Read file

Similar Questions

• Not able to read files audio wma

  I myself had this new cool device and everything is working fine beside it is not able to read files audio wma.
  It works without any problem on my Samsung android phone, but on my Slate7 it says format not supported in specifications indicates that it is supported.
  I installed the same player that I use on my Samsung android phone, any suggestions I should do to fix this?

  To my knowledge 4.1 Android doesn't have the necessary codec to play default WMA files. Please see the compatible audio formats listed by Android developers:

  http://developer.Android.com/Guide/Appendix/media-formats.html

  However, for me MXPlayer/VLC works to play WMA files. You can try this one, and there is no harm to try. Two of them are available on PlayStore. You can uninstall them if you don't like them or if they do not meet your needs.

• Bootcamp - Windows 10 should not see or read files from the disk HARD Apple intern.

  I have just successfully Windows 10 next OS X on my 15 "Macbook Pro mid-2014.

  Windows 10 should not see or read files from the disk HARD Apple intern.

  Should which driver I uninstall?

  On OSX, if the following Terminal command produces any output, then you cannot read partition OSX on the side Windows? FileVault2 will also disable access to the OSX partition.

  Cs diskutil list

• How to avoid the pop-up dialog box? «Read File.vi worksheet»

  I use LV2010 and VBAI2011.

  I use LV to write vi for the UI of my VBAI. VBAI will send the results of the inspection by "Inspection UI update"VI.

  I call an "run a LabVIEW VI" go in the VBAI. This vi contains a subvi "worksheet Read File.vi." the "file path" entry to the subvi is a control of the chain, which will be updated by a value of string obtained in the previous steps.

  What of happen when I run the Inspection, a windows "choose File to Read" will pop up, even if I already updated the "file path" in VBAI. I guess this happens because 'Reading of worksheet File.vi' sub - vi did not wait for the entrance of the "file path", or rather the updating of the "file path" was "too slow."

  How to prevent this?

  
  

• The reference must be closed on a reading-file error or not?

  Dear users,

  When I read a file, a reference is created one should close, when no longer used, should I? Here is a minimal example to my next serious question: should I close the benchmark on reading-file error or not? Is there a created in the case of "the file does not exist"?

   

  See you soon,.

  No, when used in this way, the references created by the file read and write functions should not be closed - thought that he would have no negative effect if you did.

  In addition, you do not want or need the structure case around a reference close the function.

  Mike...

• Problem with reading file xls with text inside

  Hi all

  I have a problem to read the excel (xls) file with the first line containing chains of different length.

  I wonder how can I skip the first line and continue reading of the second line.

  Thank you very much.

  I only have saved VI.

  So here are the names.

  Downstairs: open the file.  Text reading file with lines of selected reading (right click for the menu to find).  Read the text file with lines of reading not selected.  Close the file.  At the top is spreadsheet String to Array.

• How to restore the documents now say "error reading file"?

  I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.

  Help!

  Hello

  1. what documents do you speak?

  2. were you able to view these files before?

  3. don't you make recent changes?

  I suggest you try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  It will be useful.

• Cannot read files Flac

  Hello

  I have Sansa Clip Firmware version 02.01.32A and I am not able to read files flac. I have read most of the posts about this but still cannot load on my 2G clip. They are normal flac files with the extension .flac and play fine on my hard drive.

  Any suggestions?

  I found the solution by searching in the posts more carefully.

  I had the USB setting to auto and I changed it to 'MASTER '.

  Thank you.

• Reading files FLAC on my Clip

  Hello

  I have a 4 G Sansa Clip allows you to read files FLAC. However, when I now try to download files FLAC on the player, I get an error message indicating that the file type is not supported. How can I get my video to play files FLAC?

  Thank you.

  Try to use the MSC mode for transfers instead of PSG.

