Reader superDrive will not read audio CD & DVD of movie most

Similar Questions

• My windows will not recognize my CD/DVD drive

  My computer crashed recently and since then windows will not recognize my CD/DVD drive. My removable disk (e :)) is there, but I was told that windows cannot access the disk.) Also when I try to eject a developed error warning.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Burned DVD will not play on a DVD player

  I downloaded a 22 minute video I want to burn to a DVD in my DVD player.  I tried on the DVD-R and DVD + R.  They burn the disk but will not play on the DVD player.  The error message indicates that the reading is not available on this disc.  I used the windows search support to problem solve on my own, but have had no success.  I made sure that I am selecting the option of CD/DVD drive to use the ISO image format.  I entered my option and I have no filters.  I have the video on NTSC format since I'm Pennsylvania / U.S..  I have not tried burning on slow or average speed because it burns the DVD without problem it just will not playback on the DVD player.  What do you recommend as my next plan of action for troubleshooting.

  I guess that the video is not DVD compatible Mpeg2.  According to the DVD player, some will play other formats, too.  If there is no program for video on the computer, try Windows Movie Maker (free) to see if the video will too be converted to standard DVD Mpeg2.

• T520 will not use any device DVD

  People,

  I was going to do a backup, when I noticed that the DVD player was no longer under my computer.

  I when in Device Manager, where he showed with a yellow X... I tried to update the device driver, it said that I had the right device. I've done many other things - nothing has worked.

  I really wanted to get the backup made, so I took my portable DVD player/burner and plugged. The laptop computer found a loaded device OK... but it does not appear in my computer. I had the same problem as the DVD drive internal.

  Then I got a USB drive external Passport, connected to the same USB port, no problems... He mounted the disk and I made the backup.

  My T520 will not use any device DVD... ideas?

  -Fred

  I did a quick search and voila. See the Windows 7 box.

  http://support.Microsoft.com/kb/314060

• disc CD - r will not play using a DVD player

  When I create a movie with movie maker cd - r disc will not play on a dvd player. It comes up with 'unknown disc '. Where I'm going wrong?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Unknown disk error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It is always better if you include your question in the body of your message.

  Unless you had a special software that would create a video CD (VCD) your
  free-standing DVD player won't play (and even then... your DVD
  Player must be compatible with VCD, and some are not)

  Try to use a cache of DVD with Windows DVD Maker. The following links may
  be worth a visit:

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• CD will not play using a DVD player

  Director of Windows

  After a musical slide show on cd it will play fine on my pc, however I cann t he can read on my dvd / tv player. I use Fuji-r discs.

  When you use the same disks to record music only files I have no trouble to play them on my dvd/tv

  IAM a PAO and starting with the PC and would like to receive no assistance. Roy

  After a musical slide show on cd it will play fine on my pc, however I cann t he can read on my dvd / tv player. I use Fuji-r discs.

  When you use the same disks to record music only files I have no trouble to play them on my dvd/tv

  IAM a PAO and starting with the PC and would like to receive no assistance. Roy

  ========================================
  If you want your CD with video to play on a free-standing DVD
  Player, you will need to create a VCD (Video CD)... This requires
  Special software. (and not all DVD players will recognize a VCD...)
  Check your manual DVD player for compatibility).

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker DVD will not play in my DVD of Emerson drive

  Burned DVD won't play in my dvd player. I worked on it for three days. I burned a movie on a dvd + rw disc. The film will play on my computer but won't play in my dvd player. I get "Disk error" on the screen and the disc may not have playback function. What is the function of reading and how I can change my download? I lived all the concepts of self-help, but none of them fit to my problem. I have Windows Vista Premium and have tried using Windows DVD Maker. I called the manufacturer of my drive and they said I need to finalize the disc. How can I do to do this with Windows DVD MAKER?  I read articles about video editing, but when I went through the steps that I wasn't even offered the possibility to publish the video. My brother uses the same discs when burning movies and I have no problem playing his films. What I am doing wrong?

  Hi BrookeMcCulley,

  Welcome to the Microsoft Answers community.

  On some of the DVD player, you will not be able to play DVD + RW discs.  You will need to use DVD + r (read DVD) drive and check if it works.

  You can also try to use another brand of DVD disc and check.
  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/close-or-finalize-a-CD-or-DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• HP dv6t 1200 MediaSmart app will not play blu ray dvd. Keeps wanting me to check updates

  Continuous just ask application check the updates. If I select Yes or no it displays the disc is ready and just press play to start playing. Disc will not play only.

