Reading and updating of MS Active Directory (AD) by Oracle APEX

Similar Questions

• unloading of feature to make dhcp off the WLC and put it on Active Directory.

  I need to use the feature of unloading to dhcp off the WLC and put it on Active Directory.  Someone at - it a walkthrough or a page for this?  I know it's just a checkbox and a redirect to the new dhcp server, but where the hell is the configuration on the WLC?

  Thank you!

  -anne

  You can go there.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001001.html

  Point to your existing ad integrated DHCP server.

• Update of the Active directory through IOM domain

  Hi all
  
  I have configured AD with IOM. The user is getting stocked with AD.
  
  But if I make a few changes in the profile of the user as city, post office address, country, they do not think in Active Directory.
  
  On the other hand, if I change my name, name, username, then these fields are translated into Active Directory.
  
  Why it's happening?
  
  Can someone please explain this to me? And how do I get my first requirement either update the city of e-mail, zip, country, etc..
  
  Thank you very much in advance!
  
  Waiting for your answers!

  Process triggers
  A quick definition of two variants of the process triggers, it should be noted that triggers run only a process task, that they do not have anything else, if you want forms or resources to be updated it is the function of the adapter to process task.

  User profile triggers
  These starting from changes in the user profile. The 'Lookup.USR_PROCESS_TRIGGERS' table defines the fields in the user profile have triggers and which deal with the tasks they will undertake.

  Form triggers
  These from service users changes to a form of process associated with a resource. Triggered tasks are defined by name only and should be named after the form field that you want to that they apply, with the suffix 'Updated' for example 'city updated '.

  Please note that the data on a form of resource process will not change by changing the user profile only, usually the task named as the trigger of profile task can be used to change the value of process. If you change the shape of course, in this way, then the task of form subsequently trigger, and you can make a change to the resource of the change in the form.

  To get a user based profile trigger to work just to extend the table of Lookup.USR_PROCESS_TRIGGERS and create the task you name in this table in a process of resource definition. Even if the task doesn't a change in the user profile will trigger the process task corresponding to the resource for this user.

  Kind regards
  Ian

  Published by: user809225 on November 28, 2008 03:25

  Published by: user809225 on November 28, 2008 03:32

• Where to download and how to install Active Directory in Windows 7

  I think that I installed it (title) partially. I have something that is our main servers of the subnet by name. But I can't find anything executable that allows me to reset the passwords of authorized users. I installed once on Win 7 Pro, but I had to crush this system for other reasons. On this system, I even had the executable that is pinned to the taskbar.   Can someone help me, please?

  Hello

  Ask the TechNet and Windows 7 IT Pro forums server. This is where
  Active Directory is taken in charge and not the answers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  Thanks, I did & hope it helps. I misunderstood you at the first, sorry!

• Replication of ACS and integration with the Active directory database

  Hi all

  I have to configure two ACS SE with the internal database replication. I have also a server active directory that must integrate with ACS. My doubt is that I need to configure the IP address of the ACS during installation of the remote agent on active directory or only the primary ACS

  No need to give the IP of two ACS. Give the primary IP of ACS.

  Kind regards

  ~ JG

  Note the useful messages

• "google chrome can not read and write in its data directory '... WHY?

  I used free Windows cleaning tool; theres now load problems. When I reboot works very little?

  [Moved from comments]

  Where did you get this "tool"?

  You have not provided enough information.

  HOW TO ASK A QUESTION:
  http://support.Microsoft.com/kb/555375

• Configure Active Directory and form WLS and human task

  Hi guys,.
  
  We use SOA Suite 11.1.6 for the current project and want to configure Active Directory as an identity provider. I know this is not a new issue and has made several researches on the forum and online, but do not meet all of our questions. Currently, in the field of security WL, we see users and groups in the AD. But there are questions still pending:
  
  1 authentication with users of the AD
  We can not yet to configure user connection WLS AD.
  
  2. e-mail users
  The AD user does not appear in the search for email in jdeveloper. Currently, there are only two users returned: weblogic and oraclesystemuser. I think they're the default users.
  
  3 WorkList Application (human task)
  It is similar to the #1, but not all. We like to configure AD users to log on to the application of the task list.
  
  Any suggestions are appreciated.
  
  Thank you
  Steven
  
  Published by: sw12345 on April 27, 2012 11:49

  Hi Steven
  1. what you want is possible, BUT you can have your users only in a security provider. To access/bpm workspace, all users will be designated in the first highest security provider of the page. So make sure, your AD authenticator is the highest and also all of these providers must be defined on ENOUGH / OPTIONAL.

