Reader of CD/DVD of Equium recognizes not all files

Similar Questions

• Upgrade XP to Windows 7, computer recognizes not all files on drive E:

  Buy Windows 7 Professional Upgrade from amazon.com. Computer XP, does not recognize the DVD when inserted. I think that the E: drive is CD/RW, not DVD. No hope or help?

  Hello

  1 how many optical drives you have connected to the computer? What is the brand and model of these readers?
  2. are you able to read any CD?
  3. this happens with some special DVD?
  4. have you tried the same DVD on another computer?

  We need more specific information to help you better. Also remember that CD players will not read or write any DVD.

• Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

  I just bought a Camileo s10 camcoder.
  So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

  I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

  I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

  Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

  I looked for answers almost anywhere, but so far I have had no response

  Hello nikfam,

  I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
  He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

  Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
  Please take a look at the right format.

  Have you tried another usb port? If you use a hub, check that there is enough power.
  I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

  welcome them

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• Belkins wireless adapter recognizes not all wifi networks

  I have a Belkins wireless adapter for my pc and try to connect to a wireless network. My adapter recognizes not all wifi networks and I know that there is on the functioning of the House. How can I fix it?

  Laptop?  If you know that there is a wireless network in your home because the other computers are connected to him, the most likely cause is that the wireless adapter is disabled (a physical switch or a combination of keys Fn + Fkey).

  For additional help, please indicate the make and model of your computer (and your wireless adapter, if it is not integrated), as well as the version of Windows you have, including the service pack.

• Lightroom recognizes not all my photos on my external hard drive?

  Lightroom recognizes not all my photos on my external hard drive, he sees the part of a file, but not all the files it contains. Virtually everything is there except that one folder, it says all were imported, but they don't show...

  If you wwant photos will show up in Lightroom on your external drive, you must (in Lightroom), do a right click on the folder on your internal drive that has photos and select Update folder location. Then select the appropriate external hard disk folder. You may get a message asking if you want to merge files, allow this merger.

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA

• Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T.

  Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T. I just need to download the SENT MESSAGES, Inbox not only.

  Re: Where is 'account settings '.
  If you do not see 'Tools', then you do not have your active 'Menu Bar'.
  See picture below on the activation of all the toolbars make life easier.

  Different methods of location of the 'account settings ':
  Via the toolbar "Menu Bar":

  • Tools > accounts settings

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".

  Via "Menu Icon.

  • Menu icon > Options > account settings

  Re: I need to download sent Messages Inbox not only.
  E-mail accounts IMAP see a remote view of the files on the server.
  You subscribe to view these folders in Thunderbird.
  You synchronize directories subscribed for a copy in Thunderbird.
  What you do in a folder for example imap: delete, will occur on the server, so viewing via webmail or Thunderbird folders appear identical.

  However, in your case, it seems that you have created a POP e-mail account.
  E-mail POP accounts can only connect to Inbox server and download server Inbox for the Thunderbird Inbox pop e-mail account.
  It's not a quirk of Thunderbird; This is how all Pop mail represents the work.

  There is a work around to get "sent" in the folder mail sent from server in Thunderbird. You just do it once, because when you send it through Thunderbird, it will put the e-mails in the folder sent TB pop mail account and not on the server.

  Thunderbird creates a "Sent" folder when first send you an email.
  So, if you have not yet sent an email, please send one, even if only to yourself.

  Then, move all inbox emails in the appropriate folders.
  You can create new folders to organize them.

  How to create a new folder:

  • Right-click on the name of the e-mail account, and then select "new folder."
  • Give an appropriate file name and click "create a folder".

  When the Inbox is empty:

  • Logon to the Web e-mail account by using a browser.
  • Move all emails "Sent" in the "Inbox".

  In thunderbird:

  • Click on 'Get the message'

  all the "Sent" emails must get downloaded from the server Inbox anto your Inbox in Thunderbird.

  • Then move all your emails in the 'Sent' Thunderbird folder.

  You should now have all these emails downloaded from the server and display in Thunderbird.

• my e drive won't read my popular dvd set, but did not work

  can not play dvd does not read that the reinstalled dvd optiarc didn't always help ran set yet, it does not play, but he will play cd

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Open dialog box appears only not all files

  I just bought a new iMac (Yosemite 10.10.5 running version) and I have a problem with Illustrator (race 2015.1.0) when I try to 'open' or 'save' a document all my files in any folder are not displayed.  No matter how big or small the dialog box is that all files are more fit in this box.  It's a little hard to explain so I enclose a photo.  There are dozens of additional files that should be showing in this area.  On the right side of the box, you can see how file names are cut off.  There is more to the right of that.  I'm not able to reproduce the problem in photoshop or any other program on my computer so I figure it's a framework or a problem in illustrator.  Anyone can shed some light on this?

