Read speed problem

Similar Questions

• any ideas? ~ macbook pro (13-inch mid 2009) speed problem & sound a1278 ~ el capitan 10.11.5 (15F34)

  any ideas? ~ macbook pro (13-inch mid 2009) speed problem & sound a1278 ~ el capitan 10.11.5 (15F34)

  
  

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-25 16:47:10

  Download EtreCheck from https://etrecheck.com

  Time 02:21

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Verify the signatures of Apple: enabled

  
  

  Problem: Computer is too slow

  Hardware Information: ⓘ

  MacBook Pro (13-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 5

  1 CPU 2.53 GHz Intel Core 2 Duo: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 7

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

  Disc information: ⓘ

  SAMSUNG SSD 840 EVO 250 GB disk0: (250,06 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  a /Volumes (disk0s2) / has: 50,00 (GB 49,84 free)

  b (disk0s3) /: 199,07 go-go (160,81 free)

  Recovery HD (disk0s4) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Configuration files: ⓘ

  / etc/sudoers, 1242 but file size expected 2299

  Protection of the integrity of system status: disabled

  Guardian: ⓘ

  Any where

  Kernel extensions: ⓘ

  / System/Library/Extensions

  [no charge] com.native - instruments.driver.NIUSBDeviceHelper (1.0.8 (R32) - 2016-06-25) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 165 tasks Apple

  [operation] 66 tasks Apple

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 164 tasks Apple

  [operation] 79 tasks Apple

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-06-14) [Support]

  [loading] com.malwarebytes.HelperTool.plist (2016-06-25) [Support]

  User launch officers: ⓘ

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist (2016-06-23) -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  [loading] com.google.keystone.agent.plist (2016-06-23) [Support]

  Items in user login: ⓘ

  gfxCardStatus Application (~ / Downloads/gfxCardStatus.app)

  Hidden Google Chrome application (/ Applications/Google Chrome.app)

  NIHardwareAgent Application hidden (/ Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)

  Other applications: ⓘ

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.Google Chrome

  [ongoing] com.eidac.smcFanControl2.54432

  [ongoing] com.etresoft.EtreCheck.6112

  com.google.Chrome.47072 [loading]

  com.native-[ongoing] instruments.NIHardwareService.54752

  [loading] 411 tasks Apple

  [operation] 176 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-23) [Support]

  QuickTime Plugin: 7.7.3 (2016-06-25)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-23) [Support]

  JavaAppletPlugin: 15.0.1 - 10.11 (2016-06-23) check the version of the SDK

  Default browser: 601 - SDK 10.11 (2016-06-25)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-14) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  28% by mail

  11% WindowServer

  6% kernel_task

  2% hidd

  1% fontd

  Top of page process of memory: ⓘ

  1.65 GB Google Chrome Helper (13)

  563 MB kernel_task

  Mdworker (19) 360 MB

  221 MB Google Chrome

  Com.apple.WebKit.WebContent (2) 131 MB

  Virtual memory information: ⓘ

  3.77 GB of free RAM

  used 4.48 GB RAM (2,40 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  25 June 2016, 16:18:23 self test - passed

  24 June 2016, 18:55:37 ~/Library/Logs/DiagnosticReports/WebProcess_2016-06-24-185537_[redacted].crash

  com.apple.WebProcess - /System/Library/PrivateFrameworks/WebKit2.framework/WebProcess.app/Contents/Mac OS/process Web

  MacBook Pro, average vintage thrash?

  Your hard drive may be faulty, run disk utility > first aid your recovery volume or another hard drive under OS X on it and let us know what he reports.

  https://support.Apple.com/en-us/HT201639

  Edit: you 2009 isn't a recovery, run it from your installation CD original or other dislk with OS X on it.

• Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

  I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

  CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

  However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

  Do a clean install

  Make sure you have the Apple Java

  h ttps://support.Apple.com/kb/DL1572?locale=en_US

  Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

  update the application via photoshop.

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• Every time I try to open a pdf document that is located on a server of our company (so not on my laptop), the drive still shows error. Cannot open the document. Only in EAC I copy the document to my local PC, I can read without problem. Server is mapped

  Every time I try to open a pdf document that is located on a server or in our company (so not on my laptop), reador always shows error. Cannot open the document. Just in case I have copy the document into my local PV, I can read without problem. Server is mapped in my FileExplorer (Win7). So boring and big bug I think.

