'm doing or there was something installation related rate with this network printer.

  
  

  Thanks in advanced for any assistance!

  I have given up trying to use a report_desformat of pdf and paste it with the default value of the eps, after review, it seems pretty close match that generates pdf format and despite the fact that the queue on the application server throws a misprint even with the eps format it actually always draws for the good enough for now. Would be nice to know what happened here, but the problem has been resolved.

• Configuration of the kit of healthcare on Hyperion Planning 11.1.2.2

  Hello
  
  I am very new to Hyperion Planning. My main goal is to prepare a demo for the integration of the planning of Hyperion with OBIEE (via Essbase cubes). So, I thought to install and configure the samplecode healthcare kit provided by Oracle. I managed the installation and configuration of the EMP 11.1.2.2 and everything works fine. MY OS is Windows 2008 Server R2 64 bit. But I was struck during the configuration of the application of health care on page 7 of the document provided when he asks:
  * 1. Connect to Oracle Hyperion Enterprise Performance Management workspace as an administrator.* of financial information
  * 2. Select tools, then the database connection Manager.*
  * 3. Create new connections to data source for all types of HCSamp.* plan
  a. connections Essbase pilot
  i. login name: HCSamp.NetRev pointing on request: HCSamp and database: NetRev HCSamp.OpExp pointing to request: HCSamp and database: residential HCSamp.FinStmt pointing on request: HCSamp and database: FinStmt HCSamp.Wrkforce pointing to request: HCSamp and database: Wrkforce
  b. connections pilot planning
  
  I'm not able to see tools-> database connection manager. Unable to decide where to create the pilot Essbase and planning pilot connections. Any help is appreciated.
  
  Thank you and best regards,
  Karamba.

  1002398 wrote:
  I'm not able to see the tools--> the database connection manager. Unable to decide where to create the pilot Essbase and planning pilot connections. Any help is appreciated.

  Have you installed RAF and financial information, if so you should be able to connect to the workspace, go to the discovery and then selects the tools-> database connection manager.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Application Builder: the Application closes after the Launcher

  I'm launching my application executable that was built with the Application Builder. I use framework actor and have a Launcher.vi which is defined as the start VI and launched the actor parent. When I run the executable, I can see the front Launcher.vi opens and closes quickly, but the main façade never opens. Where should I start to debug my executable? Is there something obvious that I do not forget to do? I compared my configuration of the application to the actor framework example (that does not produce an executable work) and can not find something that is different.

  OK, I thought about it. I went back and watched closer launcher for the example of master actor and I noticed the block launch actor VI didn't have "Open front actor Core" value true which seemed strange because the front opens correctly for this application. I searched in VI properties for the parent of project example actor Core.vi and saw that the appearance of the window has a custom configuration. The options to see the façade when called and then close while initially closed have been verified in the sample project but unchecked for my project. I also watched the run settings and saw that the example is configured to reentrant run clone Shared while my project is configured to run not reentrant.

  Changing the appearance of window correctly launching my main façade. I played with the run settings to see what those and noticed that when my VI is configured to not reentrant run, child actors do not seem to get started. In addition, the stop on my front button will close the front panel, but the application is still running. Change the mode to Shared clone lance child actors correctly and completely closes the application when you press the stop button. I also tried clone reentrancy pre-allocated to see what would happen. errors of launcher just immediately say the call by reference VI is not executable.

  I guess it makes sense. Framework of the actor expects that the State is not maintained when a player is destroyed, so shared clone ensures that each instance of a child actor has its own pool of memory to be erased when the player is stopped. http://zone.NI.com/reference/en-XX/help/371361J-01/lvconcepts/reentrancy/

• Problem server standard weblogic that does not detect the application of ADF data side

  Hi all

  I use the jdev11.1.1.7.0 version.

  I have deployed an adf on oracle weblogic server application. When to test a page server-side it dispalyed but with blank fields. When I try to insert the data, it shows an error like "lines cannot be created in the entity xxxx.eo (name of the entity with path mentioned on Jdeveloper). This same code is deployed in the weblogic server local and works very well.

  For DB connection: I created a JNDI connection and used on the configuration of the application module. DB connections are tested. they work very well on the server side.

  Could someone help on why the error comes from the side server.

  Thanks in advance,

  Suresh.

  Hi all

  Thanks are for all of your support.

  Problem is solved. It is may not be bounce oracle weblogic server.  After the rebound of the server, the database data is displayed in pages.

  Thank you

  Suresh.

• Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  Is it possible with the serial number of an Xserve to read the configuration and the year of production?

  This will show you the model and year: https://checkcoverage.apple.com/

  If a specific configuration (like the 1 TB disk instead of 500 GB for ex) will not be determined. You can only learn by starting the Xserve (or open and look into it.)

• How to read the e-mail configured on the device

  Can we get the e-mail address of the account that is configured on the device in bb10

  https://developer.BlackBerry.com/native/reference/Cascades/bb__platform__identity__blackberryid.html

• I need to leave emails on the original email server and still be able to read e-mail using Thunderbird

  When I read e-mails and delete them Thunderbird deletes the e-mail messages from the original server. Another user also reads emails, so I need to leave them on the origin server so she could be able to read also.

  You use the POP or IMAP protocol?
  Sounds like the last, and which is normal with IMAP.

• My font size changed in Firefox when you try to read email using yahoo email. I now have to use explore to read my mail. can you tell me how to go back to the police the readable size. Thank you

  I use firefox for years to read my mail. recently, the size of the text became small and difficult to read. I would get the large text size once again, so I don't have to use the other browser. I have an att yahoo email account and subscribe at & t uverse for the internet service.

  • In the menu bar of Firefox: Tools-> Options-> content, here to set your favorite font sizes.
  • From the upper-left corner of my.yahoo.com, look for a "Thèmes" item under the 'My' tab In this option, you can select the size of Yahoo-specific fonts.

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• My windows mail does not display the "sent items" when I send an email or reply to an email or click "request read receipt. How can I fix it?

  Windows Mail problems:

  1 not showing my sent emails or emails responded to my "sent items".

  2. when creating a new email and clicking on tools and then click on "Request read receipt" If does not appear in my "sent items".

  3. Please help me with this problem.  I need to keep track of what I send to businesses.  What happened to my Windows Mail?

  Windows Mail problems:

  1 not showing my sent emails or emails responded to my "sent items".

  2. when creating a new email and clicking on tools and then click on "Request read receipt" If does not appear in my "sent items".

  3. Please help me with this problem.  I need to keep track of what I send to businesses.  What happened to my Windows Mail?

  Click the sent items folder > view > current view > show all messages

  t-4-2

• Windows live mail does not work next to configuration settings are incorrect, how do I fix see the application event log

  tried to open windows live mail message came on the screen indicating next to configuration are incorrect how this can be corrected

  Hello

  The question you have posted is related to Windows Live Hotmail and would be better suited in the Windows Live Solution Center.

  Alternatively, you can try to uninstall and then reinstall the Windows Live Application.

  How to remove and reinstall Windows Live Essentials

  http://support.Microsoft.com/kb/938275

  Please visit the link below to find a community that will support what ask you

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hope this information helps.