  Below, these 2 positions should give more details:
  WebLogic administrator account is inactive after activating the authenticator DB
  Re: Workspace 11g BPM don't Show no user of OVD - highest authentication provider page

  Thank you
  Ravi Jegga

• Oracle Forms and Microsoft Active Directory

  Application server = 10.1.2.2.0
  Database server = 10.2.0.3.0
  
  We have a connection to a database (for example abcd/abcd@abcd). The login is in the formsweb.cfg file.
  
  Users click a URL that opens the first form (10g), where they must enter their username and password. The "When-new-form-Instance" trigger will use the data entered to check the username and password is correct on a users Table. It will also recover the level of security for members of the staff.
  
  If authentication fails, a message in a form and they can not go further.
  
  If authentication is successful then the first form of the system is displayed. The level of security is used to decide what forms/States are available for this user and the data that is displayed. The user ID is used throughout the system to save the changes made by the user.
  
  We went to Microsoft Active Directory and I have a requirement to allow a user to simply click on a link and the application opens with the data and access. I also need the user ID in the application.
  
  Is it possible to either from the Microsoft Active Directory for the Oracle Forms user ID or is there a way to recover it from in Oracle Forms.
  
  Thanks in advance
  Michael

  I seem to remember that we did in an installation of web Forms6i a few years ago.

  We used the ONE LOGON trigger to invoke the DBMS_LDAP package to interact with the microsoft server active dir.

  There are several ways to do it now with SSO also.

  Tony

• Provisioning of password in Active Directory and TCP ports

  Hello
  
  -I want available to users and their passwords in Active Directory
  -J' need to declare precisely what TCP ports that I use to have open in the FW:
  -TCP port if an IDM and the gateway (or server connector): 9278 (or 8759)
  -some ports between gateway and AD.
  
  Can someone tell me what ports I need between catwalk and IDM? I tried 389 and 636, but this is obviously not sufficient...
  
  Thank you.

  OK, let me tell you how it works then ;-)

  -I am speaking here of the AD adapter only, and not the connector (I'll dig this one later)
  -In the resource configuration page, you can choose the type of encryption: none, SSL, or Kerberos.

  -None:
  everything is done on the LDAP port (389) except password management which is done on port TCP 445 (Microsoft proprietary protocol)
  If 445 is blocked, no password provisioning is done and you will see the bridge trying to reach the ad on this port try ICMP (ping), then give up.

  -SSL:
  everything is done on LDAP 636. Everything.
  Why it does not work at first on my environment:
  -a been configured correctly AD? Yep: private key in the local computer AD certificate store, CA in the trusted CA on the local computer data store
  -have I forgotten to configure something on the side of the door? No, CA has been properly placed in the trusted CA on the local computer store
  -the fact that I made typo somewhere? Nope.
  -What I forgot, it is to restart the gateway service after having put the certificate in the trusted CA data store. And given that the computer does not restart for more than a month, the gateway service was not properly SSL-protocol of communication with AD...

  -Kerberos:
  I do not tried this mode. (I wanted the standard LDAP bind for some reason)

  now I can start growing hair again...

• simultaneous reading and writing on a PDM file

  I found similar discussions on here, but none that satisfied my problem. I'm running several loops within a vi, which writes data in a permanently .tdms file. Another loop to finish its task from the start in a test, and I want to transition this loop so that it accesses the file writing and started writing on a network. It also enables me to check that the data is being stored in the file and that it is corrupt.

  I started with just the basics, but when I pass the second loop to read the file that is is always written off mistakes, saying that she met at the end of the file. It does if I put the count 1, -1 or anything in between. It illuminates, however, the end of the file output.

  I have the entry in the file tdms on PDM read wired to a local variable, just as I do writing PDM, they all have both read the same thing and I get an iterations of a data value of the reading, so, apparently, file access is no problem. And I have to someone who cringed to local variables, ensure that reading and writing are not activated until the local variable is updated.

  Try to set the "group name" entry on «TDMS read» If you write more than one group, you can use "View the contents of the DDHN" in order to get a list of groups.

  Herbert

• Message "Active Directory Domain Services unavailable"

  I am running Win7 Home Premium and get the message "Active Directory Domain Services is currently unavailable".  I can't print or to set up a printer from ALL software, or any of my software does see my printers.  As everyone with this problem, my computer is a doorstop expensive if I can't print.  I tried all the fixes listed and none of them work.  Microsoft is working on a fix?  If so, how long we see?

  Hello

  Thank you for the update.

  I suggest to refer to the following article and follow the steps.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Active Directory domain services ensure the storage of hierarchical data, structured and secure for objects in a network such as users, computers, printers, and services. Active Directory Domain Services are supported location and use of these objects.