  Massage of error: "there was an error opening this document. The network path was not found.

  Hi tobiask53385798,

  Could you please try to disable Protected Mode under ' Edit > preferences > (protection) "and see if that helps.

  Let me know.

  Kind regards

  Ana Maria

• TCP speed problem when changing read write

  Hi all

  I have a weird problem with TCP/IP blocks in labview. I'll take a moment to explain my set up.

  I have a laptop running Labview 7.1 and a machine of RT ETS running standard Labview RT software. Both are linked to an Ethernet dedicated, not a crossover, but through a network switch which turned nothing else on it.

  I have 2 screws, a vi server that is running on the machine of RT and a vi client that runs on the laptop. All this doing is to transfer a small amount of data back. The client sends to the server a DBL vi, this number is multiplied by 3, has 1 added to it, and then send again. The client then sends a string to the server, followed by a byte of stop. (see attachment).

  What I find is that this loop at the incredibly slow pace of ~ 200ms. It is a 100 Mbps ethernet connection! I tried many things and cannot work out why and I hope someone can help me. It seems that there is some delay when the direction of data is changed (i.e. a read after a write)

  This is where it gets ridiculous. When I remove the sending station and stop as Boolean of two screws, it works very, very quickly.

  This is part of a project more vast and complex, I have a problem with and I narrowed down it to this issue. I checked the boards and nobody else seems to have this problem, which would suggest that I do something stupid

  Help, please!

  Pete

  Take a look at this thread on the Nagle algorithm, which deals with what I suspect is the same problem that you see.

• SSD Ultra II read &amp; write speed problem

  Hello world

  I'm hoping to get help please about an SSD, I just bought and do not seem to be getting anywhere near the advertised speed it is supposed to be able, I only spent by technical support yet as thought someone here might know the answer.

  I bought the Ultra II capable of up to 550 MB/s write in reading and 500 MB/s, but after doing some 480 GB testing the 3rd party software and the State of SanDisk my speed to read dashboard is about 346 MB/s and writing is about 236 MB / s, is not anywhere near the announced speeds.

  I made sure the drivers are up to date in the dashboard, checked my motherboard and confirmed he has 2 SATA2 and SATA3 2 ports, bought new cables SATA 6.0 GB of data and made sure that they are plugged on SATA3 ports using the manual of the motherboard, but I get still only these slow speeds.

  Any help anyone can offer would be great, thanks.

  What is the MB brand and model? Some MB have several SATA 6 GB ports on different controllers. Intel SATA chipsets tend to perform best. I have a MB with Intel and AS Media SATA 3 chipsets and I see the same performance you see if I connect an SSD SATA 3 ports that use the controller AS Media.

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• WRT1900AC with internet speed problems

  So I've recently updated my 30mbps to 180mbps Comcast internet. We decided to get new hardware to support this faster speed that our 'old' was quite old. The old router is a Linksys E2000, not terribly old, but does support up to 300 Mbps. Our upgrade includes the WRT1900AC and a modem Arris Surfboard SB6183, both purchased about 3 months ago.

  Now here's my number: At the time when we thought that the new internet, router and modem seemed quick and we really didn't actually check our speeds are after you configure the settings. After about a month I started noticing the buffering in the videos and on the websites of loading time slower. I decided to perform a speed test on speedtest.net and found that the speed was down to what she was before us all, upgraded 30mbps... This is certainly not what I pay for...

  A crossed wireless settings to try various channels rather than just auto and got one that seems to work. Channel 11-2, 462 GHz on the 2.4 GHz network and channel 157 - 5.785 GHz on 5 Ghz. prioritization of media network also tried lit after reading that would solve the problem. He did it! I was getting around 150mbps down, so it was a big improvement. Awesome its fixed!

  I ignore the case for a few weeks, but later concluded that the internet was down to 35mbps. This confused me because I did not change settings either. I do more research and find how to configure bandwidth downstream under MP settings. He seemed to be attached to all about 30mbps so I upped it to 200 Mbit / s. save the settings, restart the router just to be sure and do a speed test. Nothing has changed. Always get a slower speed to about 35mbps down and 12 upwards.

