Set an alarm using application built-in clock that repeats every two weeks

Similar Questions

• I do a layout of paper every two weeks; This time, when I opened my model, set up for the next issue when I typed 'W' to display the grid I have something totally different than previously, a background grid which is more annoying.  Why in the world

  new to InDesign 6 months I do a newspaper page layout every two weeks.  This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ".  The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing.  I don't know what happened, but it seems that Adobe has tinkered once more with the program.  The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column.  NOT useful.

  There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time.  (I know, without replica.)

  I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen.  What is my new Mac, or something to do with the program that I can fix it?

  Thanks, Sacie

  It looks like the grid of the document, which can be disabled in the view menu.

• set a reminder every two weeks

  I have a HP Pavilion a6500f desktop PC running Windows 7 Home Premium.  I would like to know if there is a way to set up a reminder every two weeks for filing forms.  I have a form that must be filed every two weeks and I don't get reminders to do so.

  Help would be greatly appreciated.

  This maybe... http://Lifehacker.com/5833572/the-best-calendar-app-for-Windows

  Either this... http://Windows.Microsoft.com/en-us/Windows7/looking-for-Windows-Calendar

  Either this... http://www.AddictiveTips.com/Windows-tips/install-Windows-Calendar-in-Windows-7/

• Understand how to set up and use a sample FlexRIO clock

  Hello

  Following this discussion on inputs glitching, I learned that I need to use the area of the sampling clock to read nodes to HAVE it in my 5734 OR. So I right click 'FPGA Target'-> "New FPGA Base Clock" and selected "IO Module clock 0". In general, I followed the instructions at http://www.ni.com/pdf/manuals/375653a.pdf

  Issues related to the:

  1. I noticed that, regardless of the value I put in "Compile single frequency", timed loops using this clock works at 120 MHz. Should it?
  
  
  2. I want to gain at 10 MHz, no 120 MHz. is there a way to create a clock derived from the sample clock? (Right click on the clock gives me not the option "New FPGA derived Clock")
  
  
  3. In the example of the FIDL, engine of CQI on 5734 SMU - 7962R.lvproj, 'IO Module 0 clock' is configured to be compiled to "100 MHz" instead of 120 MHz. is there a meaning behind this value? (# 1, I understand that the value is ignored)
  
  
  4. The code example below, I get "error-61046 occurred to read/write control" unless I have excluded the "Reset" of the VI host node. This problem does not occur if I use on-board 40 MHz clock instead of the clock of Module e/s 0, (although I'd get glitched data). Am I wrong configured something?
  
  
  1. In my current, more complex program, I get the same error even with disabled node, if I stop and restart the host VI - but the next attempt would succeed.
  
  
  2. I have attached the sample file project, the screw and bitfile, where they are useful.

  

  

  Hi FKSH,

  You are right that you must Access your e/s on the 5734 NOR in the area of sample clock:

  

  (this information is by using LabVIEW for the CLIP of 5734 OR)

  It is a clock Module e/s 0 or sample clock based on your version of the FlexRIO driver you have installed. Based on your statements, looks that you use LabVIEW 2014, so be sure to have FlexRIO 14.0 or FlexRIO installed 14.1. If you have FlexRIO 14.0 or earlier, the sample clock will be IO Module clock 0. If you have FlexRIO 14.1 or later, it will be the sample clock:

  

  (also of the documentation NOR 5734 CLIP in help)

  The only support for sampling rate is 120 MHz, unless you use an external clock CLK in and it must be between 50 and 120 MHz (see page 9 of the Manual). If you wish to purchase to 10 MHz, the best thing to do would be to sample the e/s to 120 MHz and then decimate the data by a factor of 12 (keep all 12 data points only and throw out the rest).

  Regarding the FIDL, I'm guessing that you're referring to the configuration in the properties of the clock:

  

  This configuration is not actually change the frequency of the clock. The compiler uses this value so that the logic can operate at the specified frequency, but the real clock is provided elsewhere (in this case, the FAM).

  Finally, I saw error-61046 occurs more often because of the configuration of the internal clock. Make sure you use the clock on the right as the only cycle timed loop source as I mentioned above. In general, I do not recommend write directly on a 120 MHz indicator, as there are a lot of other logic that needs to be done in order to update the indicator. The data are sent to a domain different clock under the hood, so you can actually update the data and I suspect that there are some conflicts with the clocks. You also lose data as the host won't be able to read all the data before it gets crushed. Instead, I would use DMA FIFOs if you need all the data you acquire or to send the data to a different loop which will be responsible for the update of the indicator in a slower clock domain.

  In general, I recommend always that the start-up of the examples in the Finder as a good place to check if the equipment works properly and as a reference for the correct configuration. Once you compile the code, you should be able to run it natively to acquire some data. "" "These examples will be under input and output hardware" FlexRIO "Modules e/s ' NI 573 X ' NI 5734.

  Best regards

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.