  Reference:

  Can't print, copy or scan of my computer with my all-in-one printer

  http://support.en.kodak.com/app/answers/detail/A_ID/7359/kW/cannot%20print/selected/true

  Get back to us with the State of the question.

• Windows cannot boot mode safe (Active Directory repair)

  Hi, I tried to get into the Mode safe on my desktop Windows 8 and I chose the 'Active Directory repair' option in the msconfig window. After the reboot, all I get is a blue screen with no login field and absolutely nothing to do except close down and restart. Is there a way to disable "Active Directory repair" and return to the normal startup mode without having access to the office. I do not have a Windows 8 DVD with me because I've updated online.

  Herea picture of the blue white screen.
  Thank you!

  Hold down the SHIFT key when you click restart on the power to the menu screen.  It will take you to a place of recovery, that you can use to run system restore and to 'come back' until you have made the change.

• OracleServiceXE does not start after the installation of Active Directory

  Hello people,
  
  New to Oracle but competent in general I.T. stuff. Client has contacted saying the role Active Directory is installed on the box Server 2008 operates as a virtual machine. After which client could access is no longer remote server and subsequently deleted from Active Directory. Since then, OracleServiceXE will not start and no response on the homepage of Oracle apex / http://127.0.0.1:8080 / f? p = 4950.
  
  I see a lot of other posts here for a resolution of the problems that led to the relocation of the software. We are OK with that. However, I would check the database of the customer will be able to be put back in place after reinstalling? If so, what is this process please?
  
  We are open to troubleshooting and so if there is a solution relatively easy but otherwise open to reinstall.
  
  We are open to paid support if necessary that the client has been down for a few days now.
  
  Please help!
  
  Thank you
  
  Jon

  JL09 wrote:
  VALID 4.1.1.00.23
  APEX_040100 AUGUST 20, 2012 14:45:38

  XE includes Apex version is 4.0.2 I believe, so 4.1.1 would mean an upgrade has been done or at least tried. This is consistent with the loss of the app to start and perhaps also the http port disabled.

  I would like to ask if anyone knows on the upgrade of the Apex, especially for about 20 August.

  Of course, there is the theoretical possibility that db restored files came from a different set of installation/database XE, why we see Apex upgraded, etc.

  You have an install*.log file? (install.log)

  Perhaps it is a facility of the Group of hotfixes. You have all the files matching a search for the apxpatch. * ?

  Get the login page will once again, try the step install message update (download) the Images directory, upgrade installed by installation guide (or group of patches note).

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21673/otn_install.htm#BHAJIGDA
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/411-Patchset-notes-1528994.html#CHDIHHHD

  Published by: orafad on November 4, 2012 23:44

  Published by: orafad on November 4, 2012 23:54

• LDAP (Active Directory) questioning 'current user '.

  I went through a lot of things on it, but I would appreciate a response summary of this (probably...) FAQ:

  Using CF (latest and greatest) on a (I presume) IIS server, I want to be able to automatically detect the Windows identity of "the currently logged in Windows user" and through queries LDAP (Active Directory), determine its attributes and the membership authentication purposes.  The user would not be questioned to get into any sort of username or password on his.  (This is strictly an intranet application and always will be).

  In the Apache mod_ldapserver environment, I know that reliable information about the currently logged-in user can come from environment variables to make the following LDAP queries.  But I'm a little fuzzy on what I might expect/use in this situation.

  Pointers?  Hyperlinks?  Advice?

  With Windows IIS on a Windows Server in a Windows domain to a Windows client using a Windows browser it can be done easily.

  If "Windows integrated security" is selected in the IIS administrator and "Logon Anymous" is NOT checked, then the variable cgi.auth_user will be poplulate by the web server with the domain/user name of the user logged on to the client computer.

  It's pretty simple to access this cgi.auth_user value and use it in a tag to read the record of the current directory for more information about this user.

• Strategy of Kerberos WinServer2008r2 Active Directory group

  Hi all

  Need help bad in this. I'm trying to implement kerberos on my active directory. What I understand is kerberos is the default and the primary authentication protocol used when connected to a domain, but where and how do I configure kerberos settings in group policy? I managed to find configurations of kerberos in the "Local Group Policy Editor", but this would not push configurations to my clients right?

  I want to disable NTLM authentication as well and once again I can found under local policies > security options, but they are all local policies right? Is it possible that I can disable NTLM on my active directory and ensure that these settings are applied to my both client computers?

  Thank you so much in advance!
  PS: Sorry if I got some of my facts wrong, I'm a student performs internship and my understanding in active directory is not as strong.

  Server forums are more on the side the web site of Microsoft TechNet,
  This is where you find people who know.

  http://social.technet.Microsoft.com/forums/en-us/categories