  

  I tried everything I found on the internet with no results. To reset the router to factory settings to change the channel under network settings for each network. Still nothing. It fluctuated between 20-35mbps down with the settings I've adjusted and does not exceed 35. I don't know if there is a hidden buffer, I should be searching or if it's something else.

  If I'm missing any info in this I'm going to try my best to fill it.

  Any help is appreciated!

  Thank you

  Matthew

  Your bandwidth downstream MP must be set to 184320. Active WMM.

  To ensure that the issue is not the modem or ISP connect a computer directly to the ISP modem and run the speed test. Keep in mind that on your network the user could also heavily use the Internet causing the performance problem.

• Linksys N900 EA4500 speed problem

  Hi guys,.

  I recently updated my ISP one up to 55 Mbps service (new modem - cisco DPC3008). I did some speed tests and what goes directly from modem pc my reaced 57.27 speed down and 10.72 upward.

  When you browse the EA4500 router I can get 10.50 down and 3.73 upward. I read through a few recent discussions to go to the router configuration and

  -Prioritation media-settings-the downstream bandwidth is fixed at 10945 kbit/s.

  I tried to change to 55000 since I'm now up to 55 Mbps. In addition to the support WMM is defined on IT. I checked to see if the router is in need of an update of the firmware and the unit shows the firmware is uo to date. As soon as I leave the screen and return only the bandwidth is changed to 10945.

  Does anyone have an idea on how to get the router to Max which will result in the modem?

  Thank you. Bruno

  Thanks to FurryNutz. Problem solved

• Connection speed problems - black WUSB54GC usb adapter

  Hello everyone,

  This is my first post here!

  I googled nothing helped, and so I thought I would record with the Linksys forum and see if maybe I can solve this problem that others may have as well.

  I recently installed black WUSB54GC usb wireless adapter on my desktop PC, windows XP (now updated with service packs, etc.)

  The adapter receives the complete signal (very good - excellent, 54 Mbps), but it seems that my download speeds are capped with this adapter. Web pages same way load more slowly. I can place the macbook from my girlfriend directly next to my office, connected to exactly the same wireless network, and its download speed, browser speed and speed test results are always twice as me (any site speed test I use or what file I download).

  When I do a speed test, almost seems as if the speedometer needles few want to continue, but they just 'bounce', as they are hitting some kind of ceiling.

  When downloading files, the macbook on average 500 to 800 Kbps, while the adapter WUSB54GC hangs out at approximately 90 kbps.

  I have read in this forum and have adjusted my router Linksys WRT54G wireless suggested as follows:

  -Set the channel 11-2 wireless, 462 GHz

  -Change the interval of tag to 75

  -Change the Fragmentation threshold to 2304

  -Change the RTS threshold to 2304

  In addition, my connection speed is even slower, regardless if I have the settings TCP/IP (under the Wi - Fi connection properties) set manual (static ip) or automatically.

  Any help would be greatly appreciated, as I would like to be able to get this thing working properly, knowing that my router is pumping a lot more than this adapter is letting me use.

  Thank you!

  Well, I think I solved the problem.

  Seems that in some ports USB on my motherboard (Asus P5B) do not allow to run at full speed wireless USB adapter. I had used in the rear ports on my computer... but the passage for the first ports (that came with the case - Thermaltake Armor) seems to have solved the problem. However, as I believe that all of the USB ports I have is strange Hi-speed USB 2.0 and strange that those outside that came with the case and will connect to the pins on the motherboard works better than those actually built. Huh.

  Wouldn't be something to do with the drivers for the WUSB54GC, or is this a problem with USB port drivers?

  In any case, I'm sorry if this sounds like a useless thread now, but maybe this someone solve other problems too.

  See you soon!

• T500 P8600 (2.40 Ghz) Core speed problems - works only in 1, 6 GHz (6 x multiplier)?

  Hello

  I'm new here and I hope you can help!

  System specs

  Lenovo T500 (2081-CTO)

  CPU: Intel Mobile Core 2 Duo P8600 2.40 GHz

  RAM: 6 GB DDR3 PC3-8500 (2 GB + 4 GB Hynix halogen)

  BIOS Lenovo: 3.13 - 1.06 (March 2010)

  Operating systems: Windows 7, 64 bit

  Battery: Yes

  Power: 90W installed

  Power setting: maximum performance; Max CPU speed: more top [ThinkVantage Power Manager 3.12]

  Setting BIOS: Intel SpeedStep disabled; Everest EU 5.50 confirms: C1E & EIST are both: "supported, disabled.