• Firefox used to work like a dream until about two weeks ago. It does not load propperly. How can I fix it?

  I run on a Macbook Pro. I have all the latest updates that I am aware. Firefox appears then disappears immediately. Then an oops can't load page appears.

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia

• License Manager for applications built in LabVIEW

  What I have is a licensing system to add to applications built in LabVIEW that works more or less like a volume, or as FlexLM license server, where a customer is allowed to so many instances/seats of a program.  Most of what I found looking around my own has been for licenses Add-ons for LabVIEW, which is not what I'm looking for (it's what makes third-party attribution license and activation tool box, for example).  I want it to work like saying the CAD program to work - we have X licenses to run SolidWorks, so when someone starts the program, it fist check with the license server to see if a license is available.  If so, the application opens, and then withdraw the license when the app is left.

  I found Protection PLUS 5 of SoftwareKey SDK.  It looks pretty good.  I like that they have a licensed server product that manages the whole "set up a license server" for me.  I think that some (or a lot) of work, this could be useful.

  The problem I have with the product is that it's a terrible LabVIEW library.  It is not to add to the palette of features anywhere.  Not one of the screws included have a description.  They don't follow things to standard LabVIEW style, like the error code from the lower left and the lower right (actually go in and out of the top middle).  They have an online site that lists what each command and how it works, but it's a pain to work looking back from a webpage to LabVIEW.  The only example they included is a little obtuse.

  So I guess I have two questions.  The first is, has anyone used 5 over Protection, and what did you think of him?  The second is, is there an another add-on which recommend you people?

  Oh, just remembered, but I don't know if it has this feature - http://sine.ni.com/nips/cds/view/p/lang/en/nid/211731

• Measurement error of the County of edge by using the external sample clock

  Hello

  I'm trying to measure the number of edges (rising) on a square wave at 5 kHz with a generator function on a device of the NI PCIe-6363. I configured a channel of County of front edge of counter at the entrance of the PFI8 device. I use an external sample clock that is provided by the output of the meter of a NI USB-6211 housing channel. If I acquire for 10secs then ideally I would expect to see a total of 50000 edges measured on the meter inlet channel. However, my reading is anywhere between 49900 and 50000.

  When I use the internal clock of time base to measure the edges, the measure is accurate and almost always exactly 50000. I understand that when you use the external sample clock, the precision of the measurements is subject to noise level of the clock signal. However, I checked the clock signal is stable and not very noisy. Any reason why there is an error of measurement and how tolerance should I expect when using an external sample clock compared to when you use the internal time base clock?

  Also, what is best clock Frequency (with respect to the frequency of the input signal) when using an external clock?

  Thank you

  Noblet

  Hi all

  Thanks for all your sugggestions. I was using an input signal with a function generator which had a range of 8V. It turns out that the reduction of the amplitude to 5V solves the problem. I was able to get accurate numbers with the 6211 external clock.

  Thank you

  Noblet

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• VI Analyzer in an application using the built

  I have an application which is designed for a continuous integration server.  This application uses the VI Analyzer API (Labview 2009 for the moment) to run a series of tests on a case of the screws.  The problem is that when the program is run like VI all is happy, that the folder is added using the 'Add VIAn Item.vi' and the task runs on the four VI in the folder.  But when the VI is built and comes as an exe file, 'VIAn Add Item.vi' appears to add the folder but no vi is analyzed and if a specific VI is given then error 53 is thrown by "NI_FileType.lvlib:Get leader Type.vi.  Is it just a case of not being able to use the VI Analyzer API in a built application that is running as an exe?  I have attached the front panel of the application built after he was executed and the rear panel of the source code in question; There is more that the rest is just to determine the paths to analyze.

  The VI Analyzer API is not supported in a built EXE.

• Set a value of Application using PL/SQL element

  I have a question of enforcement F101_MAINTENANCE it needs is the value set according to the values in a table. The value would be a piece of HTML code.
  
  Ideally this would be verified every time that a page is loaded and the value is printed on the screen on every page.
  
  Is there a way to do this?
  
  I use 4.0.2 on 11g

  Hi Craig,.

  To set an application using PL/SQL item value:

  // some examples
  :F101_MAINTENANCE := 'some value';  // a varchar
  :F101_MAINTENANCE := 123;           // a number
  :F101_MAINTENANCE := SYSDATE;       // a date
  

  The varchar 'some value' could be HTML and could be HTML with the values of a table concatenated, like this:

  DECLARE
     l_ename VARCHAR2(100);
  BEGIN
     SELECT ename INTO l_ename
     FROM emp
     WHERE empl_id = 123;
  
     :F101_MAINTENANCE := 'Empl name: ' || l_ename || '';
  END;
  

  (Take the space out of the style attribute - it's just there because the forum keeps style stripping attribute when displaying the post values.)

