"google chrome can not read and write in its data directory '... WHY?

Similar Questions

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• Satellite M100 - can only read and write CDs.

  Hello
  I use a Satellite M100 Version PSMA0L-18203E on windows xp sp3. My DVD writer model is HL-DT-ST DVDRAM GMA-4082N.

  The problem is an am able to read and write Cd but when I insert a blank dvd, it displays "Please insert a disk in the drive" so that I am able to use Recovery DVD ROM from Toshiba with no problems. Please help me.

  Hello

  As wrote Al - Ex what program you use to burn discs? I have good experience with Nero and CD Burner XP. Can you test with one of them, please?

  In addition, you must also use high quality media. I have good experience with the types of DVD-R Verbatim and TDK.
  What DVD's that you have?

• I can play Bluray discs but can not read or write any DVD or CD.

  I can play bluray disc but can't read or write all other dvd or cd discs. It is said that there is no disk of course. light in the drive, it starts flashing, then it stops.any ideas. Thank you

  original title: combo drive problem

  Sounds like the Blu - ray player should be repaired or replaced.

• M30x-118 DVD not read and write all formats

  Having problem with m30x-118 (Mat * a uj-820 s). It is not reading the cd - r/rw and DVD + r/rw but read commercial perfectly all cd/dvd - like video dvd or toshiba installation cd.
  While trying to open the disc - "d:\ is not accessible incorrect function" appears.
  Nero recognizes empty disk inserted, but having power calibration error.

  Ramasst running, driver dvd reinstall does not help.

  Hello

  The "power calibration error" message is a problem that occurs with the more recent writers as older. These means of error message that the CD/DVD writer cannot write in the blank CD/DVD because it can t match the output power of the laser power to write CD/DVD.

  Please check this page useful:
  http://www.electricattic.NET/en/mediumspeederror.htm
  http://www.dvdplusvideo.com/dvdguide001.html

  You will find an advice and information why these problems occur.

• Satellite 1410-801: Drive is not read and write many CDs

  Problem with Toshiba DVD - ROM SD-R2212 Drive on a Satellite S1410-801.
  Help, please!
  My drive doesn't read many CDs and I can't write any CD too?

  Hi Wade

  The fact is that readers cannot read all cd or dvd media.
  You should first check different media from different manufacturers.
  As far as I know, you should find a list with the media CD and DVD tested and supported in the user manual.
  I use the TDKs and I m very happy

• DVD RW drive (D :) will not read or write DVDs)

  My computer can not read and write DVDs and CDs.  Please tell me how to solve the problems.

  Thank you very much!

  Sue

  Hello

  Someone helped me to fix my computer, the problem disappeared.

  Thank you very much.

  Sue

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Whenever I insert a USB in my PC is not autoplay, I do not have available to all group policy, and I can't read or write CD/DVD

  Original title: "Autoplay, group policy and CD/DVD"

  Hello

  I have two questions actually worry,

  First of all, I have Windows Vista Home Premium Service Pack 1 installed on my PC

  My first problem is that whenver I insert a USB in my PC it doesn't autoplay and the option is not available at all even when I get clich the drive itself, I went Microsoft support and installed security update 950582 and still no hope. I also can't find the NoDriveAutoRun or NoDriveTypeAutoRun in the registry because I don't have the key explore in both policies.

  In addition, I have not available to all group policy.

  My second question is that I can't read or write CD/DVD even if I have the driver installed, I tried the DVD Microsoft repair but it shows that the repair failed.

  Thanks in advance and hope to receive a solution soon.

  SAS ING.

  Hi Sas Eng,

  There are a few solutions to the question of automatic playback on the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  And if the solutions provided for the DVD ROM Lorien did not help, as you say, it is probably a hardware fault.

  Try the steps are on the link and let me know if it helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Read and write of series Basic can't read a second time

  Hi, I'm developing my own VI to write and read an iRobot Create.  I based my vi off the coast of the basic series example write and Read.vi I found (on LabView 8.0).  When I run my vi I am able to read information from the beginning to create, but I am unable to read a second time (after a write command).  The second reading should be the same as the first (I checked with the help of another program that is linked to the creation).  I am new to using LabVIEW and I was wondering if there is a common mistake made by trying to implement a series of read and write.

  Thank you.

  First of all, to debug your orders with a program such as Hyperterminal. If it works there, then it should work in LabVIEW. You may need to send a carriage return and newline (\r\n). Your code is not currently set up to do.

  Only do something when a button is basic programming LabVIEW. You can use a simple while loop with a façade that Boolean connected to an instruction box. If you have anything other than the basic version of LabVIEW, you should use the structure of the event. Look at the examples that come with LabVIEW.

• I read and write English but my husband reads and writes in Russian. How can I activate the taskbar of the Russian language?

  My husband is from the Russia.  It reads and writes in Russian and I'm having a problem turning on the Russian keyboard.  I went many steps of the menu start, Control Panel, regional and language options, languages, details.  I added the Russian.  under the Russia, there is a symble of a keyboard than Russian (typewriter) Russia and the United States.  acorrdign at every stage, there should be a tab in the bar of tasks showing that I can switch bewteen eglish and Russian.  who does not come to the top.  I have check the tab bar of language and made sure all the boxes are ticked, but I still can't find the language bar. what I am doing wrong?

  I don't need a translator who is the other thing that I still find.  I need for my husband who bought the computer to be able to type in Russian, his mother tongue.

  Thank you for your time,

  Heather

  See if that helps you

  http://Office.Microsoft.com/en-GB/Outlook-help/switch-between-different-languages-by-using-the-language-bar-HA010362283.aspx

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• Lsass.exe on Vista constantly reads and writes three times. How can I stop this please?

  After starting calm down.  Task Manager indicates that LASS. EXE continuously reads and writes.  It shows three readings and three written a couple of times per second.  The readings are still 204 bytes and the writing are always 132 bytes.  This action stops.

  I searched the web for answers and tried all the suggestions and nothing worked.

  Any ideas please?

  Hello

  I suggest you go through the link that talks about a similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/03638144-f4da-4349-B246-a27ec3727e70

  You can also post your question to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• with third party applications, I can read and write on the external drive HFS + for windows?

  Hello

  I see with third party app I can read and write to external disk NTFS on the mac computer.

  then othrwise, then I can read and write on extern hardrive HFS + with application of third party windows computer.  So who are the best third-party applications to read and write HFS and if they are free of charge on the external drive?

  Thank you

  Johan

  Now that I understand your goal, check out http://www.ufsexplorer.com/rdr_hfsp.php but your YMMV.