• Error: cannot read file, Protocol not supported while watching a video

  Original title: can't access a video

  I try to watch a video and I get a message, can't read file, Protocol not supported, this is something new? never seen this happen until today.   I'm not good with computer, so I have no idea what to do now? I hope someone can help me

  Hello

  You can read the following article and check if it helps:

  Error message when you try to use Windows Media Player to stream audio or video from Windows Media Services: «the specified protocol is not supported»

  http://support.Microsoft.com/kb/940029

  Also check out the following link and check if it helps:

  http://social.answers.Microsoft.com/forums/en-us/xppictures/thread/02a93593-F483-4B50-836C-391acfbe8b83

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error reading file Photo Editor

  I have a Kodak EasyShare M853. When I download the videos/photos to my computer, I go to the Start Menu, then pictures. I can see the thumbnails load, but when I click to see the images (majority around 1.1 MB), Microsoft Photo Editor (MPE) opens with a reading of l 'oading' window - and goes directly into a pop up window reading - "!" Error reading file. "I can open the files with Internet Explorer and paint, but it cannot change them as needed as the EMT cannot read the file.
  My version of Microsoft Photo Editor is 3.0.2.3 and Vista Home Premium operating system
  Before I had a Kodak DX7440, and never had any problems!
  A previous comment to Brookeanna did not have a real solution!

  Hi Ben Verhoof,.

  Thank you for writing to Microsoft answers Community Forums.

  Microsoft Photo Editor is supplied with Microsoft Office 97 and the stand-alone versions of Microsoft Word 97 and Microsoft PowerPoint 97. Microsoft Photo Editor is installed when you perform a custom installation, or full from the CD-ROM.

  What is the format of the files you are trying to view?

  The link below talks about Photo Editor. Try to look at the troubleshooting section in the article below

  General information about Microsoft Photo Editor:

  http://support.Microsoft.com/kb/169938

  If you have still questions I recommend checking out the resources of the Office Suite and would be better suited to the community of the Office Suite. This is a support forum for Windows Vista. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• When I save a file (using "Save as" in Firefox) on the desktop the address bar reads: file:///C:/Users/Name/Desktop...

  ORIGINAL TITLE: File evil

  When I save a file (using "Save as" in Firefox) on the Office the address bar reads: file:///C:/Users/Name/Desktop...how can I fix it?

  Hi Goldie,

  1. not the problem only occurs when you save the file in Firefox?
  2. don't you make changes to the computer before the show?

  I suggest you try to save the file using Internet Explorer on the desktop and see if it works.

  If the problem is with the shortcut of Firefox, then I suggest you to post.
  https://support.Mozilla.org/en-us/questions

• Error reading file in Photo Editor

  I have a Kodak EasyShare C813. When I download the videos/photos to my computer, I go to the Start Menu, then pictures. I can see the thumbnails load, but when I click to see the images (majority around 1.1 MB), Microsoft Photo Editor (MPE) opens with a reading of l 'oading' window - and goes directly into a pop up window reading - "!" Error reading file. "I can open the files with Internet Explorer and paint, but it cannot change them as needed as the EMT cannot read the file.
  My version of Microsoft Photo Editor is 3.0.2.3

  Hello BROOKEANNA,

  Thank you for using the Microsoft Windows Vista Forums.

  The pictures you are not able to load, they are in a different format that the other photos you can see?   This subject has always taken place or something recently?   You have changed something with your operating system before this problem?

  Please let us know status!
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error reading file

  When I download pictures from the memory card and try to visualize a small box arrives marked Microsoft Photo Editior error reading file

  Microsoft Photo Editor is an obsolete program that
  has been abandoned in 2003. Might be interesting to try
  Set your image to a more recent application associations...
  Windows Live Photo Gallery for example.

  Windows Vista - how to associate a file Extension
  Type with a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

• Is there a file converter or the codec available to open/read files .vvf

  reading cctv .vvf file

  Is there a file converter or the codec available to open/read files .vvf

  Help, please

  thanx

  Nev

  Have you tried VLC Player?

  VLC Media Player - he can play almost all audio and video files:

  http://www.videolan.org/VLC

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• How can I create an Adobe Reader file that I can put my downloads of my emails?

  How can I create an Adobe Reader file so I can put my recipe from various sites downloads?

  To create a folder for * any * purpose, in 'my computer, go to where you want the folder to be and right click here. Choose new | Folder, and then type the name you want for the folder.