  This could be in a process of page to fire when the page loads. If she has to work for all pages, it could be in an application process set on fire during the loading of each page. If it should work for all but a few pages, you can place the code in an application process on fires during each page load, but then put a condition on it so it is not fire for specific pages.

  Now that the application is defined, it can be used on the pages where you need. If it is used for display only, remember to not escape special characters, or else it will just display the HTML rather than surrender. And if the value of the element of the application only needs to be set in PL/SQL, be sure to set the protection of session state so that he can "Restricted - cannot be resolved in the browser.

  Hope this helps,
  John

  If you find this information useful, please indicate the 'useful' or 'correct' post so that others benefit. *

• DSC set up Alarming.vi - duration of long-running!

  I have a variable application ~ 400 County with DSC Shared Variable engine running.

  Call Alarming.vi set (DSC motor control Palette) to set off alarms takes about 30 to 50 seconds to the process through the list of variables.  In the former SDC you used to be able to I think.  Is there any equivalent for this function when you use EVS or what I have to deal through both variables?

  I tried only the \\hostname\LibraryProcess\ of power VI, but he didn't like that.

  RVallieu,

  Looks like you tried the correct steps. I talked to our R & D team, and it is unfortunately not an option to toggle hidden alarms in bulk. However, there is a better way to do that might be a bit faster. Check out This example of community . It defines alarming features one by one and then they committed at the same time, which is more effective.

  Otherwise, it is not really a good way to speed it up. 400 shared variables is many things to manage.

• NI6602 pulse width measurement: do I have to use an external sample clock?

  Hello

  In the example .NET 4 "MeasPulseWidthBuf_SmplClk_Cont", it is said in the comments that:

  An external sample clock should be used.

  Hi mola.

  This specific example measures of sample-clocked pulse width.  This type of measure is supported only on new hardware such as the X series cards and will not run on the 6602.

  Your application that you have linked uses Implicit timing, which means that the signal is using the sample clock.  In other words, at the end of each pulse duration which can be measured, the sample is deterministic locked in.  So you end up with a table in the buffer of each pulse width which is seen by the meter.

  Best regards

• Support adding custom box in an application built in LabVIEW 2009

  Hello

  Can someone please help me add custom box in an application built in LabVIEW 2009? I had successfully built my application in labview 8.6, 8.5 and 8.2 before including custom on the box. However, when I tried the same method in LabVIEW 2009, it only shows about LabVIEW 2009 box rather than my custom on the box.

  Here's what I did:

  (1) a written one "on Application.vi" in the folder VI built;

  (2) included this "On Application.vi" in the "Still included" section in Application source files to build;

  (3) built on demand;

  (4) Ran the built application, the box about showed only LabVIEW 2009 subject (attached a picture).

  You can see that it is my custom icon on the top left corner of the image.

  Your help is greatly appreciated,

  Cathy

  Thanks Christian. To place a check mark in the 'use LabVIEW 8.x file layout' box did not work. I found a solution although LabVIEW 2009 has this inherent problem of not showing custom on the box, and there f2 patch to fix this problem.

  Cathy

• For 2 years, I used the built in camera 1.3, suddenly out of dissappeared and when I click it it says is not installed.

  For 2 years, I used the built in camera 1.3, somehow suddenly dissappeared and when I click on says it is not installed, I don't want to go into a repair shop because they charge you too much money. Please help, thanks. my pc is windows 7.

  Original title: built in webcam 1.3

  Hi, Nancy,.

  Control Panel > add a device

  Windows will search for devices connected to your system, but not installed. Click on the name of the webcam which shows in the search box and then click "next".

  Choose whether you want Windows to search for the device driver webcam using Windows Update on the Internet, or if you prefer research of Device Manager to the driver using a disc provided by the manufacturer of your laptop. Most of the drivers are on the system recovery disk included with your laptop, if you choose to add the driver from the disk. Check the box of your choice, then click on "next >" to continue.

  Wait while Windows searches from the driver using Windows Update, if that is your choice. There's an active Internet connection for Windows to do successfully. Allow the computer to install the driver and then restart the system for the webcam to be recognized by the system.

  Otherwise, you can use the system recovery disk or a driver downloaded directly from the manufacturer of your laptop to install the driver without using search Windows Update.

  Open the CD/DVD-ROM drive and insert the disc of recovery system or place the driver downloaded from the manufacturer in a directory of files easily accessible on your PC, or on the desktop, or in your 'My Documents' folder.

  Choose the option 'install the software automatically (recommended)' into the application 'Add a device', then press on "Next >" to start looking for your webcam driver. The Hardware Wizard will search the system recovery disk and automatically installs the driver. Press 'Finish' to close the wizard, and then restart the computer to allow the recognition of the webcam. Choose the option "Install the software manually" in order to access the location of the driver where you saved the driver and install it from there. Use the open file manager and search for the driver. Click on the ' next > ' button to install the driver, and then restart the computer to add webcam functionality. -ehow.com

  Built in webcam not working not not in Windows 7