  All Lenovo drivers are up to date *.

  ---

  Problem: Base speed is blocked at 1.6Ghz (multiplier x 6.0) and only fluctuates several Mhz from time to time. I think it should be fixed at 2.40 Ghz, I have disabled all the settings save CPU speed.

  Basic speed (1.60 Ghz) conforms to:

  -Everest Ultimate Edition 5.50

  -CPU - Z 64 bit 1.54

  -Intel Processor Identification Utility 4.22.20100224

  All of these are the @2 P9800. 40 Ghz is clocked at 1.6 Ghz or 1.59 Ghz.

  I ran the load/stress test, Super-Pi etc... and obsevered the basic speed - it never changes or is greater than 1.6 Ghz.

  Super Pi takes 31 seconds, where landmarks on a normal P8600 2.40 Ghz see the this should be done in 20 years.

  I have read several threads in these forums and tried all the things suggested:

  Example of Lenovo Forum Thread 1

  Example of Lenovo Forum Thread 2

  I even tried affecting performance Max CPU speed to "Adaptive", and yet, it does not go beyond 1.6 Ghz.

  Can anyone suggest other things I can do to make sure that it is not a problem? I thought I bought a 2.40 GHz, not a 1.6 Ghz.

  I have several more months remaining warranty, contact Lenovo to return my CPU? or is it a fault in Lenovo BIOS?

  Intel speed step must be enabled.  If you read what it says in the bios, if it is off then they processor will not let the State of the minimum speed.  This is the case on my T510.

  Give it a try.

• Satellite A300-15J: Vista x 64 Card reader driver problem

  Hello

  I have a problem with the driver for my internal card on my laptop (Toshiba A300-15J) reader and I use Vista x 64 system.
  I am really lost, just tried to add, for almost every driver possibble to many other copanies, I'm looking for help here.

  If someone I also have this problem or have solved this problem, please give me a link or advice how to get this device works on Vista x 64.

  Kind regards

  Tom.

  Hello

  Seems that the 64 bit Vista drivers are not available for this new series of Satellite A300-15J PSAJ4E.

  But as far as I know the laptop supports a digital media card reader that has been integrated into another series of small notebook common Multiple.
  So why you n t try some card reader controller driver Vista 64 bit published BLAH IE Satellite A210 or another series.

  I recommend you test some drivers

  Good luck

• Low-speed satellite Pro U400-142 - Wireless-N speed problems-

  Hi guys...

  I ve just bought a laptop Toshiba Satellite Pro U400-142...
  I have a belkin N1 Wireless cable router...
  I was really happy that I could get the speed up to 300 Mbps... with this laptop and the router...

  I am very very disappointed that he is only showing 65Mbps... My laptop supports Wireless N such that it has a wifi Intel 5100 card inside...
  Why show a low speed?

  I m in the same room as the wireless router if the signal is excellent...
  I've tweaked on with the settings in the network adapter settings...
  I got it to 130Mbps... for about 10 seconds before it dropped back down to 65Mbps...

  Can someone tell me what is the problem?
  I need to change some settings on my N1 router or what?
  This was one of the main reasons why I bought this laptop.

  concerning

  You have reason seems the wireless network adapter supports the Draft N
  But are you sure that you are using Draft N?

  Is it enabled in the Device Manager-> properties-> Advanced tab card WLan?

  At 802.11 N selected in your router settings?
  Update you the BIOS and WLan card driver?

• DVD-RAM UJ-820 s: speed problems

  Just wondering if someone has managed to solve the problem with UJ-820 s, i.e. the speed not how it should be for the writing/extraction. I had to use using a USB to get anything above 2 x when the specs say that it should go to 4 x - false advertising?

  I guess the drive need a firmware update, but it doesn't seem to be an easy way to contact Toshiba to get one!

  See you soon

  Dave

  [Edited by: admin]

  Hello

  What you mean exactly with speed not how it should be for writing/ripping? You can burn DVD - R with a X 4 speed?