  I do not wish to use the column view that I need preview buttons.

  

  ammyzan,

  If you use the column view, run away until Apple has resolved the issues.

  I think that the good order/way is to update the operating system, and then reinstall the applications. Which was how you did it?

  If this isn't the case, it may be best to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Equium L40 DVD Multi drive - do not burn files to DVD

  Hello

  Whenever I try to burn files to DVD discs using my dvd/rw drive, it holds in check the same point and comes with the invalid 'MS-DOS function' error. CDs write very well that it's just the DVD.

  Please could someone help with this problem?

  Equium L40 series
  Vista operating system
  My * a DVD-RAM UJ-850 s

  Hello

  What burning software did you use?

  I use Nero, and I've never had any problems!

• DVD Player displays only not the files on disk?

  My dvd player does not open the files on a data disc, he is coming as a blank disc, but if I try it on another computer the files are on the disc? I don't know why please can anyone help?

  I think you can try a number of things here.

  1. put to UPDATE the reader, 2 REINJSTALL the driver.

  Both involve the following steps: click the startup type in the search box Device Manager, I usually get to DEV and it hits the top of the list, click on anyway and it will open the window of permission, click on continue or enter the password and this will open Device Manager which will show all the devices on your computer. Now search for CD-ROM/DVD-ROM drives and click on the + sign next to it and a drop-down list will appear and if you RIGHT click a MENU will appear with the following choices, software update driver, disable, uninstall, look for changes on the material and properties.

  Now, here's the choice 1 click on update driver will open a window that says two things search your computer or line choose SEARCH ON LINE. If she comes back and says you have the latest version of the software, then choose option 2 click RIGHT on the disc again is it closed and choose uninstall. When you do this RESTART YOUR COMPUTER and the driver will be reinstalled as new when it restarts.

  Good luck

  RickS

• RE3000w recognizes not all signals from my router

  Howdy,

  My router has a 5 Ghz and 2.5 Ghz signals. When I used the installation program, the software reported only 2.5 signal. I would prefer much more powerful signal, but it does not list it after several attempts. The software displays all other signals in my neighborhood so I know that can be done.

  I click the button "my router is hidden" and towards the top has a form. I filled with information from my router, but then the software does not even signal 2.5.

  So I finally put it to use the signal 2.5 but man, it's a loss of signal is good. How can I get the software to recognize both my signals?

  Dangrsdan

  Hi dangrsdan. I don't think that the RE3000W will never connect to the band of 5 GHz of your router, since this extender model is a single tape device and supports only the 2.4 GHz band.

• Flash recognizes not all my HTML Tags

  I load content in a Flash text box item via an XML file, in the XML I'm formatting via HTML, problem is only flash seems to recognize some tags and some don't. For example he has no problem with the < p >, < br > < ul > tags, but refuses to acknowledge any picture or link to anchor/tags.

  here a sample of my XML

  <pageText>
       <![CDATA[
            <html>
                 <div>
                      <font size="15" face="arial">
                           <p>first paragaraph of text here</p><br>
  
                           <ul fontSize="12">
                                <li>Bullet point info here.</li>
                                <li>Bullet point info here.</li>
                                <li>Bullet point info here.</li>
  
                           </ul>
    
                           <br>
    
                           <p>Some informative text here. <a href="https://www.myURL/index.html"> Just click here </a> More informative info here</p>
                     </font>
                 </div>
            </html>
       ]]>
  </pageText>
  
  

  within my TextArea class that extends from the fl.controls.TextArea:

  private function UpdateText(event:ChangePageTextEvent):void
  {
       this.condenseWhite = true;
       this._html = true;
  
  
       this.htmlText = event.payload; //payload is the contents of the XML <pageText> tag
  }
  
  

  Flash will not make the link. It will show you all the text but not the link.

  Any ideas or info would be awsome.

  Flash supports only a small number of html tags.  You can find a complete list of them in the section TextField.htmlText help documentation.  Anchor tags and image tags are included, so your problem, it might be in the way which integrate you them.

  If the anchor tag does not work for you, you might want to check a little more close just to see if this is the link or not.  Links are not underlined if it is an expectation.  One thing that could be a problem, it's that you use double quotes inside these tags you give you a problem.  You can try either escpang tose doublequotes ("as in-") or use instead of single quotes.