  Any help

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu ray now playing the discs OK.

  Kind regards

  DP - K

• Film on dvd Creator project. Plays fine in media player. Will not play in the dvd player.

  The project with photos and music. None of the effects or transitions. Project play 100% in movie maker after completion. Said created sucessful and raises questions to save on another cd. Plays correctly in computer with media player, but does not play in any dvd player.

  The project with photos and music. None of the effects or transitions. Project play 100% in movie maker after completion. Said created sucessful and raises questions to save on another cd. Plays correctly in computer with media player, but does not play in any dvd player.

  ========================================
  You have posted in a forum of WinXP, so I think that you are running
  WinXP?

  The project must be saved in a folder on your hard drive
  in the WMV or DV - AVI movie format and then on DVD
  using DVD Authoring software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Creating custom profiles
  for Windows Movie Maker 2
  http://www.Microsoft.com/windowsxp/using/MovieMaker/expert/CustomProfile.mspx

  Now to create the DVD...

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When I put a movie on a cd it will not play on my dvd player

  When I did a movie using windows movie maker, when it comes to play on my dvd player it will not work?

  Since you have posted in a forum XP... I assume you are using XP?

  You create to play in a free-standing DVD player...
  a video DVD instead of a CD. (, You'll need a DVD burner,
  a DVD creation software and DVDs)

  If your Movie Maker project is saved in the. Film WMV format...
  Maybe one of the following freeware programs will help you
  create a video DVD.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD-flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Download from (direct link) is the fastest).

  AVStoDVD
  http://www.videohelp.com/tools/AVSTODVD
  (the download is: "AVStoDVD_242_Install.exe")
  (Download from (direct link) is the fastest).

• HP Pavilion dv7 will not play audio via HDMI

  Hi I noticed recently that my laptop Pavilion dv7 entertainment will not play sound through the TV. The image is on the tv but its is running through the speakers of the laptop? I never had a problem with it until now. When I open the sound options, the ATI HDMI says it is not connected and it won't let me select it so it is connected? Help, please?

  Best regards, Sez.

  Sez Hi,

  Try to use Recovery Manager to reinstall your graphics driver AMD package as this will also reinstall the driver Audio HDMI AMD - how to use the Recovery Manager to reinstall the software and drivers is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Dimension D drive recognizes and 3000, but will not play two CD / DVDs. Says drive works properly

  Drive DVD (d) properties

  Material:

  WDC WD800BB - 75JHAO Type hard drive

  SAMSUNG DVD - ROM SD - 616E Type CD-ROM/DVD-ROM

  Slot 0 for both.

  System says that the device is functioning properly. I can't update, because I get a message that I have the most up to date available. I did the whole 'uninstall '. Once the computer is restarted, I got the "found new hardware". Yet, nothing. Only a few time a hourglass jumped to the top, but nothing has happened.

  The computer simply will not play anything - no CD-ROM, dvd or cd. Instead, the drive blinks several times and does nothing.

  However, the computer not only recognizes the drive, but if I hit eject. The disk opens. Once I put a cd/dvd/CD, the computer always says "Please insert a disk into drive D:".

  Help, please. And I thank you in advance.

  
  

• Will not open audio .mp4 on CS6

  Hi all

  I just installed hearing CS6 on a new computer (Windows 8.1) and have found that the program will not be open to the audio portion of a file .mp4 video when I try to import it. My old Windows 7 machine could do without problem. Is there some codec I need to install in AU to make this work? I installed Quicktime 7.7.7 on the new system without success. What might be missing?

  Thanks in advance for any help.

  -Steven B.

  Ah, of course. Fortunately, it was an easy, simple solution to restart my computer after installing the latest version of Quicktime (7.7.7). That's all! After that I could open .mp4 in AU immediately without any problem.

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• Satellite Pro A60 will not start up CD/DVD

  I have the above and it does not start from cd/dvd. I know that the cd/dvd is bootable and works well. I can boot from the floppy drive and access the cd/dvd without problem, but that dose not allow me to load windows XP. If this is not the drive or the cd/dvd. So what is the problem?

  Paul

  Hello

  How did you try to boot from the CD drive?
  Have you tried to press the C key immediately after starting the laptop?

  Alternatively, you can press F12. The start menu should appear and you should be able to choose the drive as a boot device.